• Feature:
  • Brand-new high-quality products have been strictly inspected before leaving the factory. Comply with professional specifications and stable performance.
  • 1.All products have been strictly inspected, we want to create a perfect shopping experience for you.

    • LED Headlight Assembly Kit Lamp Pair Rear LH Right Fits 2011-2013 Toyota Corolla

    Feature:

    Brand-new high-quality products have been strictly inspected before leaving the factory. Comply with professional specifications and stable performance.

    1.All products have been strictly inspected, we want to create a perfect shopping experience for you.

    2.High quality lights.Safety and Durable.
    3.Condition: 100% Brand New and High Quality
    4.Material: ABS Plastic Housing / Polycarbonate Lens
    5.High grade ABS plastic. For toughness, impact resistance, and heat resistance.
    6.Plug and Play Operation, Direct Bolt-On OE Fitment or Replacement for the Stock Unit.
    7.Requires no Modification or Drilling.
    8.Brings a Different Appearance to Vehicle thats Great for Show Use or to Replace Old and Worn Headlights.

     

    Product Introduction：

    Waterproof:The whole sealing construction can prevent moisture from entering the inside of housing.

    Dust proof:The full sealed design will prevent the ingress of rain, dust and other foreign matter.

    Heat Dissipation:With efficient heat dissipation, the construction of headlight will be protected and its useful life will be extended.

     

    Fitment:

    Fitment:
    Toyota Corolla 1.8L 2011-2013
    Toyota Corolla 2.4L 2011-2013

    Position:
    Front+Left+Right

    Package Included:
    2 x Headlight Assembly

     

    Product Include：

    Front+Left+Right Headlight Assembly

     

    How To Replace A Headlight Assembly

    Safety tip: When replacing any part of the vehicle, you should take proper preventive measures, like wearing latex gloves and closed-toe shoes,

    Here are the simple tips to replace the headlight assembly

    1. Find the headlight assembly by opening the hood
    2. Make sure electrical connectors should be removed from the back end of the headlight assembly.
    3. You can remove the headlight assembly by removing the retainer or headlight mounting screws.
    4. Now, check for the damage in the headlight housing.
    5. Remove the headlight housing that is damaged from the header panel.
    6. Establish new headlight housings on the header panel. As needed, replace the destroyed mounting hardware
    7. Headlight assembly to be installed in the housing.
    8. Connect the wiring harness to headlight assembly.
    9. Remove any components that were damaged to reach the headlight housing.
    10. Next, Align the headlights.

    ​

    Adjust：
    Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
    1. 【Find the adjustment screws】Firstly, locate the adjustment screws on your vehicle.
    2. 【Adjust the headlights individually】The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
    3. 【Adjust the vertical field】The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
    4. 【Adjust the horizontal field】The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
    5. 【Test your results】

     

    Note

    1.Professional Installation is Highly Recommended.
    2.Installation Instruction is NOT Included.

    3.If you have any questions, please feel free to contact us in a timely manner.

     


    Item Specifics
    Brand everparstorecs
    Manufacturer Part Number 13105090
    Manufacturer Warranty 1 Year
    Type Headlight Assembly
    Placement on Vehicle Front Left Right
    Fitment Type Direct Replacement
    Mounting Style Screws
    Voltage 12 V
    Performance Part Yes
    Universal Fitment No
    Vintage Car Part No
    Headlight Style Projector
    Number of Pieces 2
    Interchange Part Number YAA-KLL-0174B
    OE/OEM Part Number YAA-KLL-0174B
    Superseded Part Number 2pcs of Headlamps Assembly
    Features Factory Headlights
    Bulbs Included No
    Mounting Hardware Included No
    Dust and Moisture Protection Yes
    Assembly Type Composite
    Lighting Technology LED
    Lens Color Clear
    Housing Color Black
    Housing Material PMMA
    Lens Material ABS Plastic
    Finish Smooth
    Mounting Hardware Included No
    Water Proof Yes
    Bulb Shape Code H1
    Bulb Shape Code 1 H7/D2H
    Components Included Lens and Housing
    Certifications DOT SAE

    Shipping

    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    Payment

    Any payments accepted by ebay also can be accepted.

