Link TCC04 4 Channel EGT to CAN Module

Product Description:

Link TCC04 4 Channel EGT to CAN module, powered by CANchecked 

The TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples and send the values via CAN bus and/or monitor them directly on your wireless enabled device. 

Type-K thermocouples are suitable for various applications such as measuring exhaust gas temperature (EGT), temperatures before/after the intercooler, turbo housings, cylinder head temperatures, water temperature, oil temperature and more. All measurements are cold junction compensated with a measuring range of 0 to 1250°C in 0.25°C resolution (14bit). 

The TCC04 feature a four-pin DTM connector for CAN & power that is pin compatible with Links standard CAN pinout and CAN cables range. CAN 2.0A/B standard is supported with flexible configuration.  

Wireless connectivity allows you to configure and update your module via smartphone or PC and query the current temperature and thermocouple status. 

Features: 
-    4 x cold junction compensated type-K inputs     
-    CAN Bus connection to ECU (Pre-Configured for Link ECU)     
-    Measuring range from 0 to 1250°C (32 to 2282°F) with 0.25°C resolution     
-    Detection of short circuit to ground or if no type-K is connected     
-    Standard mini k thermocouple connector     
-    Full configuration and monitoring over wireless   
-    Adjustable sample frequency up to 100Hz

Box Contents:  
1 x CAN EGT Module     
1 x DTM4 Mating Connector Kit      
2 x Link Stickers

Technical Specifications:

• DTM 4 CAN Pinout (Supports Links CAN pinout schema and CAN cables range)
• Pin 1: 12V Pin 2: Ground Pin 3: Can Low Pin 4: Can High
• Accuracy: maximum 2% deviation
• Dimension (L x W x H) – 97.3 x 31.5 x 34.6mm

Configuration Options:

The module can be configured via wireless:

• Can Speed: 125kbps, 250kbps, 500kbps, 1Mbps
• Emulation: Standard, All major aftermarket EGT/Thermocouple to CAN Modules
• Change of standard Can Bus ID
• Change Big/Little Endian

• Manufacturer: Link Engine Management

  This Item is a brand new in the box product. It is made from the highest quality materials and made to the highest standards.

  Link Engine Management Ltd – Limited Lifetime Warranty

  This Limited Lifetime Warranty applies to all Engine Control Units (ECUs), Power Distribution Modules (PDMs), DI-Drivers, and CAN-Lambda modules (“Products”) manufactured by Link Engine Management Ltd.

  WARRANTY COVERAGE

  Link Engine Management Ltd warrants that its Products are free from defects in materials and workmanship under normal use and installation, for the lifetime of the Product, subject to the limitations outlined below. This warranty applies only to the original purchaser of the Product and is non-transferable.

  If a defect arises and a valid claim is received, Link Engine Management Ltd will, at its sole discretion:

  • repair the defective Product, or
  • replace it with a new or refurbished Product of comparable function.

  If a Product is found to be defective, it must be returned to the original place of purchase along with proof of purchase. Any repaired or replaced Product is covered only for the remainder of the original warranty period.

  WARRANTY EXCLUSIONS

  This warranty does not cover:

  • Products that have been damaged or impaired due to incorrect installation, misuse, neglect, accident, or external causes,
  • Normal wear and tear or cosmetic damage,
  • Products that have been modified or used with incompatible software or components,
  • Are installed in highway-registered vehicles (Products are intended for off-road use only).

  
  

  WHAT can be returned?

  Not all items are subject to our standard returns policy. Items that are special order are subject to a return policy outline between JDM Mods NQ and the customer at time of purchase.

  Once a product has been test fitted, installed or used it can no longer be returned.

  Special order items from overseas or special order will be accepted for return but a 20% restocking fee will be applied 

  1. WHAT can be returned?

     Not all items are subject to our standard returns policy. Items that are special order are subject to a return policy outline between JDM Mods NQ and the customer at time of purchase.

     Once a product has been test fitted, installed or used it can no longer be returned.

      Special order items from overseas or special order will be accepted for return but a 20% restocking fee will be applied 

      JDM Mods NQ Returns Policy:

     Returns for this product are accepted only due to the product being faulty from a manufacturing issue and will not be accepted for any other reason.

     All returns will be less the original or "Free Freight" cost of the original shipping. Any returns other than a faulty product will also incur a 10% restocking fee.

     The return period for any of the above is 30 days only. All returned products must be returned in a re-sellable condition and will be thoroughly inspected before any sort of refund is issued. Items not meeting this standard will be returned at the BUYERS expense.

      THESE TERMS & CONDITIONS ARE FINAL!

      All LINK products are thoroughly inspected and packaged with the greatest care before shipping.

      Please note the free shipping of 3-6 business days. WE ARE located in Townsville North QLD, it takes 3 days to Brisbane, 3-6 to NSW, ACT & VIC, 6-10 TAS & SA and 10-14 WA & NT for free freight! Most products come with a freight charge now but please be aware of that when taking the free freight option which is just standard slow freight.

     Express freight is available in the postage section for an extra cost.

     International freight is also available in Standard and Express which is calculated by eBay.

     ALL OUR FREIGHT IS THROUGH AUSTRALIA POST AND SOME OTHER CARRIERS FOR LARGER/BULKY ITEMS.