Police logos
and gaps
NYPD Police
#POL30-1
Decal / usable area: 273x80 mm
approx. 53 individual decals
Decal water-soluble
Real screen-printed wet-slide pictures,
best quality and coverage
Setting Solution is recommended
or Solvaset
(also available from us).
about the processing
and increase liability.
Size of the sheet: 273x80 mm
The decals are water soluble
You are only purchasing the decals set -
WITHOUT MODEL CAR
>>><<<
1:18 DECAL
Police logos
and gaps
NYPD Police
#POL30-1
Decal / Usable area: 273x80 mm
The bow has approx. 53
individual insignias.
True silkscreen wet decals,
best quality and coverage
It is recommended setting solution
or Solvaset apply
(also available from us) to enhance
the processing and adhesion..
Size of the sheet: 273x80 mm
The decals are water-soluble
They only buy that decals sentence -
WITHOUT MODEL CAR
>>>>><<<<<
LES 1:18 DECALCOMANIES
Police logos
and gaps
NYPD Police
#POL30-1
Decalcomanie/zone usable: 273x80 mm
L'arc a l'insigne seul
et approx. 53 dans.
Vrai sérigraphique décalcomanies humides,
The best quality and the couverture
It is recommended solution de réglage
or Solvaset appliquer
(also available chez nous)
afin d'améliorer la transformation
et l'adherence.
Grandeur of the arc: env. 273x80mm
Les décalcomanies are hydrosolubles
Vous achetez the décalcomanies
in this sentence,
SANS la VOITURE de MODÈLE,
>>>>><<<<<
This item is not a toy
and not for children
Suitable for under 14 years.
*********
Decal processing:
Cut the decal sheet into several individual pieces.
Soak a section in lukewarm waterfor 5 to 10 seconds.
Place the section on a cloth until the decal rests lightly on the
Backing paper needs to be moved.
Slide your motif from the backing paper to the desired location
and carefully brush over it with a fine brush
to remove air bubbles trapped underneath.
Suck up excess liquid with a piece
Remove the kitchen roll and carefully press the motif.
Allow the decal to dry long enough.
Use on uneven, curved or textured surfaces
warm to hot water to soften the decal.
Paint carefully on very structured or curved surfaces
diluted methyl alcohol or setting solution with a fine brush
on the decal to make it even softer.
If necessary, dilute the alcohol/setting solution with water
to avoid too strong a reaction to the decal.
It is possible to cover the model with clear varnish if necessary
after the decals have been applied.
It is recommended to test the clear coat for compatibility
to prevent unwanted changes to the decal.
Apply the clear coat in thin layers first,
finally the last layer thicker,
to achieve a beautiful shine.
###
Production of the decals
Production of the wet slide pictures using the screen printing process,which has particularly good color coverage
compared to offset and digital printing.
Of course in perfect quality and a perfect fit.
The decals are each overprinted with a transparent varnish,
so that you don't have to cut out the individual motifs precisely.
The overprinting is only in the 0.1 mm range.
Here too, the templates for printing are created with Corel Draw.
####