A matched feed and water setup for a small backyard flock: the 3.5 L Small Feeder and the 4 L Twin Cup Drinker, both compact enough for coops and pens where height is tight. Made in Australia with genuine German Lubing cups. The hooded feeder base stops feed being flicked out, and the float fills each cup automatically as your hens drink.
  • Feeder 3.5 L (about 2.6 kg of feed), suits 2 to 6 hens; drinker holds 4 L
  • In the box: 1 feeder, 1 drinker, 2 Lubing cups with floats, 2 mounting kits
  • Brackets and screws supplied for each unit; feeder mounts to timber
  • 3-year warranty on feeder and drinker; 1 year on Lubing cups
Australian Made and Owned
AUSTRALIAN MADE AND OWNED
Dine-A-Chook feeders and drinkers are made in Australia, supporting Aussie jobs.

Fresh feed and clean water for a small flock, from two compact units

The Dine-A-Chook Small Chicken Feeder and Twin Cup Drinker suit small backyard flocks, and their height makes them easy to install in pens and coops where height is restricted. Feed stays in the feeder instead of on the ground, and the two Lubing drinker cups let your hens reach water without competing while keeping it clean. All Dine-A-Chook feeders and drinkers are made in Australia, with genuine German Lubing cups.

Feeder
3.5 L / 2.6 kg
Drinker
4 L, 2 Lubing cups
Made in
Australian Made and Owned
Australia
Warranty
3 years (cups 1 year)

At a glance

How it works

Feeder: turn the handle on the lid to lift it off, pour in feed and twist it back on. Feed gravity-feeds into a hooded base opening; the hood gives your hens room to eat but the shape stops them flicking, raking or billing feed out. No moving parts, no training. Drinker: it fills from the top, in place. The reservoir is protected from contamination. Each Lubing cup refills automatically as the water level drops, nothing for your hens to press, and the upgraded Dine-A-Chook floats let more water into each cup.

Which flock size?

The Small Feeder suits flocks of around 2 to 6 hens and holds around 5 days of feed for six hens on quality complete pellets. For water, allow about 500 ml per hen per day, so the 4 L drinker holds a day's water for 8 hens; with 2 hens it should last about 4 days. Consumption varies with weather, diet and breed, so check the drinker regularly, especially in hot weather.

What is in the box

The feeder mounts directly to timber with its steel brackets and self-tapping screws. Mounting to wire mesh? You will need the Wire Mesh Mounting Kit, sold separately.

Specifications

Feeder: capacity3.5 L (about 2.6 kg of feed)
Feeder: suits2 to 6 hens
Feeder: height541 mm
Feeder: width127 mm
Feeder: weight1 kg empty
Feeder: materialUV-resistant ASA plastic
Drinker: capacity4 L
Drinker: cups2 x German Lubing cups with upgraded floats
Drinker: height542 mm
Drinker: width130 mm
Drinker: weight700 g with cups
Drinker: materialUV-treated ASA plastic, BPA free
Made inAustralia (Lubing cups made in Germany)
Warranty3 years on feeder and drinker; 1 year on Lubing cups

Built to last

Every feeder component is injection moulded in Brisbane and assembled in Townsville, and the drinker is Australian made except for its German Lubing cups. The feeder's UV-resistant ASA plastic handles sun and rain year after year, and it has no moving parts to jam, seize or break. The drinker is UV-treated ASA plastic, BPA free with no chemicals or glues, and blocks UV to reduce algae and mould growth.

Feed advice and care

The feeder works best with quality complete feed, crumble or pellets, for balanced nutrition and less selective eating. If the feed level looks low in the tray, that is by design: push a finger into the opening, and if you can move the feed, your chickens can reach it. Rinse the Lubing cups under warm running water weekly and give them a full clean every few months; they will last many years if looked after.