🔥 eBay has so much cheap A$$ Temu parts or counterfeit parts🔥

Why Waste your money on cheap junk?

Buy quality parts from us, most of what we sell is original equipment.

We back up the quality of our listings with a 30 day warranty on everything we sell to be the way we listed it.

Do not blame us if you don't read the description and look at the pictures good. And not talking about a 6inch phone screen.

(.)(.)  (.)(.)  (.)(.)  Save The Tatas  (.)(.)  (.)(.)  (.)(.)

Proud sponsor of Susan G Komen

⬇️ Important ⬇️

I do every thing I can do to prevent returns, So I ask you to do your do diligence to be sure to look at all the Photos and read the complete description3

Do not blame us if you don't read our description and look at all the photos

CHECK OUR FEEDBACK & BUY WITH CONFIDENCE!!

International Buyers Welcome

***  CHECK OUT OUR EBAY STORE!!! 

DESCRIPTION

🔥 Genuine  Custom Dynamics 🔥

Size is 7.1"x2.2"inch each Light

Universal Flatz LED Run Brake Turn Signals Chrome Trim

  These lights can be mounted to any flat surface, can be accent lights or your main Tail Light Assembly along with your Brake Light Turn Signals if you decide to remove your existing taillight

Super-bright (131 LEDs per unit) accent lights
Super-low profile design, measure 7.1" L x 2.2" W x 0.7" H
Mount with 3M double-sided tape to any flat surface; work great on saddlebags or filler panels
Three-wire hookup (low, high, ground)
Can be wired as run/brake, run/turn or run/brake/turn signals

This is from AI Description


Custom Dynamics FLATZ lights go on flat surfaces like fender filler panels or saddlebags, using strong 3M adhesive tape, often installed in the rear fender area to add accent lighting or function as brake/turn signals after removing stock lights, wired to the bike's harness for run/brake/turn functions. 
Where to Install
Fender Filler Panels: The most common spot is the empty area on the rear fender, fitting snugly against the fender's curve.
Saddlebags: They can also be mounted on saddlebags for additional visibility. 
Installation Tips
Clean Surface: Thoroughly clean the mounting area and use the included surface promoter for better adhesion.
Positioning: Place them within a finger's width of the fender line for maximum contact and appearance.
Wiring: Route wires through existing holes, connecting to the motorcycle's harness (often using adapters like the MPR-BCM-PLUG for specific models).
Functionality: Wire them as run/brake/turn, or just run/turn signals, depending on your preference and the included controller.
Secure: Apply even pressure and use zip ties to secure wires, avoiding moving parts and heat. 
Key Considerations
Adhesive: Ensure the surface is clean and warm (above 65°F) for optimal 3M tape bonding, allowing 24 hours to cure.
Flash Rate: You may need a load equalizer (like a Signal Stabilizer or SMART Triple Play) for a normal flash rate if converting from incandescent bulbs.

Fits

FITMENT 

Touring 14-25

Road Glide Limited, Electra Glide, Ultra Glide, Road King, CVO Ultra Models

14-23 Street Glide, Road Glide

14-22 CVO Street Glide, CVO Road Glide

Trike Models 14-25

Triglide, Freewheeler & RG3 { Road Glide 3 }

.NewGreat Condition


We all are bikers Here, So Lets Use Common Sense Here
If It doesn't look like what you are needing, DO NOT BUY IT.

Please Don't Ask Questions That The Listing or Photos Answers For You.

If you do not See it in the photos, Then it is not included

International Buyers Welcome

PLEASE SEE ALL PICS

This comes as you see it in pics

PICS SPEAK FOR their selfs

If you don't like it Please email me


IF YOU ARE NOT SURE IF THIS IS  WHAT YOU WANT PLEASE DO NOT BUY THIS.

Return Service Agreement
We will accept Returns for any reason, There Maybe up to 20% Restocking fee Charged to help to recover shipping cost.
Please List Proper Reason for Return
If you overlook Something or do not read the Description Good. No shipping will be refunded, and you will need to return the item.

We are Not responsible for fitment or the color of the item. I expect you to do your Due Diligence to be sure this is the item you are wanting. I will certainly be glad to help If I can.

If Anything Is Damaged In Shipping, Or Item That Was Describe Incorrectly, Or Any Other Reason, This Must Be Brought To My Attention With In 7 Days Of Arrival.

If There Is Something Wrong With  The Item Please email Me

Most Of The Stuff I Sell Is Used And It All Can Not Be Perfect, 

I Do Not Mind Taking Back Returns. But Please Email Me Before Starting Any Return. 

Any Return Started As Item As Not Describe Maybe Denied.

Without contacting us first.


I Do Not Like To Deal With Picky People That Is Hard To Deal With, Or Be Pleased. 

If You Demand Perfection Please Buy From  Your Local Dealer


THANKS FOR LOOKING   GOOD LUCK  RIDE SAFE 

Thank You, and have a Great Day!!!

Thank you for considering