Description

Description:

1. Name: Battery over-discharge protection module

2. Model: XH-M609(HCW-M635)

3. Input voltage: DC12-36V

4. Display accuracy: 0.1V

5. Control accuracy n: 0.1V

6. Voltage error: +/-0.1V

7. Scope of application: 12-36 lithium battery

8.The output voltage is equal to the input voltage

9. Product size: 57*42*19mm

- Programmable battery low voltage disconnect switch for DC 12-36V lead acid battery and lithium ion battery. It's a protection switch module, not included batteries itself.

- On-board momentary push button to set the low voltage disconnect parameter and 3 digit red LED display the parameter easy to operation

- When the battery voltage reach the setting values, the module will disconnect load automatically to avoid the battery from over discharging to prolong the battery lifetime

- Display is accurate, the switch module is quickly to open and close when near minimum voltage; Settings is stored non-volatile, it can keep set when power off.

Specifications:

- Input Voltage Range: DC 12-36V

- Control Accuracy: 0.1V

- Compatible Battery: lead acid, lithium ion battery, solar panel battery

- Board Size: 57 X 42 X 19mm (L*W*H)

Operation Instructions:

1. Double-click the + number button, then press + or - button, set the stop voltage value

2. Double click on the-number button, then press + or - button, set the return voltage value

3. Press the + number button, then press + or - button, calibrate the input voltage display value

4. Press the - number button, then press + or - button, set the latency start value T. At the time of the output voltage reaches the start value, after the delay T, there is a voltage output, the delay time is 0 ~ 10 minutes, the display category is: 000 or 001 or 005 or 010

5. Click the + number button to view the stop voltage value

6. Click the - number button to view the return voltage value

7. The difference in the difference can be set to 48V, minimum can be set to 0.5V