THE PART NUMBER HAS CHANGED MANY TIMES THRU THE YEARS. THERE ARE NO JETS INSIDE THE FLOAT BOWL THEY WERE REMOVED YEARS AGO. SO PLEASE LOOK AT THE PICTURES AND READ ALL OF THE DETAILS. THIS WAS REMOVED OFF A BRAND NEW CARBURETOR MANY YEARS AGO I NEEDED THE JETS OUT OF IT. THIS IS MUCH BETTER THAN THE NEW REPLACEMENT CARBURETOR FLOAT BOWLS WHICH WERE MADE OF PLASTIC OR HAS THE PLASTIC HOSE BARB NIPPLE FOR THE FUEL HOSE INLET. MANY DIFFERENT APPLICATIONS ALL V-4 AND V-6 OUTBOARD MOTORS 85 90 100 110 112 115 140 150 175 185 200 235 HP THAT HAVE ALUMINUM BODY OR PLASTIC BOWLS OR ALUMINUM BODY WITH THE PLASTIC FUEL INLET NIPPLE .THIS BOWL IS BETTER THAN THE BOWLS THAT HAVE THE PLASTIC HOSE BARB ON THE FUEL INLET SIDE OR ALL OF PLASTIC BOWLS BECAUSE  THIS HAS THE BRASS FITTING. IF YOU HAVE A PLASTIC BOWL THIS WILL REPLACE IT BUT YOU HAVE TO PURCHASE DIFFERENT INTERMEDIATE JET TO THE 8/32 THREAD SIZE THE SAME SIZE ORFICE .THE PLASTIC BOWL INTERMEDIATE JET WAS INSIDE THE FLOAT BOWL THAT HAS A 1/4 20 THREAD JETS  ONLY ON THE HIGH SPEED JETS HAVE THE 1/4 20 THREADS  THAT WILL NOT WORK ON THIS FLOAT BOWL. THIS WILL NOT CRACK LIKE THE PLASTIC ONES DO. SO PLEASE MAKE SURE THIS IS THE CORRECT PART FOR YOUR APPLICATION.THERE ARE MANY DIFFERENT CARBURETOR BOWLS FOR THESE DIFFERENT HP CROSS FLOW V-4 V-6  MOTORS FROM 1979 THRU 1990'S ERA .THIS STYLE FLOAT BOWL THE HIGH AND INTERMEDIATE IN THE BOTTOM OF THE FLOAT BOWL. WILL SHIP USPS MAIL