Selling Point:
-Good light type, Low power consumption and super bright lighting,the position of the light-emitting point is close to the original car halogen lamp
-No delay to light up, Faster on/off response time, low power consumption and high lighting,Good Quality And Durable,Easy to Install,Good Feel
-Lifespan: Up to 30,000 hours working hours ,Adopt imported chips emit 360 degree light can light up every corner, stable quality, long service life
-The model is as the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required A direct replacement part that easy to install
-With High-purity brightness, strong penetrability and superior stability,Energy saving, environmental protection, through strict test, Use safer driving in the car,highly recommended.
Specifications：
★Plug Type: 9012
★Latest series：V13 Super white
★Product appearance：golden
★LED Quantity(each bulb): Brand AQJ LED chips
★Operating Voltage: DC 9-32V(fit 12V/24V vehicle)
★Color Temperature: Cool White 6000K-8000K
★IP65 water and dust seal,360 degree beam angle
★Operating Temperature: -40-80 degree Celsius
★Material: aviation 6063 aluminum profile
★Over 60,000 hours life time
Voltage: DC 12V-24V
Warranty：5 YEARS
Material：Aluminum
Lifetime:More than 30000 hours
Placement on Vehicle：Front,Left, Right
Applicable Used as a: Headlight
Suitable For Pickup, Wagon, UTB, Cab, ATV, SUV, Jeep, Truck, Bus etc.
Package: 2x 9012 LED Headlight Light Bulb
New boxes and old boxes are sent randomly
Attention:
LED bulb is low power device, the following issues may occur if you want to use LED bulb on some European vehicles: Hyper Flashing, No Flashing, or Error Code. Those are NOT problems of LED bulb and NOT covered by warranty. You may simply add a set of load resistor (NOT included) to avoid those issues.can be solved with a decoder (decoder must be purchased separately
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
On Mar 29, 2025 at 21:04:38 PDT, seller added the following information: