- (2) Handle Grip - Part #720-0274 (1.0" ID x 5.0" length, foam grip)

- (1) Machine Screw - Part #710-1233 (#10-24 x 1.375")

- (1) Handle Assembly, Clutch Lock RH - Part #731-04784 (right hand, supersedes to 631-04134B)

- (1) Handle Assembly, Engagement LH - Part #684-04105 (left hand, supersedes to 684-04105D)

- (1) Shoulder Screw - Part #738-04122 (.437 x 1.345, 1/4-20, supersedes to 738-04348)

- (1) Handle Assembly, Engagement RH - Part #684-04106 (right hand, supersedes to 684-04106D)

- (2) Z-Fitting, Cable - Part #746-0778 (cable end fitting, supersedes to 946-0778)

- (1) Bumper, Rubber - Part #735-0199A (.62" OD x .22", DISCONTINUED/NOT AVAILABLE NEW)

- (1) Handle Assembly, Clutch Lock LH - Part #731-04785 (left hand, supersedes to 631-04133A)

- (1) Upper Handle LH - Part #749-04142-0638 (left hand, red, supersedes to 749-04191A-0637)

- (1) Upper Handle RH - Part #749-04141-0638 (right hand, red, supersedes to 749-04190A-0637)

- Complete handle assembly rebuild kit

- Used, removed from working snowblower

- Upper handles 749-04141/749-04142: Good condition, minor paint wear, no cracks or bends

- Clutch lock handles 731-04784/731-04785: Good condition, functional mechanisms

- Engagement handles 684-04105/684-04106: Good condition, spring-loaded mechanisms work properly

- Handle grips 720-0274: Good condition, minor wear, foam intact

- Z-fitting cables 746-0778: Good condition, threads clean (2 pieces)

- Rubber bumper 735-0199A: Good condition, rubber supple

- Shoulder screw and machine screw: Good condition

- All parts ready to install

- OEM Troy-Bilt / MTD / Cub Cadet / Craftsman Parts

- Upper Handles: Red color (MTD/Troy-Bilt Red -0638), left and right pair

- Clutch Lock Handles: Spring-loaded locking mechanism for operator presence control

- Engagement Handles: Controls auger engagement, spring-loaded return, both left and right

- Handle Grips: Foam comfort grips, 1.0" inside diameter, 5.0" length

- Z-Fittings: Cable end fittings for control cables (2 pieces included)

- Rubber Bumper: DISCONTINUED part, not available new

- Complete handle assembly hardware for rebuild

✓ Troy-Bilt Storm series (24", 26", 28", 30")

✓ Troy-Bilt Storm 2410, 2420, 2620, 2625, 2690, 2840, 2890, 3090

✓ Troy-Bilt Storm Tracker 2690, 2690XP, 2890

✓ MTD two-stage snowblowers

✓ Yard Machines two-stage snowblowers

✓ Cub Cadet 2X/3X series snowblowers

✓ Craftsman snowblowers (MTD-built models)

- Troy-Bilt: 31AE6GQ3711 (Storm 26"), 31BM63P3711 (Storm 2620), 31AS62N2711 (Storm 2410)

- Troy-Bilt: 31AH55Q5766, 31AH55R5711, 31AM5FP4B66

- MTD: 31A series two-stage models

- Yard Machines: Various two-stage models

- Cub Cadet: 2X and 3X series models

- Craftsman: MTD-built two-stage models

- Check your parts diagram for exact compatibility

- Upper handles provide operator control position and mounting for controls

- Clutch lock handles control operator presence safety system

- Engagement handles control auger/impeller operation (left and right sides)

- Handle grips provide comfort and control for operator

- Z-fittings connect control cables to levers (2 fittings for multiple cables)

- Rubber bumper provides cushion between handle components

- Complete kit for handle assembly rebuild or replacement

- Broken or cracked upper handles

- Worn or damaged handle grips

- Clutch lock mechanism not holding

- Engagement handles broken or spring damaged

- Control cables disconnected or damaged

- Cable end fittings worn or stripped

- Rubber bumper deteriorated or missing

- Handle assembly damage from impact or stress

- Controls not functioning properly

- Upper handles mount to lower handle assembly

- Install clutch lock and engagement handles with proper spring orientation

- Both engagement handles (LH and RH) control auger operation

- Slide handle grips onto upper handle ends

- Connect control cables using Z-fittings (2 included for multiple cable connections)

- Install rubber bumper between handle components

- Adjust clutch lock mechanism for proper engagement

- Test all controls before full operation

- Refer to service manual for detailed installation instructions

- Complete handle assembly parts in one lot

- Includes both upper handles (most expensive components at $48.99 each new)

- All FOUR control handles included (clutch lock LH/RH, engagement LH/RH)

- Both handle grips included

- TWO Z-fittings for cable connections

- Includes DISCONTINUED rubber bumper 735-0199A (not available new)

- All matching OEM parts from same snowblower

- Better value than buying parts separately ($240+ new value)

- Saves time sourcing individual components

- Perfect for complete handle rebuild

- Upper handles are in MTD/TROY-BILT RED color (part suffix -0638)

- Other colors available separately if needed

- Check your snowblower's handle color before ordering

- Handle Grips: 1.0" ID x 5.0" length, foam material

- Upper Handles: Powder-coated steel, red color

- Control Handles: Spring-loaded mechanisms

- Z-Fittings: Cable end connectors with threads

- Rubber Bumper: .62" OD x .22" size

- All OEM specifications

- USPS Ground Advantage

- Well-packaged to prevent damage

- Ships within 1 business day

- 30-day return policy

- Buyer pays return shipping

- Items must be in same condition as received

All photos show the actual parts you will receive. What you see is what you get!

NOTE: This is a comprehensive handle assembly parts lot with everything needed for a complete handle rebuild. The upper handles are the most expensive components at nearly $50 each new ($97.98 total for the pair). The kit includes all FOUR control handles (2 clutch lock, 2 engagement LH/RH), both handle grips, TWO Z-fittings for cable connections, and all necessary hardware including one DISCONTINUED part (rubber bumper) that is no longer available new. This complete matching set from one snowblower saves you time and money versus sourcing parts individually. Perfect for repairing damaged handle assemblies or rebuilding worn handles!