1000W 400W 600W 750W AC Servo Motor Driver Controller CNC Kit 220V pulse signal 5V Optical Encoder
This model features a 5V controller pulse signal. If you need a 24V controller pulse signal, please contact customer service.

Package include:

400W  (without brake)
1x A2-60SV 01330 AC servo motor
1x S2-SVD15 AC servo driver
1x 3m power cable
1x3m encoder cable

600W (without brake) 
1x A2-60SV 01930 AC servo motor
1x S2-SVD15 AC servo driver
1x 3m power cable
1x3m encoder cable

750W  (without brake) 
1x A2-80SV 02430 AC servo motor
1x S2-SVD15 AC servo driver
1x 3m power cable
1x3m encoder cable

1000W (without brake) 
1x A2-80SV 03230 AC servo motor
1x S2-SVD20 AC servo driver
1x 3m power cable
1x3m encoder cable


400W  (with brake)
1x A2-60SV 01330Z AC servo motor
1x S2-SVD15 AC servo driver
1x 3m power cable
1x3m encoder cable

600W (with brake) 
1x A2-60SV 01930Z AC servo motor
1x S2-SVD15 AC servo driver
1x 3m power cable
1x3m encoder cable

750W  (with brake) 
1x A2-80SV 02430Z AC servo motor
1x S2-SVD15 AC servo driver
1x 3m power cable
1x3m encoder cable

1000W (with brake) 
1x A2-80SV 03230Z AC servo motor
1x S2-SVD20 AC servo driver
1x 3m power cable
1x3m encoder cable

Pls Note: English manual will be sent via message.

Product Description

400W without brake

Servo Motor Parameters:

  • Model: A2-60SV01330P5
  • Power: 400W
  • Rated power supply: 220V
  • With brake: NO
  • Number of poles: 5
  • Rated torque: 1.27 N.m
  • Instantaneous max torque: 3.82 N.m
  • Rated speed: 3000rpm/min
  • Max speed: 6000rpm/min
  • Rated current: 2.8A±10%
  • Instantaneous max current: 8.4±10%
  • Moment coefficient ( Nm/A ): 0.42±10%
  • Back EMF Coefficient ( X10V/rpm ): 27.5±10%
  • Resistant( Ω ): : 3±10% ( 20℃ )
  • Inductance: 7.8±20% mH ( 20℃ )
  • Moment of inertia ( X10V/rpm ): 0.68±10%
  • Max radial load: 245
  • Max axial load: 74
  • Ender resolution: 10000ppr
  • Protection structure: IP65
  • Insulation class: F
  • Insulation Resistance: More than 20mΩ DC500V
  • Insulation withstande voltage: AC 1500V 1 minutes
  • Bibration level: Rated A for operation
  • Turn around: F0rward turn command view from load sid,counterclockwise ( CCW )
  • Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).
  • Inpact Strength: 98m/S²
  • Vibration resistance: 49m/S²
  • Rated voltage DC ( V ): 24±10%
  • Rated power: 0.3
  • Static torque: ≥ 1.5
  • Insulation resistance: ＞500
  • Resistance to high voltage: 1500V/1S/5mA
  • Rotary clearance: ≤ 0.5
  • Operating ambient temperature: -10 - +40
  • Attract Time: ≤ 50
  • Release Timeattract voltage: ≤ 20
  • The release of the voltage: ≤19.2
  • Running noise: ＞1.5
  • Running noise: ＜60

400W with brake

AC servo motor kit


400W Servo Motor Kit

Servo Motor Parameters:

