Remote Keyless Car Alarms Central Locking Car Accessories      
   
ALL our products are BRAND NEW

 

van sliding door contact sets enable the door motor in a vehicles sliding door to be connected to the central locking circuit when the door is shut, 
this prevents the door motor being permanently wired and therefore interfere with the sliding door opening/closing.
It is used to feed a power in to the sliding doors for central locking and car alarm installation. 
Also it can be used for electric windows, speakers or any other electric application 
Sliding door contact designed to easily get power to the door lock actuators mounted in the sliding door on vans.


 Package Contents:
  • 1x Kit (per door) Sliding Door Contacts

cable door locking conversion kit



 
 


Notes *
Note 1. Cable operated door locks
For vehicles with cable operated door locks, such as Ford, Mercedes  Sprinter/Vito, and some newer cars, You need this additional item:  Allows aftermarket actuators to work with cable door lock systems  Cable door lock adaptor
 
Note 2. Total Closure / Window Closure
If your vehicle has total closure this kit will close the windows without any additional interfaces.
You can tell if your vehicle has total closure if the windows close when you hold the drivers door key in the locked position.
If you don’t have total closure and want to close the windows when the alarm is armed;
then you will need a  window closure module.

Note 3. Boot Release Wire: Trunk  Release Output
Some cars have an electric boot release or one can be added. This can be  interfaced with this kit.
For cars with a built in boot release the wire is  found at the keyless entry module under the dash
or behind a kick panel. If  you want to Convert your manual boot release to electric release;
then you  will need a  Electric Boot Release Kit