★Thank you for purchasing our product!
★If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
Bulb Size: 9005+H11+H11
Light Mode: Single Beam
Usage: Headlights or Foglights
Wattage: 120W/set (60W/bulb)
Luminous Flux:20000LM/set (10000LM/bulb)
Color Temperature: White 6500K
Lifespan: 50,000 hours
Certification: IP68 Water and Dust Seal
Voltage: DC 9-18V
Light source: CSP (3570)
Certified by: CE & ROHs
Warranty: 2 Years
Lifetime: More than 50000 hours
Placement on Vehicle: Front
Suitable For Pickup, Wagon, UTB, Cab, ATV, SUV, Jeep, Truck, Bus etc.
Features:
*Perfect Size
led bulb uses a 1:1 halogen beam design and ultra-thin chip copper plate to ensure a perfect beam pattern and will not turn a blind eye to oncoming vehicles and drivers.
*Higher brightness than halogen lamp
These LED bulbs with 6,500K white light are 200% brighter than the original halogen bulbs.
Increase downroad visibility with no added glare, perfect for bulbs replacement.
*Effecient heat dissipation
The heat sink design with an aviation aluminum body and hollow carve can effectively dissipate heat through air convection.
*Easy installation
No Polarity, Wireless and Fanless design, same structure design as halogen bulb, just Plug & Play.
*Waterproof IP68
The Whole aviation aluminum body and IP68 waterproof rate keep the bulbs working on rainy days or other extreme conditions.
Package Included:
6x 9005+H11+H11 LED Bulbs
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.a
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.