  • Model: A2-60SV01330P5Z
  • Power: 400W
  • Rated power supply: 220V
  • With brake: Yes
  • Number of poles: 5
  • Rated torque: 1.27 N.m
  • Instantaneous max torque: 3.82 N.m
  • Rated speed: 3000rpm/min
  • Max speed: 6000rpm/min
  • Rated current: 2.8A±10%
  • Instantaneous max current: 8.4±10%
  • Moment coefficient ( Nm/A ): 0.42±10%
  • Back EMF Coefficient ( X10V/rpm ): 27.5±10%
  • Resistant( Ω ): : 3±10% ( 20℃ )
  • Inductance: 7.8±20% mH ( 20℃ )
  • Moment of inertia ( X10V/rpm ): 0.68±10%
  • Max radial load: 245
  • Max axial load: 74
  • Ender resolution: 10000ppr
  • Protection structure: IP65
  • Insulation class: F
  • Insulation Resistance: More than 20mΩ DC500V
  • Insulation withstande voltage: AC 1500V 1 minutes
  • Bibration level: Rated A for operation
  • Turn around: F0rward turn command view from load sid,counterclockwise ( CCW )
  • Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).
  • Inpact Strength: 98m/S²
  • Vibration resistance: 49m/S²
  • Rated voltage DC ( V ): 24±10%
  • Rated power: 0.3
  • Static torque: ≥ 1.5
  • Insulation resistance: ＞500
  • Resistance to high voltage: 1500V/1S/5mA
  • Rotary clearance: ≤ 0.5
  • Operating ambient temperature: -10 - +40
  • Attract Time: ≤ 50
  • Release Timeattract voltage: ≤ 20
  • The release of the voltage: ≤19.2
  • Running noise: ＞1.5
  • Running noise: ＜60

600W without brake:

Servo Motor Parameters:

  • Model: A2-60SV01930
  • Power: 600W
  • Rated power supply: 220V
  • With brake: NO
  • Number of poles: 5
  • Rated torque: 1.91N.m
  • Instantaneous max torque: 5.73N.m
  • Rated speed: 3000rpm/min
  • Max speed: 6000rpm/min
  • Rated current: 4A±10%
  • Instantaneous max current( A ): 12±10%
  • Moment coefficient ( Nm/A ): 0.54±10%
  • Back EMF Cofficient ( X10V/rpm ): 32.5±10%
  • Resistant: 3.2Ω±10% ( 20℃ )
  • Inductance : 8.4±20% mH ( 20℃ )
  • Moment of inertia ( X10V/rpm ): 0.82±10%
  • Max radial load: 245
  • Max axial load: 74
  • Ender resolution: 10000ppr
  • Protection structure: IP65
  • Insulation class: F
  • Insulation Resistance: More than 20mΩ DC500V
  • Insulation withstande voltage: AC 1500V 1 minutes
  • Bibration level: Rated A for operation
  • Turn around: Forward turn command view from load sid,counterclockwise ( CCW )
  • Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).
  • Inpact Strength: 98m/S²
  • Vibration resistance: 49m/S²
  • Rated voltage DC ( V ): 24±10%
  • Rated power: 0.3
  • Static torque: ≥ 2
  • Insulation resistance: ＞500
  • Resistance to high voltage: 1500V/1S/5mA
  • Rotary clearance: ≤ 0.5
  • Operating ambient temperature: -10 - +40
  • Attract Time: ≤ 50
  • Release Timeattract voltage: ≤ 20
  • The release of the voltage: ≤19.2
  • Running noise: ＞1.5
  • Running noise: ＜60

600W with brake:
400W Servo Motor Kit

Servo Motor Parameters:

