• Fitment
  • For Acura Csx 2006-2011 For Acura Ilx 2013-2020 For Acura Tl 2004-2008 For Acura Tsx 2004-2008 For Honda Accord 2003-2007 For Honda Civic 2006-2020 For Honda Element 2007-2010 For Honda Fit 2013-2014 For Honda INsight 2019-2020
  •  
  • Package Include
  • (2) Wheel Bearings
  •  
  • Hub Unit Installation Guide
    • Step 1: Safety & Disassembly
    1.  Engage parking brake and securely support vehicle with jack stands
    2. Remove wheel, unbolt brake caliper (hang it up with wire, don't stretch the hose), and remove brake rotor
    3. Remove axle nut and use a puller to remove the old hub unit
  • 2 Front Wheel Bearings For Honda Civic Accord Element & Acura TL TSX ILX CSX

    Fitment

    For Acura Csx 2006-2011
    For Acura Ilx 2013-2020
    For Acura Tl 2004-2008
    For Acura Tsx 2004-2008
    For Honda Accord 2003-2007
    For Honda Civic 2006-2020
    For Honda Element 2007-2010
    For Honda Fit 2013-2014
    For Honda INsight 2019-2020

     

    Package Include

    (2) Wheel Bearings

     

    Hub Unit Installation Guide

    • Step 1: Safety & Disassembly
    1.  Engage parking brake and securely support vehicle with jack stands
    2. Remove wheel, unbolt brake caliper (hang it up with wire, don't stretch the hose), and remove brake rotor

    3. Remove axle nut and use a puller to remove the old hub unit

    • Step 2: Cleaning & Preparation
    1. Thoroughly clean the hub mounting surface on the steering knuckle, ensure it's free of rust and debris

    2. Inspect the new hub unit, avoid touching the magnetic ABS sensor ring with bare hands

    • Step 3: Installation & Tightening
    1. Position the new hub unit straight into place

    2. Use a proper tool (e.g., press or socket) to press/guide it evenly into position

    3. You must use a torque wrench to tighten all mounting bolts and the new axle nut to the specified torque

    • Step 4: Reassembly & Inspection

    1. Reinstall the brake rotor, caliper, and wheel

    2. Lower the vehicle, then lift the wheel off the ground with the car's jack to check for smooth rotation

    3. Perform a test drive to ensure no abnormal noise and the ABS warning light is off

     

    Critical Warnings

    • Mounting surface must be perfectly clean, no rust or dirt
    • Never strike the new hub unit directly with a hammer! This will instantly damage the bearing and ABS function
    • Always use a new axle nut! A used nut can loosen and cause a serious failure
    • Do not touch the magnetic ABS ring

    Item Specifics
    Brand everpartstorecs
    Manufacturer Part Number 13463676
    Manufacturer Warranty 1 Year
    Placement on Vehicle Front Left Right
    Type Wheel Bearing
    Material Steel
    OE/OEM Part Number 510073
    Performance Part Yes
    Universal Fitment No
    Vintage Car Part No
    Fitment type Direct replacement
    Surface Finish Polished, Rust Protected
    Items Included 2pcs of Wheel Bearings
    Quantity 2
    ABS Sensor Not has ABS sensor
    Item Weight 4.01 LB
    Interchange Part Number 44300SDAA52, C2P12624
    Width 1.63 In
    Outer Diameter 3.38 In
    Spline Quantity N/A

    Shipping

    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    Payment

    Any payments accepted by ebay also can be accepted.

    Service

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    Note

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.

    2 Front Wheel Bearings For Honda Civic Accord Element & Acura TL TSX ILX CSX

    Fitment

    For Acura Csx 2006-2011
    For Acura Ilx 2013-2020
    For Acura Tl 2004-2008
    For Acura Tsx 2004-2008
    For Honda Accord 2003-2007
    For Honda Civic 2006-2020
    For Honda Element 2007-2010
    For Honda Fit 2013-2014
    For Honda INsight 2019-2020

     

    Package Include

    (2) Wheel Bearings

     

    Hub Unit Installation Guide

    • Step 1: Safety & Disassembly
    1.  Engage parking brake and securely support vehicle with jack stands
    2. Remove wheel, unbolt brake caliper (hang it up with wire, don't stretch the hose), and remove brake rotor

    3. Remove axle nut and use a puller to remove the old hub unit

    • Step 2: Cleaning & Preparation
    1. Thoroughly clean the hub mounting surface on the steering knuckle, ensure it's free of rust and debris

    2. Inspect the new hub unit, avoid touching the magnetic ABS sensor ring with bare hands

    • Step 3: Installation & Tightening
    1. Position the new hub unit straight into place

    2. Use a proper tool (e.g., press or socket) to press/guide it evenly into position

    3. You must use a torque wrench to tighten all mounting bolts and the new axle nut to the specified torque

    • Step 4: Reassembly & Inspection

    1. Reinstall the brake rotor, caliper, and wheel

    2. Lower the vehicle, then lift the wheel off the ground with the car's jack to check for smooth rotation

    3. Perform a test drive to ensure no abnormal noise and the ABS warning light is off

     

    Critical Warnings

    • Mounting surface must be perfectly clean, no rust or dirt
    • Never strike the new hub unit directly with a hammer! This will instantly damage the bearing and ABS function
    • Always use a new axle nut! A used nut can loosen and cause a serious failure
    • Do not touch the magnetic ABS ring


    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    Any payments accepted by ebay also can be accepted.

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.