Beovision 7 - 40 VESA bracket

This VESA bracket / plate is specially designed to mount on a floor stand, wall holder or table stand from the Beovision 7 - 40 series.

How to attach the VESA bracket

Remove the current B&O TV by loosening 2 screws. Mount the VESA 200/300 adapter (bracket) on your TV and then mount the plate with the TV on the stand.

How to choose the right VESA plate - click here

How to install the VESA plate on the BV 7-40 stand - click here

What are the dimensions of the VESA plate / bracket for the Beovision 7 stand

• The VESA plate has both 200 mm and 300 mm hole spacing in width
   
• It has holes designed for 6 mm screws (M6) and 8 mm screws (M8) for fastening to your TV.
   
• The VESA plate also has a distance of 350 mm in height with steps of 25 mm, so that the height can be adjusted.
   
• The product is prepared for mounting the Neo 7 Adapter, where holes have been prepared.
   
• A bag is included with 4 pcs M6 screws (6 mm), 4 pcs M8 screws (8 mm), 4 pcs spacers of 10 mm for mounting between the TV and the plate and 2 pcs M5 (5 mm) screws for mounting the Neo 7 Adapter on the VESA plate. Also 2 pcs M5 screws to attach the VESA plate to the stand.
   
• The VESA plate has 200 mm and 300 mm hole spacing on the side and has holes intended for 6 mm screws (M6) and 8 mm screws (M8) on your TV. Samsung uses 8 mm screws.
   
• The VESA mount also has a height distance of 350 mm, where the hole distance jumps by 25 mm.