• Specifics and features:
  • The UCFL pillow block mounted bearing series has two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts.
  • This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds.
  • This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring.
  • Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads.
  • The bearing is secured to the shaft with set screws to prevent slippage.

    • LABLT 10Pcs 2 Bolt Solid Base UCFL202-10 5/8" Bore Pillow Block Flange Bearing

    Specifics and features:

    The UCFL pillow block mounted bearing series has two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts.

    This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds.

    This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring.

    Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads.

    The bearing is secured to the shaft with set screws to prevent slippage.

    This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.

    If the bearing is crooked for example when you lay it on a flat table, it is not flat.

    Please don't worry. This is our self-alignment feature. These bearing are meant to have some play in them.

    When you mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct their own alignment once they begin to rotate.

    Because if the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen.

    So our self-alignment feature is a way to prevent this from happening.

    Style: 2 Bolts

    Material: Cast Iron

    Bore Size: 5/8 Inch

    Static Load Rating: 12.80 kN/ 2878 lbs

    Dynamic Load Rating: 12.80 kN/ 2878 lbs

    Max RPM: 3800

    Quantity Per order: 10 Pieces

     

    Notes:

    We strongly recommend professional installation.

    If you are unsure whether the product is suitable for your equipment, please contact us promptly before purchasing to confirm.

    Due to the fact that all detailed dimensions of the product are manually measured, please allow for measurement errors.

    Due to lighting issues during photography, the product images in the link may not reflect the actual color of the item.

    Thank you for collecting our store and looking forward to working with you.

     

     

     


    Item Specifics
    Country of Origin United States
    Brand LABLT
    MPN QS400784QR
    Material Cast Iron
    Bore Size 5/8 Inch
    Style 2 Bolts
    Static Load Rating 12.80 kN/ 2878 lbs
    Dynamic Load Rating 12.80 kN/ 2878 lbs
    Max RPM 3800
    Quantity Per order 10 Pieces
    Condition New
    Warranty 1 Year

    Payment

    We accept Paypal,Google Pay,VISA,Master Card,American Express,Discover,eBay Mastercard payment .

    Shipping

    All items will be shipped to buyer's eBay address. Please make sure your address in eBay matches the address you would like us to ship to before payment.

    Easy Return

    If you are unhappy with your purchase for any reason, US buyers can return it to us in an un-used condition in the original packaging within 30 days of purchase and we'll give you a refund or exchange. The refund/Exchange will not include postage/eBay costs. Please note you MUST contact us to obtain a Return Authorization Number before returning any part. Any parcel without the Return Authorization Number will be rejected.

    If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number.

    Important Notice:
    1. Any returned item(s) without Return authorization number will be rejected.
    2. Please return your item(s) in original packaging and ensure that all packages are securely wrapped.
    3. We will not accept responsibility for loss or damage of goods during transit, please ensure that.

     

    Warranty

    Most of the products have warranty .In the very unlikely event that you have a problem with our product, please contact us via eBay messages.

    Feedback

    We aim to maintain high standards of service and strive to achieve 100% customer satisfaction!
    Your feedback is very important to us, and we sincerely hope that you can contact us immediately before providing us with neutral or negative feedback, so that we can solve your problem satisfactorily.

    LABLT 10Pcs 2 Bolt Solid Base UCFL202-10 5/8" Bore Pillow Block Flange Bearing

    Specifics and features:

    The UCFL pillow block mounted bearing series has two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts.

    This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds.

    This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring.

    Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads.

    The bearing is secured to the shaft with set screws to prevent slippage.

    This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.

    If the bearing is crooked for example when you lay it on a flat table, it is not flat.

    Please don't worry. This is our self-alignment feature. These bearing are meant to have some play in them.

    When you mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct their own alignment once they begin to rotate.

    Because if the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen.

    So our self-alignment feature is a way to prevent this from happening.

    Style: 2 Bolts

    Material: Cast Iron

    Bore Size: 5/8 Inch

    Static Load Rating: 12.80 kN/ 2878 lbs

    Dynamic Load Rating: 12.80 kN/ 2878 lbs

    Max RPM: 3800

    Quantity Per order: 10 Pieces

     

    Notes:

    We strongly recommend professional installation.

    If you are unsure whether the product is suitable for your equipment, please contact us promptly before purchasing to confirm.

    Due to the fact that all detailed dimensions of the product are manually measured, please allow for measurement errors.

    Due to lighting issues during photography, the product images in the link may not reflect the actual color of the item.

    Thank you for collecting our store and looking forward to working with you.

     

     

     


    Payment

    We accept Paypal,Google Pay,VISA,Master Card,American Express,Discover,eBay Mastercard payment .
    Shipping

    All items will be shipped to buyer's eBay address. Please make sure your address in eBay matches the address you would like us to ship to before payment.

    Easy Return

    If you are unhappy with your purchase for any reason, US buyers can return it to us in an un-used condition in the original packaging within 30 days of purchase and we'll give you a refund or exchange. The refund/Exchange will not include postage/eBay costs. Please note you MUST contact us to obtain a Return Authorization Number before returning any part. Any parcel without the Return Authorization Number will be rejected.

    If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number.

    Important Notice:
    1. Any returned item(s) without Return authorization number will be rejected.
    2. Please return your item(s) in original packaging and ensure that all packages are securely wrapped.
    3. We will not accept responsibility for loss or damage of goods during transit, please ensure that.

     

    Warranty

    Most of the products have warranty .In the very unlikely event that you have a problem with our product, please contact us via eBay messages.

    Feedback

    We aim to maintain high standards of service and strive to achieve 100% customer satisfaction!
    Your feedback is very important to us, and we sincerely hope that you can contact us immediately before providing us with neutral or negative feedback, so that we can solve your problem satisfactorily.


    All rights reserved.
    Shop Category
     Store Home
     Auto Actuator
     Auto Circuit Wiring Harness
     Auto Engine System
     Auto Hub
     Auto Ignition System
     Auto Inlet & Outlet System
     Auto Interior
     Auto Motor
     Auto Pump
     Auto Sensor
     Auto Switch
     Auto Valve
     Boat
     Brakes & Brake Parts
     Business & Industrial
     Car Repair Kit
     Carburetor
     Control Arms & Parts
     Exterior Trimming Parts
     Fuel Injector
     Home & Garden
     Lighting & Lamps
     Motorcycle Control System
     Motorcycle engine system
     Motorcycle Ignition System
     Motorcycle Pump
     Motorcycle Valve
     Other
     Radiators & Parts
     Suspension
    Hot Item
    New List Item

    On Aug 1, 2026 at 04:30:33 PDT, seller added the following information:

    Datacaciques