Wind Coverage • Replaceable Filter • Integrated Lens

Winter Cycling Face Mask with Eye Shield

Cold-weather riding mask with ventilation valve, nose clip and replaceable activated-carbon filter

Integrated Eye Shield Replaceable Filter Hook-and-Loop Fit Free Australia Shipping
WINTER

Additional Face Coverage for Cold-Weather Riding

Designed for cycling and other suitable outdoor activities, this face covering combines a breathable mesh-style body, integrated eye shield, adjustable nose clip, replaceable filter and rear hook-and-loop fastening. It helps reduce direct exposure to cold wind and ordinary airborne dust during recreational use.

Important: No protective certification or filtration efficiency has been supplied. This product is not described as certified respirator, medical PPE, industrial respiratory protection or safety eyewear.

Key Features

Integrated Eye Shield
The attached lens provides basic coverage around the eye area. Its anti-fog performance will vary with fit, temperature, humidity and activity level.
Replaceable Activated-Carbon Filter
A replaceable liner is designed to help reduce exposure to ordinary nuisance dust and some odours during suitable non-hazardous use.
Exhalation Valve
The fitted valve provides an outlet for exhaled air and can be removed when replacing the internal filter element.
Adjustable Nose Clip
The nose section can be shaped for a closer fit and to help reduce movement around the bridge of the nose.
Rear Hook-and-Loop Fastening
Secures behind the neck and allows limited adjustment for different adult head and face shapes.

Suitable Recreational Uses

1
 Winter cycling: Provides additional face coverage during suitable cold-weather bicycle rides.
2
 Mountain biking: Helps reduce direct contact with wind and ordinary trail dust in non-hazardous environments.
3
 General outdoor activity: Suitable as a casual wind-covering accessory when unrestricted vision and breathing are maintained.

Colour Options

Grey Red White Black Black/Grey Black/White Light Blue

Colour names may appear with an “AZ” prefix in the variation menu. Select the required colour before purchasing.

Product Specifications

Product Type Winter cycling face mask with eye shield
Brand Unbranded
Main Material Supplier-stated organic cotton with breathable mesh-style fabric
Filter Type Replaceable activated-carbon liner
Ventilation Removable exhalation valve
Fastening Rear hook-and-loop closure
Fit One size; suitability depends on individual head and face shape
Flat Length Approximately 32cm
Flat Width Approximately 15.5cm
Approximate Weight 46g
High-Concerned Chemical None specified
Country/Region of Manufacture Guangdong, China

Package Options

Cycling Mask and/or Replacement Filters
Filter options may include 5 or 20 pieces. Exact contents depend on the variation selected, so please check the variation title and photographs before ordering.

How to Replace the Filter

1. Open the valve: Rotate the air valve in the direction marked “OPEN”.
2. Remove carefully: Pull the loosened valve away without forcing or bending its fittings.
3. Replace the liner: Remove the used filter and position a clean compatible replacement correctly inside the mask.
4. Secure the valve: Refit and rotate it fully in the direction marked “CLOSE”.

Product FAQs

Will the eye shield remain completely fog-free?
Fogging cannot be ruled out. Results depend on facial fit, valve position, breathing rate, temperature, humidity and weather conditions.
Does it protect against hazardous particles or illness?
No certified filtration rating has been supplied. Do not rely on it for viruses, toxic dust, chemicals, smoke, fumes, industrial hazards or any situation requiring approved respiratory protection.
Is the mask washable?
The supplier describes the mask body as water washable. Remove the filter and detachable components first, rinse gently without rubbing and allow it to dry naturally before reassembly.
Does one size fit everyone?
No. The mask is sold as one size, but comfort and coverage depend on individual head size, face shape and fastening adjustment.
Is Australian delivery free?
Yes, this listing includes free shipping within Australia, subject to the delivery coverage shown on the listing.

Important Safety Information

  • This product is a recreational wind and nuisance-dust face covering, not certified respiratory protective equipment.
  • Do not use for viruses, hazardous dust, wildfire smoke, chemicals, gases, fumes, industrial work or low-oxygen environments.
  • The exhalation valve allows outward airflow and may be unsuitable where source-control face coverings are required.
  • The integrated lens is not certified safety eyewear and does not provide verified impact, chemical or ultraviolet protection.
  • Check that vision, breathing and head movement remain unrestricted before cycling.
  • Do not continue riding if the lens fogs, shifts or limits your field of view. Stop safely and adjust or remove the mask.
  • Do not use if you experience breathing difficulty, dizziness, overheating, skin irritation or discomfort.
  • Replace the filter when visibly dirty, damaged, wet, difficult to breathe through or affected by persistent odour.
  • Never wash or reuse a disposable filter unless its packaging specifically states that it is washable.
  • Keep away from flames and high heat. Do not use while charging devices or around ignition sources.
  • Inspect the valve, lens, stitching, nose clip and fastening before every use.
  • Dimensions and colours may vary slightly because of manual measurement, lighting and manufacturing batches.
Thank You for Shopping with Values Good
Practical outdoor accessories, clear descriptions and a buyer-friendly Australian shopping experience.
FREE AUSTRALIA SHIPPING