DTP-06-2S to Anderson SB50 power cable, 1 meter configuration. Vehicle end is a DTP-06-2S sealed Deutsch-style connector. Accessory end is an Anderson SB50 quick-disconnect. Conductor is 12 AWG. Do not exceed 15 A in this application. The DTP side is sealed; the Anderson SB50 side is not IP-rated by default, so protect exposed connections. This is the 1 meter length; a 3 meter length is listed separately. It converts a DTP-06-2S power source to an Anderson SB50 connection for portable loads, power distribution and field service equipment, on the INEOS Grenadier and other vehicles with DTP-06-2S outlets. Not for direct battery connection without proper fuse protection. Verify the connector mating half and system current before ordering.
INEOS Grenadier | 1 Meter Configuration
DTP-06-2S to Anderson SB50 Cable, 1 Meter
DTP-06-2S on the vehicle end, Anderson SB50 on the accessory end, 1 meter long, 12 AWG conductor.
DTP-06-2S to Anderson SB50 Cable, 1 Meter
Confirmed Fitment
INEOS Grenadier and other vehicles with DTP-06-2S outlets
This listing is the 1 meter length. The 3 meter length is a separate listing. Not for direct battery connection without proper fuse protection.
1 meter
Cable length, this SKU
12 AWG
Conductor
15 A
Do not exceed
SB50 Anderson
Output connector
Why this part
DTP-06-2S input
DTP-06-2S input
Connects to the Grenadier's factory DTP power system. Sealed, locking connector for vehicle integration without wiring modification.
Anderson SB50 output
Anderson SB50 output
Robust, fast-connect Anderson connector, field-service friendly for portable equipment, power distribution and quick-disconnect work.
12 AWG conductor
12 AWG conductor
Heavy-gauge conductor for reliable power transfer up to 15 A continuous load in mobile applications.
Sealed on the vehicle side
Sealed on the vehicle side
The DTP side is sealed. The SB50 side is not IP-rated by default, so protect exposed connections.
Installation and prerequisites
Four checks before load
Four checks before load
-Confirm the source circuit fuse and the expected continuous current.
-Mate the DTP connector until it is fully locked.
-Connect the SB50 to the matching housing and perform a load test.
-Route the cable away from exhaust heat and articulation points.
Technical specifications
ProductDTP-06-2S to Anderson SB50 cable
Length1 meter, this configuration
Input connectorDTP-06-2S
Output connectorAnderson SB50
Conductor12 AWG
Recommended currentDo not exceed 15 A in this application
SealingDTP side sealed, SB50 side not IP-rated by default
Vehicle compatibilityINEOS Grenadier and other vehicles with DTP-06-2S outlets
Other length available3 meter, listed separately
Manufacturer part numberI-PWR-DA3
Designed and engineeredDVA Mechanics, USA
In the box
- 1x DTP-06-2S to Anderson SB50 cable, 1 meter
- DTP-06-2S connector on the vehicle end
- Anderson SB50 connector on the accessory end
Not included
- Inline fuse kit
- Battery terminals
- Distribution block
Questions this listing answers
Why SB50 on vehicle accessories?
SB50 is robust, fast to connect and field-service friendly.
Is this waterproof end to end?
No. The DTP side is sealed. The SB50 side is not IP-rated by default, so protect exposed connections.
Can I use it for inverter loads?
Only if current draw and fuse strategy stay within the rated use case. Do not exceed 15 A in this application.
Does it include an inline fuse?
No. Inline fuse kit, battery terminals and distribution block are not included. Confirm the source circuit fuse before use.
Which length is this?
This SKU is the 1 meter configuration. The 3 meter configuration is a separate listing.
Ships from Alpharetta, GeorgiaReturns accepted within 30 daysDVA Mechanics manufacturer warranty
DVA Mechanics
Built by owners, for owners
Built by owners, for owners
DVA Mechanics is run by INEOS Grenadier and Mercedes-Benz Sprinter owners. Every part is designed, fitted and driven on our own vehicles before it is sold.
Engineered, not adapted
Parts mount to factory hard points. No drilling, no cutting, no universal brackets that almost fit. Every product is reversible to stock.
Materials stated, not implied
Alloy, finish, hardware grade and load path are published on every listing. If a number is on the page, it traces to a drawing or a test.