Description
This Battery Capacity Tester Is an Electronic Load with a Charging Function. It Is Suitable for Charging and Discharging Capacitance Testing of Various Batteries. This Item Can Also Be Connected to a Computer and Enables More Extended Functions Through Online Software.
Key Features
Lcd Display: This Tester Has an Lcd Display on the Front to Show Test Data Such As Voltage, Current, Capacity, Time, Power, and Energy. This Allows You to Observe the Data at All Times.
4-Wire Connection: the Tester Uses 4-Wire Detection. the Voltage and Current Channels Are Wired Separately, Which Ensures More Accurate Measurements.
Strong Durability: This Item Is Made of High-quality Metal with a Fine Polished Surface, Which Is Very Strong and Durable, and Has a Long Service Life.
3 Discharge Modes: This Item Is Available in Three Discharge Modes, Which Are Dsc-cc, Dsc-cp, and Chg-cv for Testing Battery Capacity, Simulating Constant Power Devices, and Battery Measurement Respectively.
Automatic Charging and Discharging: This Item Supports an Automatic Charge-discharge-charge Mode, Which Can Be Used to Test the Battery Capacity. This Is Very Convenient and Effective.
Pc-connectable: You Can Connect Your Computer with a Specific Usb and Use the Software to Plot Curves, Calibrate Benchmark Tests, Observe Measurement Results, Etc.
High Accuracy: This Item Tests Very Accurately with a ±0.5 Error Range. Such High Testing Accuracy Will Lead to More Accurate Results.
Multiple Charging Materials: It Supports Nimh, Nicr, Lithium, Iron, Lithium, and Lead Acid Charging Materials. This Is Very Convenient.
Guaranteed Customer Service: We Aim to Provide Quality Products and Services. If You Have Any Problems, Please Feel Free to Contact Us. We Will Reply and Solve the Problem for You As Soon As Possible.
Details
Air Vent: There Is a Vent at the Side of the Tester, Which Can Effectively Dissipate Heat, Making the Tester Run More Stably and Last Longer.
Four Foot Pads: This Tester Has Four Round Supports, Which Can Ensure the Stability of This Item and Avoid Shaking When Used.
Knobs and Buttons: There Are Knobs and Buttons on the Operation Panel for You to Easily Operate This Tester.
Application
It Is Suitable for Laboratories, Electrical Repair Stores, and Other Places to Conduct a Variety of Battery Charging and Discharging Capacitance Test.
Specifications
Model: Ebc-a10h
Voltage: 100-240V
Plug: American Standard
Discharge Voltage: 0.00-30.00v (Minimum Step Size: 0.01v)
Charging Voltage: 0.00-22.00v (Minimum Step Size: 0.01v)
Discharge Current: 0.05-10.00a (Minimum Step Size: 0.01a)
Charging Current: 0.05-5.00a (Minimum Step Size: 0.01a)
Charging Method: Standard Charging (Support Nickel Hydrogen, Nickel Chromium, Lithium, Iron, Lithium, Lead Acid)
Low Voltage Test: 0.002-4.500v (Accuracy: 0.003v, Error ± 0.5%)
High Voltage Test: 4.50v-30.00v (Accuracy: 0.01v, Error ± 0.5%)
Current Test: 0.05-10.000a (Accuracy: 0.005a, Error ±0.5%)
Capacity Test: 10ah (Resolution: 0.001ah); 10ah-100ah (Resolution: 0.01ah); Above 100ah (Resolution: 0.1ah)
Connection Method: Four-wire Detection
Package Included
1* Tester
1* On-line Line
1* Power Cord
4* Test Clips
Notes
- Please Note That This Item Has a Built-in 24v Power Supply Module.
- A+ V+ Is Connected to the Positive Battery, and a- V- Is Connected to the Negative Battery.
- Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before You Order.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
