• Fitment
  • For Buick Lesabre 2000-2005 Fwd For Buick Lucerne 2006-2011 Fwd For Buick Park Avenue 1997-2005 Fwd For Buick Riviera 1997-1999 Fwd For Cadillac Dts 2006-2011 Fwd For Cadillac Eldorado 1997-2002 Fwd For Cadillac Seville 1997-2004 Fwd For Oldsmobile Aurora 1997-2003 Fwd For Pontiac Bonneville 2000-2005 Fwd
  •  
  • Package Include
  • (2) Front Wheel Hub Bearing - 513121 (2) Rear Wheel Hub Bearing - 512003
  •  
  • Hub Unit Installation Guide
  • 4Pcs Front Rear Wheel Hub Bearings FWD For Buick Lucerne Cadillac DTS 2006-2011

    Fitment

    For Buick Lesabre 2000-2005 Fwd
    For Buick Lucerne 2006-2011 Fwd
    For Buick Park Avenue 1997-2005 Fwd
    For Buick Riviera 1997-1999 Fwd
    For Cadillac Dts 2006-2011 Fwd
    For Cadillac Eldorado 1997-2002 Fwd
    For Cadillac Seville 1997-2004 Fwd
    For Oldsmobile Aurora 1997-2003 Fwd
    For Pontiac Bonneville 2000-2005 Fwd

     

    Package Include

    (2) Front Wheel Hub Bearing - 513121
    (2) Rear Wheel Hub Bearing - 512003

     

    Hub Unit Installation Guide

    • Step 1: Safety & Disassembly
    1. Engage parking brake and securely support vehicle with jack stands
    2. Remove wheel, unbolt brake caliper (hang it up with wire, don't stretch the hose), and remove brake rotor

    3. Remove axle nut and use a puller to remove the old hub unit

    ​

    • Step 2: Cleaning & Preparation
    1. Thoroughly clean the hub mounting surface on the steering knuckle, ensure it's free of rust and debris

    2. Inspect the new hub unit, avoid touching the magnetic ABS sensor ring with bare hands

    ​

    • Step 3: Installation & Tightening
    1. Position the new hub unit straight into place

    2. Use a proper tool (e.g., press or socket) to press/guide it evenly into position

    3. You must use a torque wrench to tighten all mounting bolts and the new axle nut to the specified torque

    ​

    • Step 4: Reassembly & Inspection

    1. Reinstall the brake rotor, caliper, and wheel

    2. Lower the vehicle, then lift the wheel off the ground with the car's jack to check for smooth rotation

    3. Perform a test drive to ensure no abnormal noise and the ABS warning light is off

     

    Critical Warnings

    • Mounting surface must be perfectly clean, no rust or dirt
    • Never strike the new hub unit directly with a hammer! This will instantly damage the bearing and ABS function
    • Always use a new axle nut! A used nut can loosen and cause a serious failure
    • Do not touch the magnetic ABS ring

    Item Specifics
    Brand everpartstorecs
    Manufacturer Part Number 13445988
    Manufacturer Warranty 1 Year
    Type Wheel Hub & Bearing Assembly
    OE/OEM Part Number 513121, 512003
    Drive Type FWD
    Interchange Part Number BR930074, 7470555, WE60699, BR930548K, WE60702, 7470568, 7470567
    ABS Sensor Has ABS with tegral Sensor
    Bolt Pattern 5 x 4.53 in (5 x 115 mm)
    Bolt Circle Diameter 4.53 in. / 115 mm
    Brake Pilot Diameter 2.78 in. / 70.6 mm
    Flange Diameter 5.73 in. / 145.5 mm (Front); 5.93 in. / 150.5 mm (Rear)
    Flange Offset 1.65 in. / 42 mm (Front); 2.56 in. / 65.14 mm (Rear)
    Flange Shape Rectangular/ Triangle
    Placement on Vehicle Left, Right, Front, Rear
    Material Steel
    Quantity 4
    Wheel Pilot Diameter 2.76 in. / 70.1 mm
    Wheel Stud Quantity 5
    Wheel Stud Size M12x1.5
    Wheel Studs Included Yes
    Front Flange Bolt Hole Quantity 3
    Rear Flange Bolt Hole Quantity 4
    Flange Bolts Included No

    Shipping

    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    Payment

    Any payments accepted by ebay also can be accepted.

    Service

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    Note

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.

    4Pcs Front Rear Wheel Hub Bearings FWD For Buick Lucerne Cadillac DTS 2006-2011

    Fitment

    For Buick Lesabre 2000-2005 Fwd
    For Buick Lucerne 2006-2011 Fwd
    For Buick Park Avenue 1997-2005 Fwd
    For Buick Riviera 1997-1999 Fwd
    For Cadillac Dts 2006-2011 Fwd
    For Cadillac Eldorado 1997-2002 Fwd
    For Cadillac Seville 1997-2004 Fwd
    For Oldsmobile Aurora 1997-2003 Fwd
    For Pontiac Bonneville 2000-2005 Fwd

     

    Package Include

    (2) Front Wheel Hub Bearing - 513121
    (2) Rear Wheel Hub Bearing - 512003

     

    Hub Unit Installation Guide

    • Step 1: Safety & Disassembly
    1. Engage parking brake and securely support vehicle with jack stands
    2. Remove wheel, unbolt brake caliper (hang it up with wire, don't stretch the hose), and remove brake rotor

    3. Remove axle nut and use a puller to remove the old hub unit

    ​

    • Step 2: Cleaning & Preparation
    1. Thoroughly clean the hub mounting surface on the steering knuckle, ensure it's free of rust and debris

    2. Inspect the new hub unit, avoid touching the magnetic ABS sensor ring with bare hands

    ​

    • Step 3: Installation & Tightening
    1. Position the new hub unit straight into place

    2. Use a proper tool (e.g., press or socket) to press/guide it evenly into position

    3. You must use a torque wrench to tighten all mounting bolts and the new axle nut to the specified torque

    ​

    • Step 4: Reassembly & Inspection

    1. Reinstall the brake rotor, caliper, and wheel

    2. Lower the vehicle, then lift the wheel off the ground with the car's jack to check for smooth rotation

    3. Perform a test drive to ensure no abnormal noise and the ABS warning light is off

     

    Critical Warnings

    • Mounting surface must be perfectly clean, no rust or dirt
    • Never strike the new hub unit directly with a hammer! This will instantly damage the bearing and ABS function
    • Always use a new axle nut! A used nut can loosen and cause a serious failure
    • Do not touch the magnetic ABS ring


    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    Any payments accepted by ebay also can be accepted.

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.