eBay

Rotary Vane Brass Pump Series 4- 240GPH (725LPH), EPDM/Nitrile, Standard-Non External adjust

Consistent flow rate across variable pressures
Self-priming (water) and maintenance-free with low vibration and pulsation characteristics
Internal Relief Valve Standard-Non External adjust configuration
Brass Housing Material
NPT 1/2" Inlet and Outlet Connections
Constructed with EPDM/Nitrile Elastomers
Flowrate of 240GPH (725LPH)*
Fluid Operating Temperature of between -4°F to 160°F (-20°C to 71°C)
Maximum Mechanical Horsepower required 0.86hp (641W)¹

* GPH rating at 1725RPM/60Hz and LPH rating at 1450RPM/50Hz
¹ Mechanical Horsepower requirement based on pump tested with water at room temperature and maximum operating pressure 250psi (17.5BAR)

Technical Information

Body Material:	Brass
Port Size:	1/2" NPT
Mounting Type:	Clamp-On
Drive Configuration:	Single Flat
Flow Rate:	240 GPH / 725 LPH
Elastomer:	EPDM / NBR
Seal Type:	Non Balances Ceramic / Carbon
Rotation:	Clockwise
Internal Component Material:	Carbon
Valve Type:	Solid-Utem
Valve Configuration:	Standard Non-External Adjust

Operating Range

Maximum Mechanical Power Requirement:	0.86 hp (641 W)
Maximum Operating Pressure:	150 psi
Relief Valve Set Pressure Range:	151 - 250 psi (10 to 17.5 bar)
Max Static Pressure:	100 psi
Operation Fluid Temperature Range:	-4°F (-20°C) - 160°F (71°C)
Max Fluid Viscosity:	100 cP
Max Sound Level:	60dB(a)
Max Discharge Pressure:	250 PSI
Min/Max Speed:	1000 - 2400 RPM
Dry Suction Lift:	3.3 ft
Wet Suction Lift:	6.6 ft
Fluid Acidity:	6 pH
Maximum Total Dissolved Solids (TDS):	5000 ppm