
400 Watts Solar Street lights Outdoor, 2 Set
Warm Tips:
1. Before the first use, please allow the solar panel to charge for 6-8 hours in full sunlight.
2. The charging efficiency of the solar panel depends on the weather conditions, the stronger the sunlight, the shorter the charging time, and the lighting time may be shortened in the case of long-term cloudy days (rainy days), which is a normal phenomenon.
3. The solar panel will be covered with dust when used outdoors for a long time. In order to get a better charging performance, it is recommended to clean up regularly.
4. Application: outdoor wall or pole in square, park, garden, courtyard, street, sidewalk, channel, farm, perimeter security, etc.

Remote Control
When using the remote control, you must face the lamp body directly
ON--Turn On The Light OFF--Turn Off The Light
●--100% Brightness ◐--30% Brightness
+--Brightness Increase - -- Brightness Redcctio
WiFi--Rader Sensor Mode
6H--6H 100% Brightness 4+4--4H 100% Brightness+4H motion sensor mode 8H--8H 100% Brightness
4+6--4H 100% Brightness+6H motion sensor mode 4+8--4H 100% Brightness+8H motion sensor mode

Battery: 3.2V/24000mAh
Solar Panel: 6V/20W
LED: 528pcs
Color Temperature: 6500K/Daylight White
Waterproof rank: IP67
Working temperature: (-49℃-185℃)
Material: ABS, Glass,Anti-rust Metal
Built-in Motion Sensor, Auto-on/Off Dusk to Dawn
Build-in Lithium Iron Phosphate Battery, High-temperature Resistance and Long Lifespan

No object movement detected,30% brightness
Object movement detected,100% brightness
Sensing distance:13-20ft/4-6M


Warm Tips:
To save the battery power,In order to maximize the lighting effect,please make sure the soar outdoor lights absorb adequate sunlight.It's important to install the solar panel in a location away from the shade caused by trees,buildings and etc.A install height of 13-20ft is remommended.
The light will not turn on in daytime or bright area,as solar panel has light sesor in it.Make sure the solar light charged by sufficient sunlight,then you can cover the solar panel with something,and then push the button to choose modes.Its sequence is off, press 3 seconds is on, then press 3 seconds is off again.