Product Overview
This equipment is mainly used for the sealing monitoring device of the valve and seat ring after the repair. It has the characteristics of high precision, high efficiency, simple operation, convenient carrying, etc., and can accurately detect small gas leakage to ensure the accuracy of the detection results! Say goodbye to traditional gasoline, inkpad and other leak detection methods, which are convenient, fast, and highly reliable!
Product Parameters
| Air source pressure: | 0.8MPa |
| Package size: | 15"*11"*9.4" (38cm*28cm*24cm) |
| Net weight/Gross weight: | 9.3lbs(4.2kg)/10.5lbs(4.75kg) |
| Caution: Please use with your own air compressor. Air compressor not included in the package | |
Product Features & Advantages
a. Handle
Weighing only 9.3 lbs, this super lightweight valve cylinder vacuum leak detector with a portable handle can quickly be taken anywhere; Comfortable grip, easy for one person to move the machine.
b. Control Panel
There is a manual switch on the middle of the machine, which is easy to operate the machine. It is also equipped with an input positive pressure gauge and an output negative pressure gauge for easy observation of test results.
c. Considerate Details
The sealing performance of the cylinder head and valve assembly can be tested by injecting high pressure gas into the outlet test hole and then observing the pressure change. If there is a leak, the pressure drops, helping to diagnose the problem.
d. Heat Emission Hole
The machine is designed with heat dissipation holes, which can timely discharge the excess heat generated in the process of work, prevent overheating and protect the machine.
e. Supporting Leg
Four rubber supporting legs at the bottom, which are non-slip, wear-resistant, good silence, can ensure the stability of the machine, and can prevent water from entering the machine from the bottom.
Precautions for Use
- Before use, you should check the appearance of the leakage tester, the pressure gauge and other components without damage to the pointer is normal, because the leakage tester internal pressure gauge and other precision parts, should be gently held, do not bump. Ensure that the air supply from the air pump is clean and free from impurities and oil.
- Connect the leak tester to the air pump and check the positive pressure gauge should be above 0.65Mpa. Extended air pipe for leakage testing machine must be connected with filter to avoid impurity inhalation. (Filter arrow points to the direction of the leak detector).
- Select different size plugs according to the size of the engine branch pipe opening. After the switch is turned on, move the plug appropriately and press it tightly, and wait for the needle of the negative pressure gauge to stabilize before letting go.
Product Presentation & Details
Item Included (057058)
| Valve Cylinder Vacuum Leak Detector *1 | Accessory Kit *1 |
On Feb 10, 2026 at 22:00:52 PST, seller added the following information: