Advantage:
*Latest COB chip(USA) light source, 4 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*6000K White CHUSYYRAY light reflect road paint/signs better to show clearer road situation during night driving
*360 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
*Latest COB chip(USA) light source, 4 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*6000K White CHUSYYRAY light reflect road paint/signs better to show clearer road situation during night driving
*360 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
Headlight Bulbs Specifications:
● Bulb Socket: H7 high beam + H11 low beam
● Chip Type: 4pcs* COB Bridgelux chips (4-sides), 360 degree clear beam no blind zone
● Technology: Bulit in driver
● Operating Voltage: DC 9V ~ 32V , Fit for 12V & 24V vehicle.
● Wattage: 60W per bulb
● Luminous Flux: 12000 LM per set
● Color temperature: 6000K
● Light color: Cool White
● Material: Aviation 6063 aluminum profile
● Beam Angle: 360 degree
● Operating Temperature: -40-80 degree Celsius
● Waterproof Rate: IP67 rated Waterproof and dust seal, works well even in extreme weather
● Lifespan: over 50000 hours life time, stable quality and long service life
● Application: headlight high beam + low beam
● Built-in constant current CPU,instant full brightness without start-up relay
● Easy plug and play design, no resistor or modification needed.
● The bulb body size of our bulb is smaller than other 4-sided bulbs on the market, no need to worry about interference with the dust cover.
Package Included:
2pcs H7 Headlight High Beam Bulbs
2pcs H11 Headlight Low Beam Bulbs
2pcs H7 Headlight High Beam Bulbs
2pcs H11 Headlight Low Beam Bulbs
4pcs T10 LED Sidelight Bulbs
The box is sent randomly
The box is sent randomly
Note:
1. This kit is for vehicles with Factory Halogen Systems, it will not work with vehicles with Factory HID.Pls confirm the item if it can matches your car before you purchase.
2.This lisiting do not included bulb holders, some of the car need add bulb holder to get the LED bulbs replace the halogen bulbs
3. If there is an error on the onboard computer after installed LED light bulb on a car, please install a resistor or capacitor to eliminate the error message. This product does not come with an external resistor or capacitor.
2.This lisiting do not included bulb holders, some of the car need add bulb holder to get the LED bulbs replace the halogen bulbs
3. If there is an error on the onboard computer after installed LED light bulb on a car, please install a resistor or capacitor to eliminate the error message. This product does not come with an external resistor or capacitor.
4. Please contact us first before you leave a negative feedback, we will try our best to solve problem for you. Thanks.
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp