THIS IS FOR LARGE VENUES, NOT A BEDROOM. PROJECTOR ONLY, NO LENS.
Christie DS+6K-M SXGA+ Large Venue Projector
~ with Twin Lamps Fitted [Lamp Hours (expectancy of 2,000 per lamp, 3,000 in eco mode): just over 1090 hours each]
~ and the requisite Lens Mounting Red Socket Screws (part no. 003-003922-01, can be tightened by hand or via allen key / pliers - they
are specific for the projector model, and are thus bundled here, rather
than with the lenses l'm also selling, and besides, a projector may use
multiple lenses - note however that the projector's lens mounting clamp
holds the lens even without these screws as the relevant photo shows, but it's unwise to rely
solely on the clamp)
~ and a new UK Power Lead
Condition Note: Used (in working order with age-related wear).
Please Note: At the time of writing, l have three of these projectors available, all tested; l have now sold all of the accompanying lenses (for posterity, the lens model was Christie ILS Lens 1.2:1 SX+ / 1.1:1 HD 0.95" 3-Chip DLP)
DETAILS:
[ Based on manufacturer information found at https://www.christiedigital.com/en-gb/products/end-of-support/projectors/christie-ds6k-m/overview ]
OVERVIEW:
The most compact in its class, the Christie M Series projector platform provides the high-performance and feature-rich standards expected in all Christie products. Embedded warping, blending and colour matching, along with built-in portrait capabilities give you even more installation flexibility with this SXGA+ model.
Whether the application is education, entertainment, gaming, home cinema
or live events – Christie’s 3DLP projectors are 2D and 3D capable. This Christie DS+6K-M can be
upgraded from its existing 2D display technology to include 3D
capabilities. Christie was the first to offer an upgrade path for its
3DLP projectors to equip them with the Mirage advanced 3D functionality.
The Christie DS+6K-M, at 6,930 centre lumens (dual lamps, 200W), offers
high efficiency and low cost of ownership by drawing a maximum power of
870W giving you full brightness while using less power.
Technology: 3DLP® [Digital Light Processing technology using three Digital Micromirror Devices (DMDs) per unit of the projected image i.e. one per primary colour - red, green and blue]
Resolution: 1400 x 1050 SXGA+
Brightness: 6,930 centre lumens
Contrast: Up to 10,000:1 (i.e. where white is 10,000 times brighter than black)
Illumination: Dual Osram® 200W P-VIP
Lamp Life: 2,000 hours, up to 3,000 in eco mode
Height: 10.2" (259 mm)
Width: 19.7" (500 mm)
Depth: 22.1" (561 mm)
Weight: 55 lbs (25 kg)
FEATURES:
- SXGA+ resolution (1400 x 1050)
- 6930 centre lumens
- Variable contrast ratio of 2,500-10,000:1 using dynamic iris (full on, full off) / 650:1 ANSI for crisp, detailed images.
- At maximum brightness, this projector draws a maximum power of 870W
- Smallest chassis in its class
- Dual mercury lamps (200W)
- Comprehensive Colour Adjustment (CCA™)
- Embedded Christie Twist™ image warping and edge-blending
- LiteLOC™
- Auto setup
- Digital keystone correction
- Dynamic iris
- Menus in five languages
- 99 channel memories
- Intelligent Lens System (ILS™) for zoom, focus, horizontal and vertical offset for all lenses
- Multi-windowing and processing (up to a 3 x 3 array)
- Motorised yellow notch filter (HD & WUXGA models only)
- Black level blending
- Built-in portrait display capabilities*
- 3D upgradeable
- Built-in portrait display capabilities
- Dust sealed engine, filter-free design
DETAILED SPECIFICATIONS:
Brightness: Dual lamp: 6930 centre (6300 ANSI) lumens / Single lamp: 3465 centre (3150 ANSI) lumens
Contrast: 2,500-10,000:1 (full on/off) 650:1 ANSI (typical)
Uniformity: 90% brightness uniformity
Display type: 3DLP 0.95" DMD
Resolution: SXGA+ (1400 x 1050)
Lamp Type: Dual Osram 200W P-VIP
Lamp Life: High power: 2000 hrs @ 200W / Low power: 3000 hrs @ 150W
Standard Inputs:
- Analog BNC
- Dual-link DVI
Optional Inputs:
- Dual SD/HD-SDI
- Video decoder
Input Signals:
- HDTV formats VGA through to QXGA (2048 x 1536)
- Accepts all current HDTV/DTV formats
- Multi-standard video decoder
Inputs, Control & Networking:
- RS232 in/out
- RS422 in
- Ethernet (10/100)
- USB device
- GPIO (RS232 9-pin male connector)
- Built-in backlit LCD keypad
- Remote control (with optional wired XLR connection)
Pixel Clock: 165 MHz
Scan Rates: Horiztonal: 15 to 120kHz / Vertical: 23.97 to 150Hz
Optical System:
- Dust sealed, 3-chip DMD light engine
- Motorised horizontal and vertical lens offset
- Scheimpflug (tilt) adjustment
- Built-in light shutter
Offsets:
- ±100% Vertical
- ±50% Horizontal
- (* ±23%V / ±13%H)
Standard Accessories [NOT SUPPLIED WITH THE PRESENT ITEM UNLESS EXPLICITLY STATED]:
- User manual
- IR remote
- Line cord
Optional Accessories [NOT SUPPLIED WITH THE PRESENT ITEM UNLESS EXPLICITLY STATED]:
- Coarse dust filter
- Fog juice filter
- Ceiling mount
- Ceiling mount extension
- ILS lens adapter kit
- Stacking frame
- Christie AutoStack™
- Christie AutoStack™ Premium
Operating Voltage: 110-240 VAC 50/60 Hz
Operating Current: 8.7 A @ 100 VAC
Power: 870W
Dissipation: 2971 BTU/hr
Operating Environment:
- Temperature: 40 to 104° F (5 to 40° C)
- Humidity: 10-80% non-condensing
Regulatory Approvals:
- UL/CSA/IEC 60,950 (3rd edition)
- FCC Class A, CE, CCC
- This product conforms to all relevant European directives, standards, safety, health and environmental concerns
- RoHS, WEEE
COMPATIBLE LENS ECOSYSTEM:
Fixed Lenses:
- ILS lens 0.73:1 SX+/0.67:1 HD*
- ILS lens 1.2:1 SX+/1.1:1 HD [PLEASE NOTE: AT TIME OF WRITING, THIS LENS IS ALSO AVAILABLE IN MY INVENTORY]
Zoom Lenses:
- ILS lens 1.25-1.6:1 SX+/1.16-1.49:1 HD**
- ILS lens 1.5-2.0:1 SX+/1.4-1.8:1 HD
- ILS lens 2.0-2.8:1 SX+/1.8-2.6:1 HD
- ILS lens 2.8-4.5:1 SX+/2.6-4.1:1 HD
- ILS lens 4.5-7.3:1 SX+/4.1-6.9:1 HD
- ILS lens 7.3-11.2:1 SX+/6.9-10.4:1 HD
ISSUES:
No known malfunctions. Limited, minor physical scuffs noted around the exterior.