-
FEATURES:
1. A3 steel housing, makes small size, light weight, beautiful appearance and low working vibration.
2.flange connection ensures good strength, easy installation and maintenance.
3.enhanced fiberglass turbine blades with optimized aerodynamic shape design and structural design, can lower start wind speed and higher wind energy utilization.
The blade is coated by gel coat resin and painted to resist corrosion by air and water.
4. the automatic-yaw tail rudder empowers this horizontal swing-tail wind turbine (the tail automatically swings in high wind and automatically return in safe wind)a higher anti-typhoon capacity.
5. permanent magnet external rotor design,reduced the resistance torque and very good heat dissipation performance compared to inner rotor generators.
6. 42NSH magnetic steel piece has stronger magnetism and higher temperature resistance.
7. F-class enameled wire could stand 150 degrees temperature, coil operation safety is ensured.
8. the body shell is dacromet coated and twice anti-corrosion painted, to ensure rust free after a long time operationModel: FK5000
Rated power: 5000w
Rated voltage: 48V /96V /120V 220V /240V
Blade length: 160 cm
Top net weight: 52kg
Wind turbine diameter: 3.2 m
Rated wind speed: 10m/s
Start wind speed: 2.2m/s
Survival wind speed: 40m/s
Generator: 3-phase permanent magnet synchronous generator
Lifespan: More than 20 years
Warehouse: HRB or for your order
Blade Material: Fiberglass
Shell Material: Aluminum Alloy
Permanent Magnet Material: Rare Earth NdFeB
Control system: electromagnet
Lubrication: grease
Working temperature: -40 to 80
Packaged included:
1 x Wind Turbine Generator
3 x rotor blades
1 * User Manual
Including mounting accessories
-
HIGH-QUALITY BLADES
The blade material is synthetically injection molded with high-strength FRP material. At the same time, the fashionable spiral blade is also designed with aerodynamics to make the rotor run smoothly, reliably and quietly.Coreless PMG provides lower start torque/wind speed and longer service life.Design service life 10~15 years.
Maximum RPM protection. No higher than 300RPM, regardless of the wind speed.
POWERFUL PERFORMANCE
Designed with three-phase AC PMG, it boasts low torque, high-power tracking intelligent microprocessor that can effectively regulating the current and voltage. It obviously increases wind energy utilization and annual power generation.
COMPACT & FIXED
With dual bearings, the fan movement is more stable. Low vibration and low noise. In addition, with its compact shape, it has the lowest starting wind speed and a larger windward area, enabling it to generate electricity at lower wind speeds.
EASY INSTALLATION
All things you need for installation are included. You can also get extra installation tool (two wrenches). Humanized and convenient flange design, easy to install and maintain.
MULTIFUNCTIONAL USE
It is ideally suited for boats, gazebos, cabins or mobile homes, as well as for green windmills, home, corporate and industrial energy supplem
-
On grid system diagram
ADVANTAGES OF GRID-TIED SYSTEMS
1. SAVE MORE MONEY WITH NET METERING
A grid-connection will allow you to save more money with wind generator through better efficiency rates, net metering, plus lower equipment and installation costs:
).Batteries, and other stand-alone equipment, are required for a fully functional off-grid wind system and add to costs as well as maintenance. Grid-tied wind systems are therefore generally cheaper and simpler to install.
).Your wind turbine generator will often generate more electricity than what you are capable of consuming. With net metering, homeowners can put this excess electricity onto the utility grid instead of storing it themselves with batteries.
).Net metering (or feed-in tariff schemes in some countries) play an important role in how wind power is incentivized. Without it,residential wind systems would be much less feasible from a financial point of view.
).Many utility companies are committed to buying electricity from homeowners at the same rate as they sell it themselves.
2. THE UTILITY GRID IS A VIRTUAL BATTERY
).Electricity has to be spent in real time. However, it can be temporarily stored as other forms of energy (e.g. chemical energy in batteries). Energy storage typically comes with significant losses.
).The electric power grid is in many ways also a battery, without the need for maintenance or replacements, and with much better efficiency rates. In other words, more electricity (and more money) goes to waste with conventional battery systems.
).According to EIA data[1], national, annual electricity transmission and distribution losses average about 7% of the electricity that is transmitted in the United States. Lead-acid batteries, which are commonly used with solar panels, are only 80-90% efficient at storing energy, and their performance degrades with time.
).Additional perks of being grid-tied include access to backup power from the utility grid (in case your solar system stop generating electricity for one reason or another). At the same time you help to mitigate the utility company`s peak load. As a result, the efficiency of our electrical system as a whole goes up.
Off grid system diagram
ADVANTAGES OF OFF-GRID SOLAR SYSTEMS
1. NO ACCESS TO THE UTILITY GRID
Off-grid solar systems can be cheaper than extending power lines in certain remote areas.
Consider off-gird if you’re more than 100 yards from the grid. The costs of overhead transmission lines range from $174,000 per mile (for rural construction) to $11,000,000 per mile (for urban construction).
2. BECOME ENERGY SELF-SUFFICIENT
Living off the grid and being self-sufficient feels good. For some people, this feeling is worth more than saving money.
Energy self-sufficiency is also a form of security. Power failures on the utility grid do not affect off-grid wind systems.
On the flip side, batteries can only store a certain amount of energy, and during cloudy times, being connected to the grid is actually where the security is. You should install a backup generator to be prepared for these kinds of situations.Off grid system diagram
1. NO ACCESS TO THE UTILITY GRID
Off-grid solar systems can be cheaper than extending power lines in certain remote areas.
Consider off-gird if you’re more than 100 yards from the grid. The costs of overhead transmission lines range from $174,000 per mile (for rural construction) to $11,000,000 per mile (for urban construction).
2. BECOME ENERGY SELF-SUFFICIENT
Living off the grid and being self-sufficient feels good. For some people, this feeling is worth more than saving money.
Energy self-sufficiency is also a form of security. Power failures on the utility grid do not affect off-grid wind systems.
On the flip side, batteries can only store a certain amount of energy, and during cloudy times, being connected to the grid is actually where the security is. You should install a backup generator to be prepared for these kinds of situations.Please according to our following requirements:
1. The installation height of the wind turbine shall be at least 10m, and there shall be no trees or buildings around. Of course, the higher the mast, the better the wind turbine can utilize wind energy and achieve the best results.
2. If the wind speed is only 3-5 meters/s, the wind turbine can only maintain rotation, and the power generation effect may not achieve the expected effect. The actual local wind speed needs to reach at least 10 meters/s to achieve the expected effect. The higher the wind speed, the better the wind power generation effect.
3. The system voltage of storage battery, wind turbine and charging controller must be the same. And please check the state of the battery. The remaining power of the battery should be in the range of 10% - 90%. It cannot be a state of fullness.
4. Connection method: (1) First connect the charging controller with the battery. The black wire is the negative pole, and the red wire is the positive pole. It cannot be reversed. (2) then the other three blue cables of the charging controller can be connected with the three cables from the wind turbine.