Features:
This item is just a converter, not a mobile power supply.
Use: Common high-power DC power supplies such as laptop DC power supply, PD power supply, monitor power supply, etc. PD2.0 protocol power bank charger. Switch to full dual-port 140W fast charging protocol.
Super heat dissipation, aluminum alloy shell!
Size: 50*26*17mm, ultra-high power density 140W!
Input voltage 10-28V. Support DC5525 and PD2.0/3.0 input. PD automatically activates the maximum voltage within 20V
USB A port output + C port. The output voltage is lower than the input voltage. For example, the output voltage of 20V5A100W must have at least 20V5A input.
It is tested to support most red factory 50w or higher power fast charging (must be the A to C fast charging cable)
USBC port and higher protocols also support PD2.0.PD3.0, QC4+, Lianxiang 140W
PD output is protected.
Dual-port output, only 1 fast charge, 2 ports combined only 5V slow charge, it is recommended to use only 1 of them.
Large volume and large capacity solid capacitor 8*8! Never shrink to a small 6*6 entity!
Imported 60V power tube! 5*6mm large volume fully imported power tube! Never shrink to a small 3*3 power tube!
Double-sided motherboard assembly, maximize the use of every inch of space! No manual welding required! Single-sided assembly will never shrink!
Listen to standard PD! Support PD input! Never use junk PD materials to copy the standard!
KRCONN certified C port, no exposed contacts on the side, greatly reducing the risk of short circuit burns.
Integrated Type-C port! Higher strength! Never get stuck on the panel to reduce the volume!
Specifications:
Part Name: 140W PD Fast Charging Converter
Material: Aluminum Alloy
Size: 50*26*17mm
Color: Black + Purple
Package Contents:
1*140W PD Fast Charging Converter
Note:
1. The device requests the required power as needed. Not all situations require full power operation. In order to make the laptop run at full power, you can try to charge and run the baking software so that the CPU running the GPU is as fully loaded as possible;
2. After the series detection device is connected, the internal resistance increases, resulting in a large voltage drop. The device cannot obtain higher power. To test the power supply, please try to measure the input power or in a 220V power supply. Avoid excessive voltage drop in the output string meter;
3. To generate 20V gears such as 140W, 100W, etc., at least 20V or higher voltage is required. This module can only step down, so if the input voltage is 19V, the output voltage is only 15V;
4. The input power must be more than 5% greater than the output power. For example, if the actual output is 100W, the input needs to be above 105W; otherwise, frequent power outages may occur.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.
Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.
It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.