• Detail 

    • Fit for 81-83 Suzuki GS550/650 Intake Manifold Carb Boot Kit Right &Left 4 Pcs

    Detail 

    Intake manifold Definition
    The intake manifold is located between the throttle and the intake valve of the engine. After the air enters the throttle and passes through the manifold buffer, the air flow path is divided here. The intake manifold interface is the interface that connects the intake manifold to the engine block and is installed at the intake manifold port.
    Fault Feature:
    If the intake manifold interface is broken, it may cause high idle speed, low acceleration, and easy to extinguish when accelerating. Replacing the new intake manifold interface at this point can solve these problems.
    Feature:
    This product is made of high quality rubber and is durable. It has the advantages of high temperature resistance, high pressure resistance and corrosion resistance.、

    MPN：

    GL1078CB113CE


    Applicable Model:
    Fit for suzuki 1980-1980 GS550
    Fit for suzuki 1980-1980 GS550E
    Fit for suzuki 1981-1981 GS550T
    Fit for suzuki 1981-1982 GS650E
    Fit for suzuki 1981-1983 GS650G
    Please refer to the adaptation table for suzuki the specific model.
    Installation:
    Easy to install, directly replace the old or broken intake manifold interface when installing. Tools (including other tools such as screwdriver wrenches) may be required. It takes about 30 minutes to an hour. You can also go to the local modification store or garage to install
    Installation steps
    1. To install the intake pipe, you need to remove the carburetor. First remove the seat cushion, loosen the fixing screws of the air filter, and move the air filter to the rear.
    2. Then you can easily remove the carburetor, and finally remove the intake pipe.
    3. If it is Euro 2 type, the intake pipe screw may need to be removed with an impact screwdriver.
    4. There should be a rubber O-ring in the aluminum groove behind the intake pipe. You can replace the old one or replace it with a new one.
    5. Do not start immediately after installation, wait until the oil in the oil pipe enters the carburetor and start again.
    Package include:
    4×Intake manifold boot
    4×Hose clamp
    4×Gasket


    Item Specifics
    Brand for Suzuki
    Manufacturer Part Number ON495142L
    Warranty 90 Day
    Color Black
    Type Carburetor Intake Manifold Boot
    Fitment Type Direct Replacement
    Materiel Metal + rubber
    Placement Intake manifold

    Payment

    [ Policy: The above tab label style can be modified in left Basic - Footer Policy section.

    And this area is the details contents of your policies. You can add a banner for this policy as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]

    Shipping

    [ Shipping: This is the contents of your Shipping. You can add a banner for this Shipping as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]

    Returns

    [ Return: This is the contents of your Return. You can add a banner for this Return as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]

    Contact Us

    [ Contact Us: This is the contents of your Contact Us. You can add a banner for this Contact Us as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]

    Shop Category
     Store Home
     Pumps
     Transmission System
     Brakes & Brake Parts
     Suspension
     Steering
     Exhaust & Emission Systems
     Auto Sensor
     Air Conditioning System
     Auto Circuit Wiring Harness
     Auto Actuator
     Auto Tools
     Auto Motor
     Auto Valves
     Cooling System
     Auto Engine Sytem
     Auto Fuel System
     Auto Intake System
     RV Accessories
     Motorcycle
     Auto Hub
     Other
    Hot Item
    Delivery

    content_src_url

    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Fit for 81-83 Suzuki GS550/650 Intake Manifold Carb Boot Kit Right &Left 4 Pcs

    Detail 

    Intake manifold Definition
    The intake manifold is located between the throttle and the intake valve of the engine. After the air enters the throttle and passes through the manifold buffer, the air flow path is divided here. The intake manifold interface is the interface that connects the intake manifold to the engine block and is installed at the intake manifold port.
    Fault Feature:
    If the intake manifold interface is broken, it may cause high idle speed, low acceleration, and easy to extinguish when accelerating. Replacing the new intake manifold interface at this point can solve these problems.
    Feature:
    This product is made of high quality rubber and is durable. It has the advantages of high temperature resistance, high pressure resistance and corrosion resistance.、

    MPN：

    GL1078CB113CE


    Applicable Model:
    Fit for suzuki 1980-1980 GS550
    Fit for suzuki 1980-1980 GS550E
    Fit for suzuki 1981-1981 GS550T
    Fit for suzuki 1981-1982 GS650E
    Fit for suzuki 1981-1983 GS650G
    Please refer to the adaptation table for suzuki the specific model.
    Installation:
    Easy to install, directly replace the old or broken intake manifold interface when installing. Tools (including other tools such as screwdriver wrenches) may be required. It takes about 30 minutes to an hour. You can also go to the local modification store or garage to install
    Installation steps
    1. To install the intake pipe, you need to remove the carburetor. First remove the seat cushion, loosen the fixing screws of the air filter, and move the air filter to the rear.
    2. Then you can easily remove the carburetor, and finally remove the intake pipe.
    3. If it is Euro 2 type, the intake pipe screw may need to be removed with an impact screwdriver.
    4. There should be a rubber O-ring in the aluminum groove behind the intake pipe. You can replace the old one or replace it with a new one.
    5. Do not start immediately after installation, wait until the oil in the oil pipe enters the carburetor and start again.
    Package include:
    4×Intake manifold boot
    4×Hose clamp
    4×Gasket

    Item Specifics
    Brand :for Suzuki
    Manufacturer Part Number :ON495142L
    Warranty :90 Day
    Color :Black
    Type :Carburetor Intake Manifold Boot
    Fitment Type :Direct Replacement
    Materiel :Metal + rubber
    Placement :Intake manifold


    [ Policy: The above tab label style can be modified in left Basic - Footer Policy section.

    And this area is the details contents of your policies. You can add a banner for this policy as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]

    [ Shipping: This is the contents of your Shipping. You can add a banner for this Shipping as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]

    [ Return: This is the contents of your Return. You can add a banner for this Return as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]

    [ Contact Us: This is the contents of your Contact Us. You can add a banner for this Contact Us as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]


    All rights reserved.

    On Dec 30, 2025 at 03:38:21 PST, seller added the following information:

    Datacaciques