• Fitment
  • Fits 2006-2008 Dodge Ram 1500 4WD Only  
  • **TRX Models Will NOT Fit 3" or 3.5" Front Spacer
  • **Does NOT Fit Mega Cab Models / Rebel Models / Warlock Models
  •  
  • Item Description
  • Placement on Vehicle: Front + Rear Front Lift Height: 3 inch Rear Lift Height: 1 inch Front Spacer Thickness: 1.89 inch/ 48 mm Rear Block Thickness: 1 inch/ 25 mm U-Bolt Size: 9/16"-18 Round - Long 10.63 inch/ 270 mm Material: Aluminum+Steel Color: Black
  •  
  • Precautions for Installing a Leveling Lift Kit
  • Pre-Installation
  • 3" Front & 1" Rear Leveling Lift Kit For Dodge Ram 1500 4WD 2006-2008

    Fitment

    Fits 2006-2008 Dodge Ram 1500 4WD Only
     

    **TRX Models Will NOT Fit 3" or 3.5" Front Spacer

    **Does NOT Fit Mega Cab Models / Rebel Models / Warlock Models

     

    Item Description

    Placement on Vehicle: Front + Rear
    Front Lift Height: 3 inch
    Rear Lift Height: 1 inch
    Front Spacer Thickness: 1.89 inch/ 48 mm
    Rear Block Thickness: 1 inch/ 25 mm
    U-Bolt Size: 9/16"-18 Round - Long 10.63 inch/ 270 mm
    Material: Aluminum+Steel
    Color: Black

     

    Precautions for Installing a Leveling Lift Kit

    Pre-Installation

    • Compatibility Check:Verify the kit is fully compatible with your vehicle's year, model, and specific configuration (e.g., drivetrain, factory suspension package).
    • Review Instructions:Thoroughly read and understand the manufacturer's complete instructions before starting
    • Gather Tools:Gather the correct professional tools, including: hydraulic jack, jack stands (at least two), torque wrench, socket set, spring compressors (for coil springs), pry bars
    •  Safety Equipment:Always wear safety glasses and gloves

    During Installation

    • Secure Vehicle:Operate on a flat, solid surface. Engage the parking brake and chock the wheels not being lifted. Never work under a vehicle supported only by a jack! Always use jack stands on the vehicle's frame or solid lift points
    • Spring Handling (EXTREME DANGER):When disassembling struts, you MUST use professional spring compressors to safely relieve spring tension. Never attempt this without compressors
    • Protect Surrounding Components:Be careful to protect brake lines, ABS sensor wires, and other linkages from damage during disassembly.

    Post-Installation

    • Wheel Alignment:You MUST get a professional wheel alignment immediately after installation! Failure to do so will cause abnormal tire wear, pulling, and dangerous handling.
    • Inspection and Re-torque:After installation, double-check that all components are installed correctly. After driving 50-100 km, re-torque all critical fasteners.
    • Test Drive: Perform an initial test drive at low speeds in a safe area. Test the brakes and listen for any unusual noises

    Item Specifics
    Brand everpartstorecs
    Manufacturer Part Number 13366973
    Manufacturer Warranty 1 Year
    Part Type Suspension Lift Kit
    Interchange Part Number For 2006-2008 Dodge Ram 1500 4WD Only
    Lift Height 3" Front & 1" Rear
    Fitment Type Direct Replacement
    Color Black
    Surface Finish Corrosion / Oxidation Resistant
    Placement on Vehicle Left, Right, Front, Rear
    Material Aluminum, Steel
    Quantity 2X Front Strut Spacers, 2X Rear Blocks, 4X Ubolts
    Spacers Specs 3 inch Lift Height / 1.89 inch (48mm) Thickness - Aluminum
    Blocks Specs 5" Long x 2.36" Wide - Aluminum
    U Bolt Specs 9/16"-18 Round 10.63" Length - Steel
    Included Hardware Mounting Hardware
    Drive Type 4WD
    Fitment Note Does Not Fit Mega Cab / Rebel Models / Warlock Models
    Note Lift amount does NOT equal spacer thickness
    Adjustable No

    Shipping

    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    Payment

    Any payments accepted by ebay also can be accepted.

    Service

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    Note

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.

    3" Front & 1" Rear Leveling Lift Kit For Dodge Ram 1500 4WD 2006-2008

    Fitment

    Fits 2006-2008 Dodge Ram 1500 4WD Only
     

    **TRX Models Will NOT Fit 3" or 3.5" Front Spacer

    **Does NOT Fit Mega Cab Models / Rebel Models / Warlock Models

     

    Item Description

    Placement on Vehicle: Front + Rear
    Front Lift Height: 3 inch
    Rear Lift Height: 1 inch
    Front Spacer Thickness: 1.89 inch/ 48 mm
    Rear Block Thickness: 1 inch/ 25 mm
    U-Bolt Size: 9/16"-18 Round - Long 10.63 inch/ 270 mm
    Material: Aluminum+Steel
    Color: Black

     

    Precautions for Installing a Leveling Lift Kit

    Pre-Installation

    • Compatibility Check:Verify the kit is fully compatible with your vehicle's year, model, and specific configuration (e.g., drivetrain, factory suspension package).
    • Review Instructions:Thoroughly read and understand the manufacturer's complete instructions before starting
    • Gather Tools:Gather the correct professional tools, including: hydraulic jack, jack stands (at least two), torque wrench, socket set, spring compressors (for coil springs), pry bars
    •  Safety Equipment:Always wear safety glasses and gloves

    During Installation

    • Secure Vehicle:Operate on a flat, solid surface. Engage the parking brake and chock the wheels not being lifted. Never work under a vehicle supported only by a jack! Always use jack stands on the vehicle's frame or solid lift points
    • Spring Handling (EXTREME DANGER):When disassembling struts, you MUST use professional spring compressors to safely relieve spring tension. Never attempt this without compressors
    • Protect Surrounding Components:Be careful to protect brake lines, ABS sensor wires, and other linkages from damage during disassembly.

    Post-Installation

    • Wheel Alignment:You MUST get a professional wheel alignment immediately after installation! Failure to do so will cause abnormal tire wear, pulling, and dangerous handling.
    • Inspection and Re-torque:After installation, double-check that all components are installed correctly. After driving 50-100 km, re-torque all critical fasteners.
    • Test Drive: Perform an initial test drive at low speeds in a safe area. Test the brakes and listen for any unusual noises


    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    Any payments accepted by ebay also can be accepted.

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.