  • Model: A2-60SV01930Z
  • Power: 600W
  • Rated power supply: 220V
  • With brake: Yes
  • Number of poles: 5
  • Rated torque: 1.91N.m
  • Instantaneous max torque: 5.73N.m
  • Rated speed: 3000rpm/min
  • Max speed: 6000rpm/min
  • Rated current: 4A±10%
  • Instantaneous max current( A ): 12±10%
  • Moment coefficient ( Nm/A ): 0.54±10%
  • Back EMF Cofficient ( X10V/rpm ): 32.5±10%
  • Resistant: 3.2Ω±10% ( 20℃ )
  • Inductance : 8.4±20% mH ( 20℃ )
  • Moment of inertia ( X10V/rpm ): 0.82±10%
  • Max radial load: 245
  • Max axial load: 74
  • Ender resolution: 10000ppr
  • Protection structure: IP65
  • Insulation class: F
  • Insulation Resistance: More than 20mΩ DC500V
  • Insulation withstande voltage: AC 1500V 1 minutes
  • Bibration level: Rated A for operation
  • Turn around: Forward turn command view from load sid,counterclockwise ( CCW )
  • Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).
  • Inpact Strength: 98m/S²
  • Vibration resistance: 49m/S²
  • Rated voltage DC ( V ): 24±10%
  • Rated power: 0.3
  • Static torque: ≥ 2
  • Insulation resistance: ＞500
  • Resistance to high voltage: 1500V/1S/5mA
  • Rotary clearance: ≤ 0.5
  • Operating ambient temperature: -10 - +40
  • Attract Time: ≤ 50
  • Release Timeattract voltage: ≤ 20
  • The release of the voltage: ≤19.2
  • Running noise: ＞1.5
  • Running noise: ＜60

750W without brake:


750W Servo Motor Kit

Servo Motor Parameters:

  • Model: A2-80SV02430
  • Power: 750W
  • Rated power supply: 220V 220V
  • With brake: No
  • Number of poles: 5
  • Rated torque: 2.4 N.m
  • Instantaneous max torque: 7.2 N.m
  • Rated speed: 3000rpm/min
  • Max speed: 5000rpm/min
  • Rated current: 4.8A±10%
  • Instantaneous max current: 14.4±10%
  • Moment coefficient ( Nm/A ): 0.5±10%
  • Back EMF Coefficient ( X10V/rpm ): 33.2±10%
  • Resistant( Ω ): : 1.6±10% ( 20℃ )
  • Inductance: 9.5±20% mH ( 20℃ )
  • Moment of inertia ( X10V/rpm ): 1.72±10%
  • Max radial load: 392
  • Max axial load: 174
  • Ender resolution: 10000ppr
  • Protection structure: IP65
  • Insulation class: F
  • Insulation Resistance: More than 20mΩ DC500V
  • Insulation withstande voltage: AC 1500V 1 minutes
  • Bibration level: Rated A for operation
  • Turn around: F0rward turn command view from load sid,counterclockwise ( CCW )
  • Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).
  • Inpact Strength: 98m/S²
  • Vibration resistance: 49m/S²
  • Rated voltage DC ( V ): 24±10%
  • Rated power: 0.3
  • Static torque: ≥ 4
  • Insulation resistance: ＞500
  • Resistance to high voltage: 1500V/1S/5mA
  • Rotary clearance: ≤ 0.5
  • Operating ambient temperature: -10 - +40
  • Attract Time: ≤ 60
  • Release Timeattract voltage: ≤ 20
  • The release of the voltage: ≤19.2
  • Running noise: ＞1.5
  • Running noise: ＜60

750W with Brake

750W Servo Motor Kit

Servo Motor Parameters:

  • Model: A2-80SV02430Z
  • Power: 750W
  • Rated power supply: 220V
  • With brake: Yes
  • Number of poles: 5
  • Rated torque: 2.4 N.m
  • Instantaneous max torque: 7.2 N.m
  • Rated speed: 3000rpm/min
  • Max speed: 5000rpm/min
  • Rated current: 4.8A±10%
  • Instantaneous max current: 14.4±10%
  • Moment coefficient ( Nm/A ): 0.5±10%
  • Back EMF Coefficient ( X10V/rpm ): 33.2±10%
  • Resistant( Ω ): : 1.6±10% ( 20℃ )
  • Inductance: 9.5±20% mH ( 20℃ )
  • Moment of inertia ( X10V/rpm ): 1.72±10%
  • Max radial load: 392
  • Max axial load: 174
  • Ender resolution: 10000ppr
  • Protection structure: IP65
  • Insulation class: F
  • Insulation Resistance: More than 20mΩ DC500V
  • Insulation withstande voltage: AC 1500V 1 minutes
  • Bibration level: Rated A for operation
  • Turn around: F0rward turn command view from load sid,counterclockwise ( CCW )
  • Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).
  • Inpact Strength: 98m/S²
  • Vibration resistance: 49m/S²
  • Rated voltage DC ( V ): 24±10%
  • Rated power: 0.3
  • Static torque: ≥ 4
  • Insulation resistance: ＞500
  • Resistance to high voltage: 1500V/1S/5mA
  • Rotary clearance: ≤ 0.5
  • Operating ambient temperature: -10 - +40
  • Attract Time: ≤ 60
  • Release Timeattract voltage: ≤ 20
  • The release of the voltage: ≤19.2
  • Running noise: ＞1.5
  • Running noise: ＜60
S2SVD15 Servo Driver

servo controller

Wiring diagram of S2-SVD servo driver

CN1 port:

Support RS-232 and RA-485 interfaces, adopts Modbus communication protocol, and can be connected to upper computer devices such as PC and PLC.

CN2 port:

  • Upper computer singal cable. Can be connected to CNC system, programmable controller or other upper device.

CN3 port:

  • Encoder cable. Connected to servo motor.

L1 / L2:

  • Input power supply.

B+ / B1 / B2:

  • Braking resistor terminal.

U / V / W:

  • Motor power cable. The four motor power cables must be connected to the correspoonding teiminals of the driver and cannot be connected incorrectly.

PE:

  • Ground terminal of the driver.

servo motor

servo motor high torque

servo

Display Screen

  1. Mode selection key: Mode switching and return to the parent directory.
  2. Number increase key: Increase the number, and long press will have repeated effect.
  3. Number reduction key: Decrease the number, and long press has a repeating effect.
  4. Shift key: Cursor shift.
  5. OK key: Determine setting and End parameter setting.

Note

When the display screen shows Fnxxx, Dnxxx, Pnxxx, it is in the top directory, and the mode key is the mode switching function, which can directly switch to othe modes. Otherwise, the mode key is the fuction of returning to the upper directory.

Driver Parameters:

  • Model: S2SVD15
  • Maximum current: 15A
  • Input voltage: AC220V (50Hz)
  • Cooling method: Heat dissipation air cooling
  • Equipped with 17‑bit optical encoder
servo motor driver

DEFINITION OF CONTROL PORT CN2 PIN ( Interface No-Pin-Name-Fuctiom)

NO.9 (DC12-24V), NO.10(COM) :

  • Power supply and gound of inout/output control singal.

NO.6 ( sigin1: servo cable ), NO.7 ( sigin2: alarm reset ), NO.8 ( sigin3: position deviation clearing ), NO.9 ( sigin4: pulse input disable ) :

  • Input command signal. Functions assigned to each input signal port at the factory.

NO.2 ( sigout1: PV,open collector input power supply ), NO.3 ( sigout2: PP+ ), NO.14 ( sigout3: PP- ), NO.4 ( sigout4: PD+ ), NO.5 ( sigout4: PD- ) :

  • The command pulse can beinput in three different ways:
  1. Command direction and pulse input
  2. Clockwise/counterclockwise pulse input
  3. Quadrature pulse input with 90 degree phase difference.

NO.20 ( empty ), NO.19 ( empty ), NO.18 ( empty ), NO.17 ( empty ), NO.15 ( empty ), NO.16 ( empty ), NO.22 ( OZ ), NO.1 ( GND ) :

  • Contact the manufacturer for encoder output function.

NO.25 ( verf ), NO.13 ( AGND ) :

  • Analog voltage input port. When speed or torque is controlled, it is used to receive speed or torque commands. Voltage input range: -10V~+10V.



