• Fitment
  • For 2013-2016 Dodge Dart L4 2.0L DOHC   Package including 1x Front Motor Mount-A5674 EM4239 3364 1x Rear Motor Mount-A5690 EM4203 3338
  •  
  • Core Functions of an Engine Mount
    • Secure and Support
        Anchors the heavy engine to the vehicle's frame, preventing excessive movement.
    • Absorb Vibration
        Uses elastic components (like rubber) to dampen the shakes produced by the running engine.
    • Reduce Noise
        Blocks vibrations from transferring into the cabin and steering wheel, improving comfort and quietness.
  •  
  • Signs You Need to Replace an Engine Mount

    • 2x Engine Motor Mount For Dodge Dart 2013-2016 L4 2.0L DOHC A5674 A5690

    Fitment

    For 2013-2016 Dodge Dart L4 2.0L DOHC
     
    Package including
    1x Front Motor Mount-A5674 EM4239 3364
    1x Rear Motor Mount-A5690 EM4203 3338

     

    Core Functions of an Engine Mount

    • Secure and Support

        Anchors the heavy engine to the vehicle's frame, preventing excessive movement.

    • Absorb Vibration

        Uses elastic components (like rubber) to dampen the shakes produced by the running engine.

    • Reduce Noise

        Blocks vibrations from transferring into the cabin and steering wheel, improving comfort and quietness.

     

    Signs You Need to Replace an Engine Mount

    • Excessive Vibration: Steering wheel and car body shake noticeably at idle

    • Loud Clunk: A "clunk" or "thud" from the engine bay when accelerating or braking

    • Engine Movement: Visibly see the engine rocking too much

    • Physical Damage: Rubber is cracked, collapsed, or leaking fluid

     

    Installation Steps

    • Prepare & Lift：Disconnect battery negative terminal. Use an engine support bar to hold the engine from the oil pan (place a wood block in between)

    • Remove Old Mount：Jack up the front of the vehicle slightly. Loosen and remove the bolts securing the engine mount

    • ​Replace Mount：Slowly lower the engine support until the old mount is loose. Remove the old mount and install the new one

    • Install & Tighten：Slightly raise the engine to align. Tighten all bolts to the specified torque

    • Finish Up：Remove the engine support and jack. Reconnect the battery

     

    Important Note

    • The engine is very heavy.Improper operation can cause serious injury or vehicle damage
    • If you lack experience, proper tools, and strength, it is highly recommended to have a professional mechanic do it
    • Always work on a flat, solid surface and use jack stands to support the vehicle. Never rely solely on a jack

     


    Item Specifics
    Brand everpartstorecs
    Manufacturer Part Number 13381722
    Manufacturer Warranty 1 Year
    Type Engine Mount
    OE/OEM Part Number EM4239 EM4203
    Item Height 5.63 inch
    Item Width 10.43 inch
    Item Length 11.50 inch
    Number in Pack 2
    Interchange Part Number A5674 A5690
    Custom Bundle No
    Superseded Part Number 3364 3338
    Fitment Type Direct Replacement
    Items Included 2x Motor Mount
    Universal Fitment No
    Mounting Style Bolt-On
    Mileage 30000 miles
    Mounting Hardware Included No
    Placement on Vehicle Front Rear
    Material Aluminum Rubber
    Performance Part No
    Vintage Part No
    Capacity 2.0L
    Finish Complete

    Shipping

    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    Payment

    Any payments accepted by ebay also can be accepted.

    Service

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    Note

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.

    Shop Category
     Store Home
     lift support
     Condenser
     Air Diesel Heater
     Blower Resistor
     Blower Motor
     Heater Core
     Suspension Kits
     Thermostat Housing
     ABS Wheel Speed Sensor
     Window Switch
     Oxygen Sensor
     3Rd Brake Light
     Mass air flow sensor
     AC Compressor
     Cooling Fan
     Towing Mirrors
     Door Handle
     Radiator
     Sensor
     Knock Sensor
     Catalytic Converter
     Window Regulator
     Wheel Spacers
     Alternator
     Headlight Assembly
     Fuel Pump Assembly
     Leveling Lift Kits
     Spoiler Wing
     CV Axle
     Wheel Hub Bearing Knuckle
     Turbocharger
     Windshield Wiper Motor
     Engine Mount
     Head Gasket Set
     complete strut
     4 Pcs Wheel Hub Bearing
     Wheel Hub Bearing
     Tire Anti-skid Chain
     Shocks Struts
     Other

    2x Engine Motor Mount For Dodge Dart 2013-2016 L4 2.0L DOHC A5674 A5690

    Fitment

    For 2013-2016 Dodge Dart L4 2.0L DOHC
     
    Package including
    1x Front Motor Mount-A5674 EM4239 3364
    1x Rear Motor Mount-A5690 EM4203 3338

     

    Core Functions of an Engine Mount

    • Secure and Support

        Anchors the heavy engine to the vehicle's frame, preventing excessive movement.

    • Absorb Vibration

        Uses elastic components (like rubber) to dampen the shakes produced by the running engine.

    • Reduce Noise

        Blocks vibrations from transferring into the cabin and steering wheel, improving comfort and quietness.

     

    Signs You Need to Replace an Engine Mount

    • Excessive Vibration: Steering wheel and car body shake noticeably at idle

    • Loud Clunk: A "clunk" or "thud" from the engine bay when accelerating or braking

    • Engine Movement: Visibly see the engine rocking too much

    • Physical Damage: Rubber is cracked, collapsed, or leaking fluid

     

    Installation Steps

    • Prepare & Lift：Disconnect battery negative terminal. Use an engine support bar to hold the engine from the oil pan (place a wood block in between)

    • Remove Old Mount：Jack up the front of the vehicle slightly. Loosen and remove the bolts securing the engine mount

    • ​Replace Mount：Slowly lower the engine support until the old mount is loose. Remove the old mount and install the new one

    • Install & Tighten：Slightly raise the engine to align. Tighten all bolts to the specified torque

    • Finish Up：Remove the engine support and jack. Reconnect the battery

     

    Important Note

    • The engine is very heavy.Improper operation can cause serious injury or vehicle damage
    • If you lack experience, proper tools, and strength, it is highly recommended to have a professional mechanic do it
    • Always work on a flat, solid surface and use jack stands to support the vehicle. Never rely solely on a jack

     



    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    Any payments accepted by ebay also can be accepted.

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.