Rear Brake Rotors and Pads Kit for Nissan Qashqai 2017-2019 X-Trail 2005-2006
Application:
| Make&Model | Year | Note |
|---|---|---|
| For Infiniti G35 | 2003-2004 | Rear 11.49 Inch Rotor Diameter; 5 Stud; Rear Single Piston Caliper; Manual Parking Brake |
| For Infiniti G35 | 2005 | All Wheel Drive; Rear 11.49 Inch Rotor Diameter; 5 Stud; Manual Parking Brake |
| For Nissan 350Z | 2003-2005 | Rear 11.49 Inch Rotor Diameter; 5 Stud; Rear Single Piston Caliper; Manual Parking Brake |
| For Nissan LEAF | 2011-2021 | Rear 11.49 Inch Rotor Diameter; 5 Stud; Manual Parking Brake |
| For Nissan Qashqai | 2017-2018 | Rear 11.49 Inch Rotor Diameter; 5 Stud; Manual Parking Brake |
| For Nissan Qashqai | 2019 | S, SV; Rear 11.49 Inch Rotor Diameter; 5 Stud; Manual Parking Brake |
| For Nissan Rogue | 2014-2018 | Rear 11.49 Inch Rotor Diameter; 5 Stud; Manual Parking Brake |
| For Nissan Rogue | 2019 | S, SL Hybrid, SV, SV Hybrid; 2.0L, 2.5L; Rear 11.49 Inch Rotor Diameter; 5 Stud; Manual Parking Brake |
| For Nissan Rogue | 2020 | Rear 11.49 Inch Rotor Diameter; 5 Stud; Manual Parking Brake |
| For Nissan Rogue Sport | 2017-2018 | Rear 11.49 Inch Rotor Diameter; 5 Stud; Manual Parking Brake |
| For Nissan Rogue Sport | 2019 | S, SV; Rear 11.49 Inch Rotor Diameter; 5 Stud; Manual Parking Brake |
| For Nissan Rogue Sport | 2020 | Rear 11.49 Inch Rotor Diameter; 5 Stud; Manual Parking Brake |
| For Nissan X-Trail | 2005-2006 | Rear 11.49 Inch Rotor Diameter; 5 Stud; Manual Parking Brake |
OE/Part number:
Rear Brake Disc:31349,S-31349,S31349
Rear Brake Pads:D905,905,P-905,P905
Specification:
Condition: New
Placement on Vehicle: Rear, Left, Right
Instruction Included:Yes
Produced under an IATF 16949 quality management system
✔ Tested in accordance with relevant performance and durability requirements
✔ Strict quality inspection for dimensional accuracy and material consistency
Product size:
- Brake Rotors
| Rear Dirver & Passenger Side | |
|---|---|
| Material | G3000 |
| Solid Or Vented Type Rotor | Vented |
| Rust Resistant Coating | Anti-rust oil treatment |
| Directional or Non-Directional Brake Surface | Directional |
| ABS Tone Ring Included | No |
| Bearings Included | No |
| Mounting Bolt Hole Quantity | 5+1 |
| Mounting Bolt Hole Circle Diameter(mm) | 114.3 |
| Outside Diameter(mm) | 292mm (11.50 in) |
| Overall Height(mm) | 62 |
| Nominal Thickness(mm) | 16 |
- Brake Pads
| Rear Dirver & Passenger Side | |
|---|---|
| Fitment | Direct Replacement |
| Backing Material | Steel |
| Pad Material | NAO Ceramic |
| Pad Shims Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting bolt | No |
| Lubricant Included | Yes |
| Pad Wear Sensor Included | Yes |
| Pad Wear Sensor Type | Mechanical Sear Sensor |
| Inner Pad Width(mm) | 105.54 (±0.3) |
| Inner Pad Height(mm) | 37.9 (±0.3) |
| Inner Pad Thickness(mm) | 13.6 (-0.5) |
| Outer Pad Width(mm) | 105.54 (±0.3) |
| Outer Pad Height(mm) | 37.9 (±0.3) |
| Outer Pad Thickness(mm) | 13.6 (-0.5) |
Note on Initial Brake Noise
- Common Causes:
① New pads and rotors not fully bedded, causing uneven contact.
② Before anti-rust coating on rotors wearing off, may cause slight hissing.
③ Thin surface rust forms on rotors overnight in humid conditions, resulting in a squeak during initial braking.
- Resolution:
Noise will naturally disappear after 200–500 miles of normal driving. Avoid hard braking during this period.
Package included:
2x Rear Drilled and Slotted Brake Rotors
4x Rear Brake Pads w/Hardware
Other items you might also like