Package Included:
4x 9005+9006 LED headlight bulbs (High Beam + Low Beam)
2x 880 LED fog light bulbs
4x 9005+9006 LED headlight bulbs (High Beam + Low Beam)
2x 880 LED fog light bulbs
Technical Specification:
Waterproof: Well sealed, high waterproof rating, IP 67
Power: 200W/set (10W/bulb)
Luminous Flux: 20000lm/set (10000lm/bulb)
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K-6500K
IP67 rated water and dust seal,360 degree beam angle
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Over 50,000hrs lifetime
Usage: headlight,fog light
Advantage:
*Latest 3570 CSP chip light source, 2 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*White light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
Waterproof: Well sealed, high waterproof rating, IP 67
Power: 200W/set (10W/bulb)
Luminous Flux: 20000lm/set (10000lm/bulb)
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K-6500K
IP67 rated water and dust seal,360 degree beam angle
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Over 50,000hrs lifetime
Usage: headlight,fog light
Advantage:
*Latest 3570 CSP chip light source, 2 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*White light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
Two-way heat dissipation channel:
1.All-in-one aluminum profile as heat conduction system, 360 degree heat radiating
2.High speed mute fan (12000R/Min),high Air flow for faster cooling rate
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1.All-in-one aluminum profile as heat conduction system, 360 degree heat radiating
2.High speed mute fan (12000R/Min),high Air flow for faster cooling rate
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.