YOU WILL BE SENT A DESIGN PROOF WE DO NOT PRINT UNTIL YOU SAY SO

                               PLEASE CONFIRM YEAR MAKE AND MODEL IN ORDER DETAILS OR MESSAGE US 

This industrial-grade vinyl is reliable with 21 mil thickness and strong adhesion. It's a long-lasting solution that protects plastics, ideal for any heavy-duty application. Trusted by the pros, this product is designed to meet the rigorous standards of professional use.

Installation Instructions

Recommended Tools:

• Heat Gun

• Cleaning Solvent

• Shop Towels

• Squeegee

Installation Process:

1. Surface Preparation:

Before beginning installation, ensure all surfaces are thoroughly cleaned.

Adhesion performs best on clean, dry surfaces.

2. Fitment Check:

Verify that the graphics are properly aligned before removing the backing.

For easier alignment, peel back a small

portion of the backing from a corner and align it with the plastic surface.

3. Heat Application:

Use a heat gun to soften the material, making it more pliable for easier application, especially on challenging areas.

Take care not to overheat the graphic, as excessive heat may damage the adhesive.

Use the heat gun on any lifting edges to ensure proper fitment.

4. Curing Time:

Allow 72-96 hours for the adhesive to fully cure before subjecting the graphic to any stress or movement.

If you have any questions or concerns during the installation process, please do not hesitate to contact us.