eBay

1pcs Turbocharger .63 A/R T3 Flange 5 Bolt Exhaust TX-50E-57 200-400 HP+

Product Introduction

Compressor Inlet: 3.00"

Compressor Outlet: 2.00"

Compressor Cover: TX-50E

Compressor Wheel Diameter: 53mm / 75mm

Turbine Wheel Diameter: 57mm / 65mm

Exhaust Trim: .63 A/R

Turbine Flange Type: T3

Downpipe Flange Type: 5-Bolt Standard

Cooling Type: Oil Cooled

Horsepower Rating: Up to 400HP

Recommended Oil Restrictor Size: 0.065"

Fitment

0.63AR T3 Flange / 5-Bolt Exhaust 400HP TX-50E-57

Installing a Turbocharger
Installing a turbocharger is a complex process involving multiple steps and technical details. Here are the basic steps and precautions for installing a turbocharger:

Preparation: Before beginning installation, ensure you have all necessary tools and accessories, including the turbocharger kit, mounting bolts, washers, and lubricant.
Installing the turbocharger kit: Place the turbocharger kit near the engine and secure it in place with the mounting bolts and washers. Ensure all connections are secure and there are no loose parts
Connecting the intake and exhaust manifolds: Connect the intake manifold to the turbocharger's intake port and the exhaust manifold to the turbocharger's exhaust port. Ensure all connections are tight and there are no leaks.
Installing the oil system: The turbocharger requires oil to maintain proper operation. When installing the oil system, ensure the oil lines are connected correctly and that the oil pump can provide sufficient oil pressure and flow.
Electrical connections: If the turbocharger is equipped with an electronic control system, appropriate electrical connections are required. This may include connecting sensors, actuators, and control modules.
Commissioning and Testing: After completing the above steps, commissioning and testing are performed to ensure the turbocharger is functioning properly. This may include checking parameters such as turbocharger speed, pressure, and temperature, as well as monitoring for unusual noise or vibration.

Note

Please note that these are general guidelines only; the specific installation process may vary depending on the vehicle model and turbocharger model. It is recommended to consult a qualified installation specialist.

Item Specifics
Brand	everpartstorecs
Manufacturer Part Number	13353990
Manufacturer Warranty	1 Year
Type	Turbocharger
OE/OEM Part Number	TX-50E-57
Features	Individual
Universal Fitment	Yes
Performance Part	Yes
Custom Bundle	No
Fitment Type	Direct Replacement
Engine Type	Turbocharged
Color	Silver
Finish	Matte
Placement on Vehicle	Front
Package Contents	As the picture shows
Items Included	Mounting Hardware
Vintage Part	No
Notes	Please Add Engine Oil Before Use

Shipping

1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

tell us the new address within 12 hours after payment

(no delivery to remote areas).

4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

if there are any problems, contact us immediately please.

Payment

Any payments accepted by ebay also can be accepted.

Service

1. Products can be returned for no reason within 30 days of receipt

(products to be returned must be in a resalable condition, if they have been used we will not accept the return).

2. If the product does not match the description on the product page, we will exchange or refund the product for free

within 30 days.

3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

Note

If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.

Shop Category

Air Diesel Heater

Blower Resistor

Suspension Kits

Thermostat Housing

ABS Wheel Speed Sensor

3Rd Brake Light

Mass air flow sensor

Catalytic Converter

Window Regulator

Headlight Assembly

Fuel Pump Assembly

Leveling Lift Kits

Wheel Hub Bearing Knuckle

Windshield Wiper Motor

Head Gasket Set

4 Pcs Wheel Hub Bearing

Wheel Hub Bearing

Tire Anti-skid Chain

1pcs Turbocharger .63 A/R T3 Flange 5 Bolt Exhaust TX-50E-57 200-400 HP+

Product Introduction

Compressor Inlet: 3.00"

Compressor Outlet: 2.00"

Compressor Cover: TX-50E

Compressor Wheel Diameter: 53mm / 75mm

Turbine Wheel Diameter: 57mm / 65mm

Exhaust Trim: .63 A/R

Turbine Flange Type: T3

Downpipe Flange Type: 5-Bolt Standard

Cooling Type: Oil Cooled

Horsepower Rating: Up to 400HP

Recommended Oil Restrictor Size: 0.065"

Fitment

0.63AR T3 Flange / 5-Bolt Exhaust 400HP TX-50E-57

Installing a Turbocharger
Installing a turbocharger is a complex process involving multiple steps and technical details. Here are the basic steps and precautions for installing a turbocharger:

Preparation: Before beginning installation, ensure you have all necessary tools and accessories, including the turbocharger kit, mounting bolts, washers, and lubricant.
Installing the turbocharger kit: Place the turbocharger kit near the engine and secure it in place with the mounting bolts and washers. Ensure all connections are secure and there are no loose parts
Connecting the intake and exhaust manifolds: Connect the intake manifold to the turbocharger's intake port and the exhaust manifold to the turbocharger's exhaust port. Ensure all connections are tight and there are no leaks.
Installing the oil system: The turbocharger requires oil to maintain proper operation. When installing the oil system, ensure the oil lines are connected correctly and that the oil pump can provide sufficient oil pressure and flow.
Electrical connections: If the turbocharger is equipped with an electronic control system, appropriate electrical connections are required. This may include connecting sensors, actuators, and control modules.
Commissioning and Testing: After completing the above steps, commissioning and testing are performed to ensure the turbocharger is functioning properly. This may include checking parameters such as turbocharger speed, pressure, and temperature, as well as monitoring for unusual noise or vibration.

Note

Please note that these are general guidelines only; the specific installation process may vary depending on the vehicle model and turbocharger model. It is recommended to consult a qualified installation specialist.

ShippingPaymentServiceNote

1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

tell us the new address within 12 hours after payment

(no delivery to remote areas).

4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

if there are any problems, contact us immediately please.

Any payments accepted by ebay also can be accepted.

1. Products can be returned for no reason within 30 days of receipt

(products to be returned must be in a resalable condition, if they have been used we will not accept the return).

2. If the product does not match the description on the product page, we will exchange or refund the product for free

within 30 days.

3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.