Oil Pump Block-off Kit

36-005

Block off kits are ONLY for carbureted applications. It is not possible to pre-mix a fuel injected ski, as the injectors will clog.
Fits: Sea-Doo 587, 657/X, 717, Yamaha 800,1100, 1200(all), Kawasaki 900, 1100, Polaris (all), Tigershark 900, 1000.

The following is a general guide covering most PWC models.

First, remove the oil pump. With the pump removed, you have to cover the hole where the oil pump was; you do this with a block off plate.
Install the plate with the gasket, o-ring or silicone to seal it (whichever was OE).
Next, block off the oil feed lines (these are the lines that run from the oil pump to the intake manifold/carbs/flame arrestor). There are a couple ways to do this. First you could leave the lines attached to the manifold, cut the lines and put screws in the end with a cable tie. Second you could use the little block off caps that may come with the plate.
Remember you just got rid of your oil pump and put oil in the fuel, but you do not have premix fuel in the fuel lines. It’s a good idea to squirt some oil down the carburetors then start the watercraft on the flush kit and let it idle for about 15 minutes. This allows the un-mixed fuel to clear the lines.

Usually Ships within 48 hours of payment

We carry various parts available, including seat covers, traction mats,

These are in stock and ready to ship

USE WHAT THE PRO'S USE
The item is ready to install

These are in stock and ready to ship

Check out our other items

We have listed or can get what you need to get you PWC back on the water...

PLEASE NOTE YOUR MAKE AND MODEL UPON CHECK OUT

TO ASSURE YOU GET THE CORRECT ITEM

Please see photos

for all included

International shipping is also available.

We use USPS and rarely have problems however we cannot accept responsibility for lost packages, hold ups at customs which can happen and would ask you to check with them first,

or any other circumstances that can happen with international shipping.

We can and will ship via USPS international and rarely have problems
however we cannot accept responsibility for lost packages,
hold ups at customs,
or any other unforseen circumstances that can happen with international shipping.
with that being said lets do business!!!

The item is ready to install

Please verify this before ordering.

All returns/exchanges will be subject to a 20% restock fee.

They are in stock and usually ship within 24 hours

Please see photos

for all included

Please allow 2-3 business days for handling.

Ships FREE AND FULLY insured!!!

APO, AE, HI, AK, PR, MH and international shipping rates apply!!

If you live in any of these locations, email me about shipping cost BEFORE placing a bid. Thanks!

Returns are accepted for 14 days from receipt of purchase except for AS-IS items. AS-IS sales are FINAL with NO RETURNS. Please read our return policy for specific details. Purchases will NOT be marked as a gift. All international buyers are responsible for paying their countries tariffs and taxes.

Oil Pump Block-off Kit

Usually Ships within 48 hours of payment

USE WHAT THE PRO'S USE The item is ready to install

USE WHAT THE PRO'S USE
The item is ready to install