Glow In The Dark Plastisol Ink For Screen Printing - Low Temp Cure 270F - 8 oz

Key Characteristics:

Low Temp Curing 270° F

Soft Hand Prints

Glow In The Dark

Universal for Variety of Fabrics

Bleed Resistant for Poly Blends

Non Phthalate

The ultimate Non-Phthalate plastisol ink. Rapid Cure the best solution for printing on polyester and blends. Our Rapid Cure series cures at a much lower temperature. This ink will help avoid dye migration and scorching your garment. Test your substrate first to make sure the ink work properly.

* For specialty glow ink we recommend printing on top of Rapid Cure White or Fluorescent Ink for best results

Curing:

Cure at 132° C/270° F

Flash at 82-104° C/180-200°F

Flash and Curing Guidelines:

Generally it will take 5-10 washes to fully test the cure, but if the ink is seriously under-cured, the print will show deterioration after only 1-3 washings washes. Another way to test your print quickly is doing the “Stretch Test” stretch the print roughly 2/3 of the T-Shirt; if the print cracks and does not retract back it means you under-cured.

General Testing:

Before you do any large print, we recommend doing a stretch test and a wash test to ensure you cured and printed correctly before going into production. Increase cure time if testing fails. We recommend only using natural fibers best results will be seen on 100% cotton.

Clean Up:

On the press: Ecotex Plastisol Press Wash/Ink Degradant

In the sink: Ecotex Plastisol Screen Wash/Ink Degradant

✔️Pro Tips: Plastisol inks do not dye fabric like the traditional inks. Plastisol inks wraps around the fibers and makes a mechanical bond with the fabric. Store plastisol inks at room temperature. Prolonged exposure to temperatures above 90º F (32º C) can cause the ink to start to cure while it's still in the container.

We highly recommend printing with an under base white when printing on a dark garment.

Thank you for looking!