Auto Start Stop Eliminator - Easy-Install Autostop Eliminator Made for 2023-2025 Rogue
Product Description
?Compatible with: 2023-2025 Rogue.
✅Core function: At the moment you start the vehicle, it can intelligently and delayed simulate the electronic signal of manually pressing the "start stop close" button on the center console, making the system default to the off state, without the need for you to repeat the operation every time you get on the car.
✅Easy installation: Insert the OBD-II diagnostic interface under the steering wheel or connect the original vehicle switch harness in series to achieve it, without the need for wire modification, breakage, or programming. It does not affect the original vehicle circuit and warranty, and can be restored at any time.
✅Package Contents: 1* Auto Start-Stop Eliminator.
✅Installation Steps Part: Step1 : Remove the center console panel Use a pry bar to carefully pry the panel from the edge of the armrest box or center console, paying attention to the location of the clips to avoid damage caused by excessive force. Step 2: Locate the start/stop button harness Locate the wiring harness plug (usually a 4-pin connector) behind the auto start/stop button, press the snap and unplug the original plug.
✅Installation Steps Part: Step 3: Connect the Shield Connect the two ends of the shield to the original plug and the start/stop button socket respectively, make sure the interface matches (the wrong shape of the plug can not be inserted) Step 4: Restore the panel and test Install the panel back and start the vehicle, make sure the instrument panel shows that the start/stop function has been turned off (if “A OFF” is displayed, it is successful).
✅Core function: At the moment you start the vehicle, it can intelligently and delayed simulate the electronic signal of manually pressing the "start stop close" button on the center console, making the system default to the off state, without the need for you to repeat the operation every time you get on the car.
✅Easy installation: Insert the OBD-II diagnostic interface under the steering wheel or connect the original vehicle switch harness in series to achieve it, without the need for wire modification, breakage, or programming. It does not affect the original vehicle circuit and warranty, and can be restored at any time.
✅Package Contents: 1* Auto Start-Stop Eliminator.
✅Installation Steps Part: Step1 : Remove the center console panel Use a pry bar to carefully pry the panel from the edge of the armrest box or center console, paying attention to the location of the clips to avoid damage caused by excessive force. Step 2: Locate the start/stop button harness Locate the wiring harness plug (usually a 4-pin connector) behind the auto start/stop button, press the snap and unplug the original plug.
✅Installation Steps Part: Step 3: Connect the Shield Connect the two ends of the shield to the original plug and the start/stop button socket respectively, make sure the interface matches (the wrong shape of the plug can not be inserted) Step 4: Restore the panel and test Install the panel back and start the vehicle, make sure the instrument panel shows that the start/stop function has been turned off (if “A OFF” is displayed, it is successful).