- LC200A portable meter is based on the LC resonant principle, adding high-speed micro-controller precision measurement calculation. The meter has wide measurement range and high precision, it's measuring range is below 1uH and 1pF. Wide measurement range, high accuracy, small size, light weight and portable.
- LC200A series can be powered by mini USB cable or included Φ5 DC power supply cable. Note: The power supply voltage is 5V. You can also install 4 AA batteries to power the meter. If the meter is not used for 5 minutes when it is battery powered, it will automatically turn off the power.
- There are five buttons. They are reset button in red, Hi.C, Hi.L, L/C and extended FUNC button in blue. Just press red the button to calibrate. Open circuit calibration in capacitance measuring mode. Short circuit calibration in inductance measuring mode.
- Capacitance: 0.01pF-100mF. Inductance: 0.001uH-100H. Frequency: 500KHz/500Hz-50KHz. Accuracy 1% of capacitance range 1pF~1uF, 5% of range 1uF~100mF, 1% of inductance range 1uH~1H, 5% of range 1H~100H.
- Package include: 1 x handheld LC meter, 2 x banana plug to alligator clip test leads, 1 x LCR kelvin alligator clip test lead, 1 x USB cable, 1 x charging cable, 1 x manual.
LC200A handheld inductance and capacitance measuring instrument is based on the principle of LC resonance. It adds high-speed microcontroller precision measurement and calculation and can measure inductance below 1uH and small capacitance less than 1pF. Wide measurement range, high accuracy, small size, light weight, convenient carry. It has flexible online calibration function at any time to maintain measurement accuracy. This instrument does not use any potentiometer adjustment. Calibration parameters are completely stored in the FLASH of the microcontroller, so power loss will not be lost. Compared with other potentiometer calibration methods, it is accurate and convenient.
Technical Parameters:
Capacitance measurement (C) ----- 0.01pF-10uF
Inductance measurement (L) ----- 0.001uH-100mH
Large inductance measurement (Hi.L) ----- 0.001mH-100H
Large capacitance measurement (Hi.C) ----- 1uF-100mF
Test frequency (L/C) ----- 500kHz
Test frequency (Hi.L) ----- 500Hz ~50KHz
Large capacitance measurement method ----- Charge-discharge
Effective display digits ----- 4 digits
Supply voltage ----- 5V
Working temperature ----- 0℃-40℃
Working humidity ----- ≤90%RH (At 40 ℃)
NOTE：
- The capacitor under test must be completely discharged, or the meter will be damaged.
- It needs more time to measure a big capacitance (Over 10mF, more than 1s. Over 100mF, about 8s).
- If the meter needs to switch the testing mode, it should be calibrated to keep measurement accuracy.
- For measuring the electrolytic capacitors, the selected mode should be 'Hi.C'.
