Fit for：

FIAT 500 COMPATIBLE (595 695) California

 

Specifications:

Product Material: High-quality gloss vinyl

Colour: Carbon fibre

Placement on Vehicle: Front, rear, left, right

 

Features:

*Direct Replacement

This window pillar was designed to restore and protect the exterior appearance of your vehicle.

*Excellent Value

Superior quality at a lower price.

*Decoration

The decoration can make the car attractive with a new and fashion appearance.

 

Note:

1.Wipe door pillar clean before pasting, and ensure that the sticker does not touch the water within 24 hours after pasting.

2.There is a protective film on the surface of the product, which needs to be removed after installation.

 

Installation Steps:

1. Remove all fixtures and fittings that overlap with the coverage of the decal (window rubbers etc.).

2. Thoroughly clean the surface of the bodywork, it is important that any grease/contaminants are removed prior to applying the decal.

3. Place a piece of masking tape on the top edge of the decal and position it on the door, take time to ensure that is is correctly lined up on all sides, repositioning it if required.

4. Starting from the top, with the masking tape still in place, slowly peel back the decal backing paper and apply the decal to the bodywork. Working your way down slowly, you can use a soft/felt edge squeegee to prevent air bubbles as you apply the decal. Avoid heavy pressure as this can damage the decal.

5. Next, fold the decal edge over the edge of the door, at this point you may want to lightly warm the decal with a hair dryer, this will soften the material and promote stronger adhesion.

6. Refit all fixtures and fittings.

 

Packaging include:

Pillar posts*6