PROP NUMBER 11340 IN MY INVENTORY.

16" X 20P POWERTECH LFS3 STAINLESS STEEL PROPELLER, POWERTECH CUSHION LOK HUB KIT NOT INCLUDED, LFS3R20PCL200, EXTREMELY NICE PROP THAT HAS MINIMAL RUN TIME ON IT, STANDARD RIGHT HAND ROTATION.

THIS PROP FITS THE FOLLOWING OUTBOARD ENGINES/OUTDRIVES BELOW WITH A 4.75" GEARCASE AND A CORRECT POWERTECH CUSHION LOK HUB KIT TO MATCH THE APPLICATION.  VERIFY THIS IS WHAT YOU HAVE/NEED BEFORE PURCHASING AS I DO NOT ACCEPT RETURNS BASED ON FITMENT ISSUES OUT OF MY CONTROL THAT ARE ON YOUR END.  FEEL FREE TO SEND ME A MESSAGE TO VERIFY WHAT ENGINE YOU ARE WANTING TO PUT THIS ON IF UNSURE AND I CAN HELP ANYWAY I CAN.  I HAVE POWERTECH CUSHION LOK HUB KITS AVAILABLE AT AN ADDITIONAL COST AS WELL.  MESSAGE ME WITH ALL YOUR ENGINE DETAILS IF YOU NEED A HUB KIT AND I CAN PRICE IT OUT FOR YOU.  THEY ARE ALL DIFFERENT PRICES DEPENDING ON ENGINE DETAILS. 

1. YAMAHA 150HP-300HP TWO STROKE AND FOUR STROKE OUTBOARDS, YAMAHA F350 V6 4.3L FOUR STROKE OUTBOARD (15 SPLINE PROP SHAFT, 4.75" GEARCASE)
2. YAMAHA 300HP-350HP V8 OUTBOARDS WITH THE 5.25" GEARCASE AND 17 SPLINE PROP SHAFT (MUST USE POWERTECH 17 SPLINE HUB KIT WITH THE ADAPTER RING THAT TAKES UP THE SPACE OF A 4.75" GEARCASE PROP)
3. YAMAHA STERNDRIVE AND OUTDRIVES (15 SPLINE PROP SHAFT AND 4.75" GEARCASE)
4. MERCURY/MARINER/MERCURY RACING 135HP-300HP TWO AND FOUR STROKE OUTBOARDS WITH A 4.75" GEARCASE  AND A 15 SPLINE PROP SHAFT ONLY.  POWERTECH DOES NOT MAKE A 19 SPLINE CUSHION LOK HUB KIT SO VERIFY THIS PRIOR TO PURCHASE.
5. MERCURY 90HP-115HP FOUR STROKE COMMAND THRUST OUTBOARDS ONLY (15 SPLINE PROP SHAFT, 4.75" GEARCASE).  WILL NOT FIT STANDARD 90HP-115HP 15 SPLINE 4.25" GEARCASE OUTBOARDS.
6. MERCURY ALPHA 1 AND MERCURY BRAVO 1 OUTDRIVES (4.75" GEARCASE 15 SPLINE PROP SHAFT ONLY).  POWERTECH DOES NOT MAKE A 19 SPLINE CUSHION LOK HUB KIT SO VERIFY THIS PRIOR TO PURCHASE.
7. HONDA 150HP-300HP FOUR STROKE OUTBOARDS (15 SPLINE PROP SHAFT, 4.75" GEARCASE) 
8. SUZUKI 150HP-300HP TWO AND FOUR STROKE OUTBOARDS (15 SPLINE PROP SHAFT, 4.75" GEARCASE)
9. OMC/EVINRUDE/JOHNSON 150HP-300HP TWO STROKE OUTBOARDS (15 SPLINE PROP SHAFT, 4.75" GEARCASE)
10. OMC/EVINRUDE/JOHNSON 90HP-140HP TWO STROKE OUTBOARDS WITH THE LARGE 15 SPLINE PROP SHAFT AND A 4.75" GEARCASE.  VERY RARE.  WILL NOT FIT THE STANDARD V4 13 SPLINE PROP SHAFT 4.25" GEARCASE ENGINES THAT MOST OF THESE ENGINES ARE.
    
11. OMC/EVINRUDE/JOHNSON COBRA OUTDRIVES (15 SPLINE ONLY, 4.75" GEARCASE SIZE).  POWERTECH DOES NOT MAKE A 19 SPLINE CUSHION LOK HUB KIT FOR THE KING COBRA OUTDRIVES.  WILL NOT FIT THE SMALLER 13 SPLINE COBRA OUTDRIVES EITHER.  VERIFIY PRIOR TO PURCHASING WHAT YOU HAVE.
12. TOHATSU/NISSAN OUTBOARDS (MADE BY HONDA) THAT HAVE A 4.75" GEARCASE AND A 15 SPLINE PROP SHAFT.

LOCATED IN GAINESVILLE, FLORIDA FOR LOCAL PICKUP.  I USUALLY SHIP OUT SAME DAY AS PURCHASE AND TRY TO GET THE ITEM OUT AS SOON AS POSSIBLE.  IF YOU ARE IN ALASKA, HAWAII, OR PUERTO RICO AND THE PROP DOES NOT FIT IN A USPS FLAT RATE PRIORITY BOX EXTRA SHIPPING CHARGES WILL APPLY.  I ONLY SHIP IN THE LOWER 48 FOR THE FEE ASSOCIATED WITH THIS LISTING IF PART OF THE UNITED STATES.  INTERNATIONAL BUYERS CAN PURCHASE VIA THE EBAY GLOBAL SHIPPING PROGRAM.  IF THE PROP IS IN A FACTORY PROP BOX I WILL BREAK DOWN THE BOX AND TRY TO GET THE SHIPPING AS REASONABLE AS I CAN.      

I HAVE 1000S OF PROPS SO IF THIS IS NOT THE PROP OR PITCH YOU ARE LOOKING FOR OR YOU ARE UNSURE FEEL FREE TO SEND ME A MESSAGE.  THANKS, MATT

SOLD AS IS/WHERE IS.  MAKE SURE YOU USE THE CORRECT HARDWARE AND TRIM TAB ANODES WHEN INSTALLING ANY PROP AS MANY ARE INTERCHANGEABLE WITH THE CORRECT HARDWARE/TRIM TAB ANODE AND DAMAGE MAY OCCUR IF NOT USING CORRECT HARDWARE/TRIM TAB ANODE.  I AM NOT RESPONSIBLE FOR AN INCORRECT INSTALLATION.

ALL PRICES ARE FIRM.  PLEASE DO NOT SEND ME A MESSAGE ASKING IF I WILL TAKE LESS.  I WILL NOT.

NEW PROPS:  I WILL ONLY TAKE A RETURN WITHIN THE EBAY GUIDELINES AND PROP MUST BE IN SAME CONDITION AS RECEIVED WHICH IS A NEW PROP, NOT INSTALLED OR RAN.