Product Details
- Consistent flow rate across variable pressures
- Self-priming (water) and maintenance-free with low vibration and pulsation characteristics
- Internal Relief Valve Standard-Non External adjust configuration
- Stainless Steel Housing Material
- NPT 3/8" Inlet and Outlet Connections
- Constructed with EPDM/Nitrile Elastomers
- Flowrate of 70GPH (210LPH)*
- Fluid Operating Temperature of between -4°F to 160°F (-20°C to 71°C)
- Maximum Mechanical Horsepower required 0.37hp (276W)
* GPH rating at 1725 RPM/60Hz and LPH rating at 1450 RPM/50Hz¹ Mechanical Horsepower requirement based on pump tested with water at room temperature and maximum operating pressure 250psi (17.5BAR)
Technical Information
Body Material
Stainless Steel
Port Size
3/8" NPT
Mount
Clamp-On
Drive Configuration
Double Flat
Flow Rate
70 GPH / 210 LPH
Elastomer
EPDM/Nitrile
Seal Type
Non Balances Ceramic/Carbon
Rotation
Clockwise
Internal Component Material
Carbon
Valve Type
Solid- Ultem
Valve Configuration
Standard- Non External adjust
Agency Approvals
NSF STD. 169 Listed (1.5% Max Lead)
70 GPH / 210 LPH
EPDM/Nitrile
Non Balances Ceramic/Carbon
Standard- Non External adjust
NSF STD. 169 Listed (1.5% Max Lead)
Operating Range
Maximum Mechanical Power Requirement
0.37hp (276W)
Maximum System Pressure
150psi
Relief Valve Set Pressure Range
151 to 250psi (10 to 17.5 BAR)
Max Static Pressure
100 psi
Operation Fluid Temperature Range
-4°F (-20°C) - 160°F (71°C)
Max Fluid Viscosity
100 cP
Max Sound Level
60dB(a)
Max Discharge Pressure
250 psi
Min/Max Speed
1000 - 2400 RPM
Dry Suction Lift
3.3 ft
Wet Suction Lift
6.6 ft
Fluid Acidity
2 pH
![]()
150psi
151 to 250psi (10 to 17.5 BAR)