Link CAN Keypad 8 button

Product Description:

Rugged 8 key CAN Keypad with interchangeable 15mm inserts (sold separately).

Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups.
The keypad is designed for ultimate reliability - IP67/IP69K water and dust resistant, -40 to +70 operating temperature range, UV 400hrs, salt spray resistant and switches rated to 3 million operations.
Can be installed both inside and outside, perfect for street, track and off-road use. 

Note: Keypad ships with empty button inserts, inserts need to be selected and purchased individually. 1 x Link ECU Logo Button Insert included in box loose.

 

Features:

• CAN Configurable with G4X PC Link – Change LED backlight, individual button indicator ring colour, programmable to show change in status, flashing option, multiple modes including momentary, latched and toggle.
• Customizable Button Inserts – The replacement system for individual inserts makes modifying the keypad layout simple and economical.
• IP67/IP69K Waterproof rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour. The IP69K rating provides protection against high pressure water at high temperature spray downs.
• Compatible with all G4X ECU’s. Built-in support from G4X PC Link vers 6.22 onwards

Box Contents:
1 x 8 Button CAN Keypad
1 x DTM4 Mating Connector Kit
1 x Link Sticker
1 x Keypad Button Insert – Link Logo

Specifications:

Connector - DTM4 Connector for CAN and Power (Black = Ground, Red = Power, White = CAN High, Blue = CAN Low)
Switch Life - 3 million operations
CANopen Node ID – 0x15 (21)
Default Baud Rate - 1000kbit/s
Ingress protection Rating – IP67/IP69K
Chemical Resistance - Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic Acid
UV Protection - UVB 400 hours
Salt Spray Per - ASTMB117
Dimensions – 123.5mm (W) x 70mm (H)

Mounting Specs:
Mounting Stud Gap (Centre to Centre) 78mm
Nuts thread: #10-32
Maximum torque: 0.8Nm

• Manufacturer: Link Engine Management

  This Item is a brand new in the box product. It is made from the highest quality materials and made to the highest standards.

  Link Engine Management Ltd – Limited Lifetime Warranty

  This Limited Lifetime Warranty applies to all Engine Control Units (ECUs), Power Distribution Modules (PDMs), DI-Drivers, and CAN-Lambda modules (“Products”) manufactured by Link Engine Management Ltd.

  WARRANTY COVERAGE

  Link Engine Management Ltd warrants that its Products are free from defects in materials and workmanship under normal use and installation, for the lifetime of the Product, subject to the limitations outlined below. This warranty applies only to the original purchaser of the Product and is non-transferable.

  If a defect arises and a valid claim is received, Link Engine Management Ltd will, at its sole discretion:

  • repair the defective Product, or
  • replace it with a new or refurbished Product of comparable function.

  If a Product is found to be defective, it must be returned to the original place of purchase along with proof of purchase. Any repaired or replaced Product is covered only for the remainder of the original warranty period.

  WARRANTY EXCLUSIONS

  This warranty does not cover:

  • Products that have been damaged or impaired due to incorrect installation, misuse, neglect, accident, or external causes,
  • Normal wear and tear or cosmetic damage,
  • Products that have been modified or used with incompatible software or components,
  • Are installed in highway-registered vehicles (Products are intended for off-road use only).

  
  

  WHAT can be returned?

  Not all items are subject to our standard returns policy. Items that are special order are subject to a return policy outline between JDM Mods NQ and the customer at time of purchase.

  Once a product has been test fitted, installed or used it can no longer be returned.

  Special order items from overseas or special order will be accepted for return but a 20% restocking fee will be applied 

  1. WHAT can be returned?

     Not all items are subject to our standard returns policy. Items that are special order are subject to a return policy outline between JDM Mods NQ and the customer at time of purchase.

     Once a product has been test fitted, installed or used it can no longer be returned.

      Special order items from overseas or special order will be accepted for return but a 20% restocking fee will be applied 

      JDM Mods NQ Returns Policy:

     Returns for this product are accepted only due to the product being faulty from a manufacturing issue and will not be accepted for any other reason.

     All returns will be less the original or "Free Freight" cost of the original shipping. Any returns other than a faulty product will also incur a 10% restocking fee.

     The return period for any of the above is 30 days only. All returned products must be returned in a re-sellable condition and will be thoroughly inspected before any sort of refund is issued. Items not meeting this standard will be returned at the BUYERS expense.

      THESE TERMS & CONDITIONS ARE FINAL!

      All LINK products are thoroughly inspected and packaged with the greatest care before shipping.

      Please note the free shipping of 3-6 business days. WE ARE located in Townsville North QLD, it takes 3 days to Brisbane, 3-6 to NSW, ACT & VIC, 6-10 TAS & SA and 10-14 WA & NT for free freight! Most products come with a freight charge now but please be aware of that when taking the free freight option which is just standard slow freight.

     Express freight is available in the postage section for an extra cost.

     International freight is also available in Standard and Express which is calculated by eBay.

     ALL OUR FREIGHT IS THROUGH AUSTRALIA POST AND SOME OTHER CARRIERS FOR LARGER/BULKY ITEMS.