Eco Friendly 1/2" Soaker Hose Porous Drip Irrigation Pipe Leaky Watering Garden

Porous Soaker Hose 1/2" – Efficient Garden Irrigation System This landscape grade porous soaker hose is designed to deliver water slowly and evenly along its entire length, allowing plants to receive moisture directly at the root zone. The hose is manufactured from durable recycled rubber, providing flexibility, long lifespan and reliable irrigation performance. Thanks to its porous structure, water gently seeps through the hose wall, ensuring consistent watering while significantly reducing water consumption compared to traditional sprinklers. The hose can be installed on the surface of the soil or buried underground, making it a perfect solution for gardens, vegetable beds, landscaping and greenhouse irrigation. Key Features ✔ Even water distribution along the full hose length✔ Water saving irrigation system (up to 70% water reduction)✔ Flexible and durable recycled rubber construction✔ Can be installed above ground or underground✔ Easy to cut and extend using connectors✔ Ideal for precise root watering Hose Versions Hoses between 7.5m and 30m are supplied with hose connectors for quick and easy connection to standard garden hose fittings. Longer irrigation hoses 50m and 100m are supplied as hose only, allowing custom system installation and extension. The 200m option is supplied as 2 × 100m hoses. Technical Information Hose diameter: 1/2 inch (12.5 mm)Recommended working pressure: 0.7 BARWater flow rate: 0.76 – 1.26 L/min per meterRecommended installation depth (if buried): 15–20 cmMaximum recommended loop length: 30 meters Recommended Water Pressure For best performance the porous soaker hose should operate at low water pressure. Optimal working pressure 0.5 – 0.7 BAR (7 – 10 PSI) At this pressure the hose releases water evenly along its entire length, ensuring efficient irrigation directly at the plant roots. If pressure is too low If the pressure is below 0.4 BAR, water may start dripping only from the beginning section of the hose, while the rest of the hose receives insufficient flow. If pressure is too high If the pressure exceeds 1 BAR, water may escape more rapidly near the end of the hose, which can lead to uneven watering and reduced irrigation efficiency. Recommended installation tips • For best results keep the irrigation line under 30 meters per loop• Use a pressure reducer or tap regulator if necessary• Lay the hose on level ground or bury it 15–20 cm below soil Professional tip For large irrigation systems it is recommended to install a pressure regulator (0.5–0.7 BAR) to maintain consistent water distribution along the entire hose. Soaker hoses are designed for low-pressure irrigation systems and should not be connected directly to high-pressure water sources without regulation. Ideal For • Vegetable gardens• Flower beds• Raised beds• Greenhouses• Shrubs and hedges• Landscape irrigation systems Important Information This hose is not suitable for drinking water. Do not use with hot water. Connectors included only on: 7.5m 15m 22.5m 30m Longer hoses supplied without connectors: 50m 100m 200m (2 × 100m) Accessories Connectors, hose joiners and mounting hooks are available separately in our other listings, allowing you to expand or customise your irrigation system according to your garden layout.

Eco Friendly 1/2" Soaker Hose Porous Drip Irrigation Pipe Leaky Watering Garden

Porous Soaker Hose 1/2" – Efficient Garden Irrigation System

This landscape grade porous soaker hose is designed to deliver water slowly and evenly along its entire length, allowing plants to receive moisture directly at the root zone. The hose is manufactured from durable recycled rubber, providing flexibility, long lifespan and reliable irrigation performance.

Thanks to its porous structure, water gently seeps through the hose wall, ensuring consistent watering while significantly reducing water consumption compared to traditional sprinklers.

The hose can be installed on the surface of the soil or buried underground, making it a perfect solution for gardens, vegetable beds, landscaping and greenhouse irrigation.

Key Features

✔ Even water distribution along the full hose length
✔ Water saving irrigation system (up to 70% water reduction)
✔ Flexible and durable recycled rubber construction
✔ Can be installed above ground or underground
✔ Easy to cut and extend using connectors
✔ Ideal for precise root watering

Hose Versions

Hoses between 7.5m and 30m are supplied with hose connectors for quick and easy connection to standard garden hose fittings.

Longer irrigation hoses 50m and 100m are supplied as hose only, allowing custom system installation and extension.

The 200m option is supplied as 2 × 100m hoses.

Technical Information

Hose diameter: 1/2 inch (12.5 mm)
Recommended working pressure: 0.7 BAR
Water flow rate: 0.76 – 1.26 L/min per meter
Recommended installation depth (if buried): 15–20 cm
Maximum recommended loop length: 30 meters

Recommended Water Pressure

For best performance the porous soaker hose should operate at low water pressure.

Optimal working pressure

0.5 – 0.7 BAR (7 – 10 PSI)

At this pressure the hose releases water evenly along its entire length, ensuring efficient irrigation directly at the plant roots.

If pressure is too low

If the pressure is below 0.4 BAR, water may start dripping only from the beginning section of the hose, while the rest of the hose receives insufficient flow.

If pressure is too high

If the pressure exceeds 1 BAR, water may escape more rapidly near the end of the hose, which can lead to uneven watering and reduced irrigation efficiency.

Recommended installation tips

• For best results keep the irrigation line under 30 meters per loop
• Use a pressure reducer or tap regulator if necessary
• Lay the hose on level ground or bury it 15–20 cm below soil

Professional tip

For large irrigation systems it is recommended to install a pressure regulator (0.5–0.7 BAR) to maintain consistent water distribution along the entire hose.

Soaker hoses are designed for low-pressure irrigation systems and should not be connected directly to high-pressure water sources without regulation.

Ideal For

• Vegetable gardens
• Flower beds
• Raised beds
• Greenhouses
• Shrubs and hedges
• Landscape irrigation systems

Important Information

This hose is not suitable for drinking water.

Do not use with hot water.

Connectors included only on:

7.5m
15m
22.5m
30m

Longer hoses supplied without connectors:

50m
100m
200m (2 × 100m)

Accessories

Connectors, hose joiners and mounting hooks are available separately in our other listings, allowing you to expand or customise your irrigation system according to your garden layout.