This listing compatible with 3 pairs (9005+9006+H11) 6000K white super bright headlight high/low beam + fog light bulbs conversion kit.
Headlight Bulbs Specifications:
Bulb Socket: 9005/HB3 high beam + 9006/HB4 low beam
Chip Type: High Powe CSP Chips
Luminous Flux: 20000LM/set (10000LM/bulb)
Operating Voltage: DC 9-32V
Operating Voltage: DC 9-32V
Power: 100W/bulb
Material: Space AluminumLighting: white light
Color temperature: 6000K
Beam Angle: 360 degree
Operating Temperature: -40 - +80 degree Celsius
Waterproof Rate: IP67 rated Waterproof and dust seal, works well even in extreme weather
Lifespan: over 50000 hours life time, stable quality and long service life
Application: headlight high beam + low beam
Built-in constant current CPU,instant full brightness without start-up relay
Easy plug and play design, no resistor or modification needed.
Fog Light Bulbs Specifications:
Lamp holder: H11
Color temperature: 6000K
Bulb Size: H11/H8/H16
Chip Type: 4 sides COB Chips
Luminous Flux: 8000LM/set (4000LM/bulb)
Operating Voltage: DC 12-24V
Operating Voltage: DC 12-24V
Power:40W/bulb
Lighting: White 6000KLamp holder: H11
Color temperature: 6000K
Appearance color: black
Uses: fog light
Uses: fog light
Package includes:
2x 9005 Headlight High Beam Bulbs
2x 9006 Headlight Low Beam Bulbs
2x H11 Fog Light Bulbs
New and old packaging will be shipped randomly
Features：
☆100% brand new/never used and well packaged retail box
☆The model is the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required Energy saving, environmental protection, Stable performance, through strict test,safer driving in the car
☆ High-quality aluminum heat dissipation ensures a safe temperature range
☆Built-In Cooling Fans ,Smart Efficient Cooling System Fast Heat Dissipation temperature range
☆White light reflect road paint/signs better to show clearer road situation during night driving
☆Mini ultra-light design, as much as possible to restore the original size of the car, adapt to all models, plug and play. High efficiency CSP light source, low energy consumption and high brightness.
☆The light effect boundary is clear, and there is no stray or glaring light, which has made a great contribution to the safety of the driver.
☆Operating Temperature: -40°C ~ +80°C
☆Shockproof and durable for up to 50,000 hours
☆100% brand new/never used and well packaged retail box
☆The model is the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required Energy saving, environmental protection, Stable performance, through strict test,safer driving in the car
☆ High-quality aluminum heat dissipation ensures a safe temperature range
☆Built-In Cooling Fans ,Smart Efficient Cooling System Fast Heat Dissipation temperature range
☆White light reflect road paint/signs better to show clearer road situation during night driving
☆Mini ultra-light design, as much as possible to restore the original size of the car, adapt to all models, plug and play. High efficiency CSP light source, low energy consumption and high brightness.
☆The light effect boundary is clear, and there is no stray or glaring light, which has made a great contribution to the safety of the driver.
☆Operating Temperature: -40°C ~ +80°C
☆Shockproof and durable for up to 50,000 hours
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp
Contact Us:
If the product is not suitable or there is a quality problem, please contact our customer service directly to solve the problem. We will give you a satisfactory solution.
If the product is not suitable or there is a quality problem, please contact our customer service directly to solve the problem. We will give you a satisfactory solution.