THIS KIT IS NOT INTENDED FOR USE IN 2007 AND NEWER VEHICLES WITH NEWER EMISSIONS STANDARDS

We will need the following information about your vehicle when ordering a conversion kit:
1.  Fill Nozzle Type (Read the Fill Nozzle Options section below.
2.  Year of Vehicle
3.  Make of Vehicle
4.  Model of Vehicle
5.  Number of Cylinders
6.  Engine Size in Liters
7.  Comments (Leave any additional information or comments you may have.)

Fill Nozzle Options
We have two fill nozzle options.
1.  Standard fill nozzle with 1/4 turn shutoff valve with 2 ports so it can be installed in-line from the cylinder to the regulator.  This is what you should order unless you need one of the other options.
2.  Strait nozzle without shutoff valve.  For installing in tight or hard to get to locations.  Comes with an extra 1/2 length roll of tubing.  It is connected directly to the tank valve.  The regulator is connected directly to the other port of the tank valve.

Pressure Switch Option (not included)
To run CNG only when the throttle is pushed, order our Pressure switch model DPS to install on the pressure side of the turbo.  This will prevent the CNG from coming on while at idle or while coasting.  Instructions and a wiring diagram come with the pressure switch. This item can only be used with turbo diesel engine

Stainless Steel Fittings Option (not included)
For a small additional cost we can supply 1/4" or 3/8" stainless steel fittings so you can install stainless steel tubing instead of the steel tubing that comes with our kits.  We do not supply the stainless steel tubing.  We recommend our steel tubing as it is lower in cost and much easier to install.  Call to order if desired.

How the Diesel Kit Works
This is an easy to install kit on diesel engines with a turbo.
This is a dual fuel kit so the engine runs on both diesel and CNG at the same time.
This kit will provide the engine with more power because the high octane of CNG and the high compression of a diesel engine are compatible, and extra fuel is added to the combustion process.
The regulator is easily adjusted with the idle screw on the regulator so you get little or no CNG while at an idle.  As you accelerate the engine will suck CNG from the regulator and into the air intake.  The more throttle the more CNG.  You will use less diesel as you will use less throttle.  You will get about 25% more power.  Most engines will use about 50% CNG and 50% diesel, and with no other adjustments needed. No programming of the controller is needed with this kit.  The CNG is fed into the air intake hose before the turbo.  The control on the dash lets you know if the CNG is being used and how much CNG is in the CNG tank.  You can turn the CNG off or on with the push of a button on the dash.  If you run out of CNG you will loose the power gained using CNG and continue just running on diesel.  

Your overall savings depend on the price difference between CNG and Diesel fuel.

Compressed Natural Gas (CNG) is one of the lowest cost and environment friendly alternative fuels available. More than 12 million cars in the world are driving on CNG. All you need is a CNG Conversion Kit, a CNG Tank with Valve and a Mounting Bracket for the Tank.
You can use multiple tanks for a longer driving range with any of our conversion kits.

Why CNG?
OIL FREE - Natural Gas is Produced in the USA
SAVE - Costs up to 80% Less than Gasoline
CLEAN - Fewer Emissions Save the Environment
SAFE - CNG Kits and Tanks Built to ISO or DOT Safety Standards
EASY - Filling Your Car is Nearly as Fast and Easy


When is the best time to buy?
Buy while gasoline prices are low and our prices are the lowest. When gasoline prices are high our prices may go up and we may run out of stock as demand is very high.

New Price Matching
We will match the price of any USA stocking competitors advertised price on any comparable CNG kits, parts or tanks.

We have kits for every engine.
We have conversion kits for all gasoline engines and a low cost kit for diesel engines.
We design all of our kits ourselves, and we manufacturer some of the parts. Some of our parts are imported from other countries. Some parts are built in the USA.
We have chosen the best parts with the best prices to provide the best kits available at the best price.
All our kits are rated for 3,600 psi and come complete with everything you need including the filling nozzle. CNG storage tanks, tank valves, fittings and mounting brackets are sold separately and are available in our EWS Store.
You can use any type of CNG tanks with our kits.
You can install multiple tanks for a longer driving range.
You can fill from 3,000 or 3,600 psi filling stations with our filling nozzle.

Warranty
All our conversion kits, tanks, and parts have a 1 year parts warranty.

Stainless Steel Fittings Option
For a small additional cost we can supply 1/4" or 3/8" stainless steel fittings so you can install stainless steel tubing instead of the steel tubing that comes with our kits.  We do not supply the stainless steel tubing.  We recommend our steel tubing as it is lower in cost and much easier to install.  Call to order if desired.

As with any Compressed Gas product, professional installation is strongly recommended. 

Click Here To See Our Other Products In Our Ebay Store