Radium Top Feed Conversion Fuel Rail - Nissan Skyline R33 (RB25DET)

Product Description:

This fuel rail is for the Nissan RB25DET (non NEO) engine ONLY. This is commonly found in the R33 Skyline among others.

Manufactured with a large 0.69" internal bore, the fuel rail can support all any engine power requirements. The Radium fuel rail converts the OEM side feed fuel injector setup to top feed injectors, allowing the use of a wide variety of aftermarket fuel injectors available on the market. This kit is compatible with E85.

The fuel rail has four 8AN ORB ports that can be used for fuel inlet, outlet or for plumbing option accessories. All unused ports must be plugged. The rail is extruded and CNC machined from solid 6063 aluminium and black anodized for a high quality surface finish. The green injector seats press into the intake manifold and provide a sealed base for the top feed fuel injectors to sit on. These injector seats require fuel injectors with a 14mm lower O-ring (common size).

Kit Includes:

• Black Anodized Aluminum Fuel Rail
• Phenolic Mounting Bolt Spacers, Short (x3)
• Phenolic Mounting Bolt Spacers, Tall (x3)
• Phenolic Mounting Bolt Washers (x3)
• Radium 20-0161-06, 25mm Injector Seats
• Stainless Steel Mounting Bolts, Short (x3)
• Stainless Steel Mounting Bolts, Tall (x3)

Fuel Injector Compatibility:
The kit includes 2 sets of phenolic spacers (shown above in the kit contents) to suit multiple height injectors. The spacers are machined from phenolic material and offer excellent resistance to heat transfer.

Use the tall spacers and longer mounting bolts to accommodate this size injector:

Below are some of the many fuel injectors that are a direct fitment with this Radium fuel rail kit using the tall spacers:

Injector Dynamics ID725-48-14-14
Injector Dynamics ID850-48-14-14
Injector Dynamics ID1000-48-14-14
Injector Dynamics ID1050x-48-14-14
Injector Dynamics ID1300-48-14-14
Injector Dynamics ID1700-48-14-14
Injector Dynamics ID2000-48-14-14

Use the shorter spacers and mounting bolts to accommodate this size injector:

Below are some of the many fuel injectors that are a direct fitment with this Radium fuel rail kit using the short spacers:

• Injector Dynamics ID850-34-14-14
• Injector Dynamics ID1050x-34-14-14
• Injector Dynamics ID1300-34-14-14
• Injector Dynamics ID1700-34-14-14
• Injector Dynamics ID2000-34-14-14

NOTE: Fuel Injectors are NOT included and must be purchased elsewhere.

To reuse the factory fuel pressure regulator, select part number 20-0303

• Manufacturer: Radium Engineering

  This Item is a brand new in the box product. It is made from the highest quality materials and made to the highest standards.

  RADIUM ENGINEERING WARRANTY

  All Radium Engineering brand products are subject to a 1 Year Limited Warranty from the date of original purchase. If a product fails, it will be repaired or replaced at Radium Engineering’s option when it has been determined by Radium Engineering to have failed due to defects in materials or workmanship. Warranty claims must be made by the original purchaser. If the purchase was made from a retailer other than radiumauto.com, please contact the place of purchase for further assistance.

  
  

  WHAT can be returned?

  Not all items are subject to our standard returns policy. Items that are special order are subject to a return policy outline between JDM Mods NQ and the customer at time of purchase.

  Once a product has been test fitted, installed or used it can no longer be returned.

  Special order items from overseas or special order will be accepted for return but a 20% restocking fee will be applied 

  1. WHAT can be returned?

     Not all items are subject to our standard returns policy. Items that are special order are subject to a return policy outline between JDM Mods NQ and the customer at time of purchase.

     Once a product has been test fitted, installed or used it can no longer be returned.

      Special order items from overseas or special order will be accepted for return but a 20% restocking fee will be applied 

      JDM Mods NQ Returns Policy:

     Returns for this product are accepted only due to the product being faulty from a manufacturing issue and will not be accepted for any other reason.

     All returns will be less the original or "Free Freight" cost of the original shipping. Any returns other than a faulty product will also incur a 10% restocking fee.

     The return period for any of the above is 30 days only. All returned products must be returned in a re-sellable condition and will be thoroughly inspected before any sort of refund is issued. Items not meeting this standard will be returned at the BUYERS expense.

      THESE TERMS & CONDITIONS ARE FINAL!

      All Radium products are thoroughly inspected and packaged with the greatest care before shipping.

      Please note the free shipping of 3-6 business days. WE ARE located in Townsville North QLD, it takes 3 days to Brisbane, 3-6 to NSW, ACT & VIC, 6-10 TAS & SA and 10-14 WA & NT for free freight! Most products come with a freight charge now but please be aware of that when taking the free freight option which is just standard slow freight.

     Express freight is available in the postage section for an extra cost.

     International freight is also available in Standard and Express which is calculated by eBay.

     ALL OUR FREIGHT IS THROUGH AUSTRALIA POST AND SOME OTHER CARRIERS FOR LARGER/BULKY ITEMS.