1000W without brakeAC servo motor kit

1000W Servo Motor Kit

Servo Motor Parameters:

  • Model: A2-80SV03230
  • Power: 1000W
  • Rated power supply: 220V
  • With brake: No
  • Number of poles: 5
  • Rated torque: 3.8 N.m
  • Instantaneous max torque: 11.4 N.m
  • Rated speed: 2500rpm/min
  • Max speed: 3000rpm/min
  • Rated current: 1.8A±10%
  • Instantaneous max current: 14.4±10%
  • Moment coefficient ( Nm/A ): 0.93±10%
  • Back EMF Coefficient ( X10V/rpm ): 56±10%
  • Resistant( Ω ): : 3±10% ( 20℃ )
  • Inductance: 19±20% mH ( 20℃ )
  • Moment of inertia ( X10V/rpm ): 2.4±10%
  • Max radial load: 392
  • Max axial load: 147
  • Ender resolution: 10000ppr
  • Protection structure: IP65
  • Insulation class: F
  • Insulation Resistance: More than 20mΩ DC500V
  • Insulation withstande voltage: AC 1500V 1 minutes
  • Bibration level: Rated A for operation
  • Turn around: F0rward turn command view from load sid,counterclockwise ( CCW )
  • Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).
  • Inpact Strength: 98m/S²
  • Vibration resistance: 49m/S²
  • Rated voltage DC ( V ): 24±10%
  • Rated power: 0.3
  • Static torque: ≥ 4
  • Insulation resistance: ＞500
  • Resistance to high voltage: 1500V/1S/5mA
  • Rotary clearance: ≤ 0.5
  • Operating ambient temperature: -10 - +40
  • Attract Time: ≤ 60
  • Release Timeattract voltage: ≤ 20
  • The release of the voltage: ≤19.2
  • Running noise: ＞1.5
  • Running noise: ＜60


1000W with brake

1000W Servo Motor Kit

Servo Motor Parameters:

  • Model: A2-80SV03230Z
  • Power: 1000W
  • Rated power supply: 220V
  • With brake: Yes
  • Number of poles: 5
  • Rated torque: 3.8 N.m
  • Instantaneous max torque: 11.4 N.m
  • Rated speed: 2500rpm/min
  • Max speed: 3000rpm/min
  • Rated current: 1.8A±10%
  • Instantaneous max current: 14.4±10%
  • Moment coefficient ( Nm/A ): 0.93±10%
  • Back EMF Coefficient ( X10V/rpm ): 56±10%
  • Resistant( Ω ): : 3±10% ( 20℃ )
  • Inductance: 19±20% mH ( 20℃ )
  • Moment of inertia ( X10V/rpm ): 2.4±10%
  • Max radial load: 392
  • Max axial load: 147
  • Ender resolution: 10000ppr
  • Protection structure: IP65
  • Insulation class: F
  • Insulation Resistance: More than 20mΩ DC500V
  • Insulation withstande voltage: AC 1500V 1 minutes
  • Bibration level: Rated A for operation
  • Turn around: F0rward turn command view from load sid,counterclockwise ( CCW )
  • Surroundings: Temperature-20℃-40℃, humidity 20%-80% RH ( no condensation ), altitude below 1000; Temperature-20℃-60℃, ( no freezing ), humidity 20%-80% RH ( no condensation ).
  • Inpact Strength: 98m/S²
  • Vibration resistance: 49m/S²
  • Rated voltage DC ( V ): 24±10%
  • Rated power: 0.3
  • Static torque: ≥ 4
  • Insulation resistance: ＞500
  • Resistance to high voltage: 1500V/1S/5mA
  • Rotary clearance: ≤ 0.5
  • Operating ambient temperature: -10 - +40
  • Attract Time: ≤ 60
  • Release Timeattract voltage: ≤ 20
  • The release of the voltage: ≤19.2
  • Running noise: ＞1.5
  • Running noise: ＜60


S2SVD20  Servo Driver

servo controller

Wiring diagram of S2-SVD servo driver

CN1 port:

  • Support RS-232 and RA-485 interfaces, adopts Modbus communication protocol, and can be connected to upper computer devices such as PC and PLC.

