Product description:
*Product model: long 9 lights
*Packing quantity: 2 pcs/set
*Size: Total length: 16.2CM wide 2.5CM
*Number of LED lights: 9
*Applicable models: all models. DC 12V
*Color:yellow
Features:
*Using flexible circuit boards and glue, it can be installed on rearview mirrors with curved surfaces.
*It can be used in combination with turning lights or small lights.
*High temperature resistant, waterproof material, durable.
*Use thin LEDs.
Matters needing attention:
1.Before attaching this product, please clean the surface of the rearview mirror with a scouring oil.
2. When connecting wires, please pay attention to distinguish the polarity of the wires and connect the wires correctly.
3. If the rearview mirror is a folding mirror, please reserve enough lead wires.
4. The wires should be fixed well to avoid breaking the wires when opening the door.
Installation instructions:
Method (1): When the mirror must be removed
1. First bend this product into the same arc as the mirror.
2. Stick it on again.
3. Remove the tripod in the car.
4. Loosen the screws and remove the mirror.
5. Pass the wire through the round hole of the tripod into the car.
6. Use double-sided tape to fix the wire under the mirror so that it is not easy to see the wire.
7. Use the gap to connect the wires to the engine room and connect to the small lights.
8. The installation is complete.
Method (2): When you don’t need to remove the mirror
1. First bend this product into the same arc as the mirror.
2. Stick it on again.
3. Use double-sided tape to fix the wire under the mirror so that it is not easy to see the wire.
4. The wires are pasted along the mirror to the seam of the door.
5. Use the gap to connect the wires to the engine room and connect to the small lights.
6. The installation is complete.
7. The lights can still be seen from the rear.
Package Contents:
A set (2PCS) Soft turn light
