Product Description:

1. Ultra-Bright Lighting: Equipped with high-lumen LED chips, these bulbs produce a intense, white light (6000K) that significantly improves visibility for high beams, low beams, and fog lights, ensuring a safer drive in all conditions.

2. Enhanced Durability: Built with rugged, aerospace-grade aluminum housing and efficient heat dissipation technology, the bulbs maintain optimal performance and prevent overheating, extending their lifespan to over 50,000 hours.

3. Easy Plug-and-Play Installation: Designed to fit original factory sockets, these bulbs require no modifications or extra wiring. Simply replace your existing halogen bulbs and enjoy instant LED performance.

4. Wide Compatibility: The 9005/HB3, H11, and H16 bulbs are compatible with a vast range of vehicle makes and models, making them a versatile lighting solution for cars, trucks, and SUVs.

5. Energy-Efficient Operation: Consuming less power than traditional halogen bulbs while delivering brighter light, these LEDs reduce load on your vehicle’s electrical system and contribute to better fuel efficiency.

---

Attributes:

• Bulb Types: 9005/HB3 (high beam), H11 (low beam), H16 (fog light)

• Light Color: Pure white (6000K)

• Lumen Output: High beam: 10,000LM per pair; Low beam: 9,000LM per pair; Fog light: 4,000LM per pair

• Power Consumption: 72W per bulb (high/low beam), 50W per bulb (fog light)

• Operating Voltage: DC 12V-24V

• Certification: IP67 waterproof rating, EMC anti-interference certification

• Heat Management: Advanced copper base and cooling fan design for optimal thermal control

• Material: High-quality LED chips, aluminum body, tempered glass lens

• Beam Pattern: Precise focus for clear cutoff, preventing glare for oncoming drivers

• Lifespan: Up to 50,000 hours

• Operating Temperature: -40°C to 80°C (-40°F to 176°F)

---

Package Includes:

• 2 x 9005/HB3 High Beam LED Bulbs

• 2 x H11 Low Beam LED Bulbs

• 2 x H16 Fog Light LED Bulbs

---

Advantages of LED over Halogen Bulbs:

• Brighter Light: LEDs produce a much higher lumen output than halogen bulbs, resulting in a whiter, broader, and longer beam pattern that dramatically improves nighttime visibility and reduces eye strain.

• Energy Efficiency: LEDs consume up to 50% less power, reducing the burden on your vehicle's alternator and electrical system.

• Longer Lifespan: With a lifespan of up to 50,000 hours, LEDs vastly outperform short-lived halogen bulbs (typically 1,000 hours), meaning you may never need to replace them again.

• Instant On: LEDs achieve full brightness immediately upon turning on, with no warm-up delay, unlike halogens which require a moment to reach full intensity.

• Durability: LED bulbs are solid-state lighting devices with no fragile filaments, making them highly resistant to vibrations and impacts from rough roads.

---

Installation Steps:

1. Vehicle Preparation: Ensure the vehicle engine is off and the headlight/fog light switches are in the "OFF" position. Open the hood and allow the existing halogen bulbs to cool down if they were recently used.

2. Access the Bulb Housing: Locate the back of the headlight or fog light assembly. Remove the dust cover/access cap to reveal the rear of the bulb holder.

3. Remove Old Bulb: Disconnect the power connector from the halogen bulb. Release the metal or plastic clip that secures the bulb in place, then carefully remove the halogen bulb from the housing.

4. Install LED Bulb: Take the new LED bulb and insert it into the housing, ensuring the LED chips are positioned correctly (typically facing left and right for optimal beam pattern). Secure it with the retention clip. Connect the LED bulb's driver to the original vehicle's power connector.

5. Manage Components: Neatly place and secure the ballast/driver box and any extra wiring in the engine bay using zip ties (provided), ensuring they are away from moving parts or extreme heat sources.

6. Seal and Test: Carefully put the dust cover back on. It may be necessary to route the wiring through the cover or use the provided extension cap. Turn on your vehicle's lights to test all functions (low beam, high beam, fog lights) and ensure they are working correctly. Adjust the beam alignment if necessary.