CN2 port:

  • Upper computer singal cable. Can be connected to CNC system, programmable controller or other upper device.

CN3 port:

  • Encoder cable. Connected to servo motor.

L1 / L2:

  • Input power supply.

B+ / B1 / B2:

  • Braking resistor terminal.

U / V / W:

  • Motor power cable. The four motor power cables must be connected to the correspoonding teiminals of the driver and cannot be connected incorrectly.

PE:

  • Ground terminal of the driver.

servo motor

servo motor high torque

servo

Display Screen

  1. Mode selection key: Mode switching and return to the parent directory.
  2. Number increase key: Increase the number, and long press will have repeated effect.
  3. Number reduction key: Decrease the number, and long press has a repeating effect.
  4. Shift key: Cursor shift.
  5. OK key: Determine setting and End parameter setting.

Note

When the display screen shows Fnxxx, Dnxxx, Pnxxx, it is in the top directory, and the mode key is the mode switching function, which can directly switch to othe modes. Otherwise, the mode key is the fuction of returning to the upper directory.

Driver Parameters:

  • Model: S2SVD20
  • Maximum current: 20A
  • Input voltage: AC220V (50/60Hz)
  • Cooling method: Heat dissipation air cooling
  • Equipped with 17‑bit optical encoder
servo motor driver

DEFINITION OF CONTROL PORT CN2 PIN ( Interface No-Pin-Name-Fuctiom)

NO.9 (DC12-24V), NO.10(COM) :

  • Power supply and gound of inout/output control singal.

NO.6 ( sigin1: servo cable ), NO.7 ( sigin2: alarm reset ), NO.8 ( sigin3: position deviation clearing ), NO.9 ( sigin4: pulse input disable ) :

  • Input command signal. Functions assigned to each input signal port at the factory.

NO.2 ( sigout1: PV,open collector input power supply ), NO.3 ( sigout2: PP+ ), NO.14 ( sigout3: PP- ), NO.4 ( sigout4: PD+ ), NO.5 ( sigout4: PD- ) :

  • The command pulse can beinput in three different ways:
  1. Command direction and pulse input
  2. Clockwise/counterclockwise pulse input
  3. Quadrature pulse input with 90 degree phase difference.

NO.20 ( empty ), NO.19 ( empty ), NO.18 ( empty ), NO.17 ( empty ), NO.15 ( empty ), NO.16 ( empty ), NO.22 ( OZ ), NO.1 ( GND ) :

  • Contact the manufacturer for encoder output function.

NO.25 ( verf ), NO.13 ( AGND ) :

  • Analog voltage input port. When speed or torque is controlled, it is used to receive speed or torque commands. Voltage input range: -10V~+10V.

cnc machine

Application Areas

Suitable for a variety of automation equipment and instruments, such as screw machines, automatic equipment, medical equipment, semiconductor equipment, engraving equipment, measuring equipment, AGV carts, etc.
Pls note:
 
The suffix name with the letter "Z" indicates the model with brake.

Warm reminder:
1. Your valid phone number is required, otherwise we cannot guarantee the safe arrival of the package.
2. The price and freight of the goods do not include import duties and other charges, which shall be paid by the buyer. Buyers should know in advance the tariffs required by the receiving country before purchasing.
3. Some countries need to provide the recipient's tax ID, such as South Africa, Chile, Peru, Mexico, South Korea and other countries.
4. After receiving the package, if there is any problem with the product, please contact us by leaving a message on ebay first. We'll get you sorted out. Please do not leave negative or neutral feedback without first contacting us. A satisfactory transaction for both buyer and seller is our goal.