SERIES 4 ROTARY VANE PUMP CLAMP-ON STYLE "B" MOUNTING 1/2" NPT PORTS

  • Consistent flow rate across variable pressures
  • Self-priming (water) and maintenance-free with low vibration and pulsation characteristics
  • No Relief Valve
  • Brass Housing Material
  • NPT 1/2" Inlet and Outlet Connections
  • Constructed with EPDM/Nitrile Elastomers
  • Flowrate of 330GPH (1000LPH)*
  • Fluid Operating Temperature of between -4°F to 160°F (-20°C to 71°C)
  • Maximum Mechanical Horsepower required 1.22hp (909W)¹
  • * GPH rating at 1725RPM/60Hz and LPH rating at 1450RPM/50Hz¹ Mechanical Horsepower requirement based on pump tested with water at room temperature and maximum operating pressure 250psi (17.5BAR)

Technical Information
Body Material:Brass
Port Size:1/2" NPT
Mounting Type:Clamp-On
Drive Configuration:Slotted With Bronze Coupling 1143
Flow Rate:330 GPH / 1000 LPH
Elastomer:EPDM / NBR
Seal Type:Non Balances Ceramic / Carbon
Rotation:Clockwise
Internal Component Material:Carbon
Valve Type:N/A
Valve Configuration:No Relief Valve

 

Operating Range
Maximum Mechanical Power Requirement:1.22hp (909W)
Maximum Operating Pressure:250 PSI
Relief Valve Set Pressure Range:N/A
Max Static Pressure PSI:100 PSI
Operation Fluid Temperature Range:-4°F (-20°C) - 160°F (71°C)
Max Fluid Viscosity:100 cP
Max Sound Level:60dB(a)
Max Discharge Pressure:250 PSI
Min/Max Speed:1000 - 2400 RPM
Dry Suction Lift:3.3 ft
Wet Suction Lift:6.6 ft
Fluid Acidity:6 pH
Maximum Total Dissolved Solids (TDS):5000 ppm