Product Details

  • Consistent flow rate across variable pressures
  • Self-priming (water) and maintenance-free with low vibration and pulsation characteristics
  • Internal Relief Valve Standard-Non External adjust configuration
  • Integral Strainer for debris removal from pumping fluid
  • Low Lead Brass Housing Material
  • NPT 3/8" Inlet and Outlet Connections
  • Constructed with EPDM/Nitrile Elastomers
  • Flowrate of 125GPH (375LPH)*
  • Fluid Operating Temperature of between -4°F to 160°F (-20°C to 71°C)
  • Maximum Mechanical Horsepower required 0.57hp (425W)¹

* GPH rating at 1725RPM/60Hz and LPH rating at 1450RPM/50Hz¹ Mechanical Horsepower requirement based on pump tested with water at room temperature and maximum operating pressure 250psi (17.5BAR)

TECHNICAL SPECIFICATIONS

Have A Question? - Contact Us

Technical Information
Body MaterialBrass
Port Size3/8" NPT
Mounting TypeClamp-On
Drive ConfigurationDouble Flat
Flow Rate125 GPH / 375 LPH
ElastomerEPDM/Nitrile
Seal Type
Non Balances Ceramic/Carbon
RotationClockwise
Internal Component MaterialCarbon
Valve TypeBypass- Ultem
Valve Configuration
 Standard-Non External adjust
Agency Approvals
NSF STD. 169 Listed (0.2% Max Lead)

 

Operating Range
Maximum Mechanical Power Requirement0.57hp (425W)
Maximum System Pressure150 psi
Relief Valve Set Pressure Range151 to 250psi (10 to 17.5 BAR)
Max Static Pressure100 psi
Operation Fluid Temperature Range-4°F (-20°C) - 160°F (71°C)
Max Fluid Viscosity100 cP
Max Sound Level60dB(a)
Max Discharge Pressure250 psi
Min/Max Speed1000 - 2400 RPM
Dry Suction Lift3.3 ft
Wet Suction Lift6.6 ft
Fluid Acidity6 pH
Maximum Total Dissolved Solids (TDS)5000 ppm