Check out my Instagram "Neal.Design"  


Bostik Cleaner 4 is classed as a mild solvent cleaner for latex surfaces. 


it will remove grease and other contaminants without attacking the base material and has been predominately used in the manufacture of latex clothing Cleaning surfaces prior to application of the adhesive.

Cleaning of excess adhesive during manufacture 

BEWARE OF OTHER SELLERS OF THIS PRODUCT AS THEY MAY NOT BE GENUINE ! 


Used by the leading Latex clothing manufacturers 


LIBIDEX 


HOUSE OF HARLOT 


WESTWARD BOUND 


ATSUKO KUDO 


There are two types of adhesive that can be used with latex rubber sheeting:

Solvent based adhesives (rubber solution adhesives) and Water based adhesives (latex adhesives)


Solvent based adhesives dry quickly but the solvent can cause the latex to curl up. They are highly inflammable and must be used in well-ventilated work areas. They generate a good bond with good water resistance.


Latex adhesives are safe to use and do not cause curling up. They do however take longer to dry and may not stand up to immersion in water.


Preparation


1. Wipe away excess powder

2. Clean surfaces with Bostik cleaner 4, Use solvent sparingly because it will distort sheet but will flatten out when evaporated

3. Allow sheet to dry completely

4. Apply thin layer of adhesive to both surfaces

5. Allow the adhesive to dry completely and any distortion caused by solvent to disappear

6. Join the surfaces and apply slight pressure

7. Allow 24 hours for the bond to develop fully


I am happy to help buyers with questions on the use of this glue for latex clothing.

Adhesive Information


The rubber solution adhesive is a compound of natural rubber dissolved in petroleum solvents usually ethanol and methanol. Your local hardware shop will be able to offer you an appropriate solvent but please note that chlorinated solvents such as trichloroethylene should not be used because they will harm the rubber.

Please note this is genuine Bostik Cleaner / thinner No4 decanted from a 5ltr tin (the only size available to buy this product direct from the manufacturer) the label is therefore not