    Service

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    Note

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.

    Shop Category
     Store Home
     lift support
     Condenser
     Air Diesel Heater
     Blower Resistor
     Blower Motor
     Heater Core
     Suspension Kits
     Thermostat Housing
     ABS Wheel Speed Sensor
     Window Switch
     Oxygen Sensor
     3Rd Brake Light
     Mass air flow sensor
     AC Compressor
     Cooling Fan
     Towing Mirrors
     Door Handle
     Radiator
     Sensor
     Knock Sensor
     Catalytic Converter
     Window Regulator
     Wheel Spacers
     Alternator
     Headlight Assembly
     Fuel Pump Assembly
     Leveling Lift Kits
     Spoiler Wing
     CV Axle
     Wheel Hub Bearing Knuckle
     Turbocharger
     Windshield Wiper Motor
     Engine Mount
     Head Gasket Set
     complete strut
     4 Pcs Wheel Hub Bearing
     Wheel Hub Bearing
     Tire Anti-skid Chain
     Brake caliper
     Shocks Struts
     Other

    LED Headlight Assembly Kit Lamp Pair Rear LH Right Fits 2011-2013 Toyota Corolla

    Feature:

    Brand-new high-quality products have been strictly inspected before leaving the factory. Comply with professional specifications and stable performance.

    1.All products have been strictly inspected, we want to create a perfect shopping experience for you.

    2.High quality lights.Safety and Durable.
    3.Condition: 100% Brand New and High Quality
    4.Material: ABS Plastic Housing / Polycarbonate Lens
    5.High grade ABS plastic. For toughness, impact resistance, and heat resistance.
    6.Plug and Play Operation, Direct Bolt-On OE Fitment or Replacement for the Stock Unit.
    7.Requires no Modification or Drilling.
    8.Brings a Different Appearance to Vehicle thats Great for Show Use or to Replace Old and Worn Headlights.

     

    Product Introduction：

    Waterproof:The whole sealing construction can prevent moisture from entering the inside of housing.

    Dust proof:The full sealed design will prevent the ingress of rain, dust and other foreign matter.

    Heat Dissipation:With efficient heat dissipation, the construction of headlight will be protected and its useful life will be extended.

     

    Fitment:

    Fitment:
    Toyota Corolla 1.8L 2011-2013
    Toyota Corolla 2.4L 2011-2013

    Position:
    Front+Left+Right

    Package Included:
    2 x Headlight Assembly

     

    Product Include：

    Front+Left+Right Headlight Assembly

     

    How To Replace A Headlight Assembly

    Safety tip: When replacing any part of the vehicle, you should take proper preventive measures, like wearing latex gloves and closed-toe shoes,

    Here are the simple tips to replace the headlight assembly

    1. Find the headlight assembly by opening the hood
    2. Make sure electrical connectors should be removed from the back end of the headlight assembly.
    3. You can remove the headlight assembly by removing the retainer or headlight mounting screws.
    4. Now, check for the damage in the headlight housing.
    5. Remove the headlight housing that is damaged from the header panel.
    6. Establish new headlight housings on the header panel. As needed, replace the destroyed mounting hardware
    7. Headlight assembly to be installed in the housing.
    8. Connect the wiring harness to headlight assembly.
    9. Remove any components that were damaged to reach the headlight housing.
    10. Next, Align the headlights.

    ​

    Adjust：
    Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
    1. 【Find the adjustment screws】Firstly, locate the adjustment screws on your vehicle.
    2. 【Adjust the headlights individually】The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
    3. 【Adjust the vertical field】The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
    4. 【Adjust the horizontal field】The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
    5. 【Test your results】

     

    Note

    1.Professional Installation is Highly Recommended.
    2.Installation Instruction is NOT Included.

    3.If you have any questions, please feel free to contact us in a timely manner.

     



    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    Any payments accepted by ebay also can be accepted.

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.